Corrosion. Structural Metals and Alloys (2017-2018)
This issue from the topic series “Corrosion” contains articles published by Trans Tech Publications in the 2017 - 2018 years. The volume presents readers with a wide range of scientific research results and engineering solutions in studying corrosion properties and corrosion behaviour of structural metals and alloys. We hope this collection will be useful and interesting to a broad audience of researchers and engineers from various modern manufacturing areas.
Preface
Chapter 1: Corrosion Behaviour of Carbon and Low Alloy Carbon Steels
A Case Study on Inner Corrosion of 3%Cr Casing Steel in the CO2 Environments
3rd Generation Hot-Dip Galvanized Steel Sheet for Automobile Manufacturing - Interface Reactions between Zinc and Metal Oxide
Corrosion Mechanism Analysis of a 20# Carbon Steel Lightning Rod on a Substation
Effect of Shot Peening on Microstructure and Properties of 34CrMo4 Alloy
Corrosion Behavior of Low Carbon Steel in Bioethanol Fuel Blends
Experimental Study on the Corrosion Behavior of Produced Fluid on J55 Steel during CO2 Flooding
Study of Rust Layer of TRIP Steels in Marine Environments
Corrosion Resistance of a Gradient Surface with Cr Alloying on Low-Carbon Steel
Tribocorrosion Behaviors of D40 Steel in Artificial Seawater
Influence of Rolling Force on Corrosion Resistance of Interstitial-Free Auto Sheet Steel
The Effect of Flue Gas Environment on the Corrosion Behavior of the Sulfuric Acid Dew-Point Corrosion Resistant Steel
Chapter 2: Corrosion Performance of Stainless Steels
Effect of Chlorine Ion on the Corrosion of 316L Austenitic Stainless Steel
Corrosion Resistance of TIG Welded Joints of Stainless Steels
Deliquescence of NaCl and Atmospheric Corrosion of 316L Stainless Steel
Experimental Investigation of Parameters and its Effect on IGC Attack in Ferritic Stainless Steel 430 Weldments
Effect of Cl- Concentration on Pitting Corrosion Property of Maraging Hardened Stainless Steel Based on Pourbaix Diagram
Mechanical and Electrochemical Properties of AISI4130/Austenitic Steels Dissimilar Welded Joints
The Effect of Sodium Chloride Concentration on Corrosion Resistance of Austenitic Stainless Steel 316L and SMA Weldment
Corrosion Resistance of Nitric Acid Passivated Cr-Ni-Mo Stainless Steel
Corrosion Characterization of AISI 304 Stainless Steel Filter
Effect of Thermal Cycle on Microstructure and Corrosion Behavior of Duplex Stainless Steel SAF 2205 Electron Beam Welded Joint
Crevice Corrosion of Duplex Stainless Steels by Cyclic Potentiodynamic Polarization and Potentiostatic Techniques
Effect of Solution Annealing Time on the Microstructure and Corrosion Resistance of Duplex Stainless Steel
The Interface Character Distribution and Intergrannular Corrosion Resistance of Duplex Stainless Steel UNS S32304
Effect of Secondary Phases Precipitation on Corrosion Resistance of Duplex Stainless Steels
Chapter 3: Corrosion Resistance of Non-Ferrous Alloys
Influence of Cr and Mn Addition and Heat Treatment on the Corrosion Behaviour of an AlSi3Mg Alloy
Effect of Structural Modification on Corrosion Behavior of Hypo Eutectic Al-Si Alloy
Evaluation on the Mechanical and Corrosion Resistance of ALDC 12 Al Alloy by Three Types of Heat Treatments
The Effect of Mg Content on Intergranular Corrosion of Al-Mg-Mn Alloys after Annealing
Effects of RE Micro-Alloying Additions on the Corrosion Behavior of an Al-Mg-Si Alloy
Corrosion Performance of Aluminum and Stannum as Beverage Packaging
Improvement of Mechanical Properties and Corrosion Resistance by Deformation Induced Precipitation in Al-Zn-Mg-Cu Alloy
Effects of the Casting Temperature in the Leakage of Zamak 5
Influence of Microstructural Parameters on the Corrosion Resistance of 7075 Aluminum Alloy
Influence of Sc Addition on the Corrosion Behavior of Medium Strength Al-Zn-Mg Alloy
Characterization of Intergranular Corrosion Defects in a 2024 T351 Aluminium Alloy
Corrosion of Aluminium Aerospace Alloys
Intergranular Corrosion Mechanism of Brazed Al-Mn-Cu-Si Alloy
Effect of Heat Treatments on Stress Corrosion Behavior of 7050 Al Alloys in 3.5% NaCl Solution
Effect of Chlorine Atoms for Development of Aluminum Corrosion
Influence of Corrosive Conditions on the Mechanical Performance of Flow Drill Screw Joints between Light Metals
Thermal Desorption Spectroscopy Study on the Hydrogen Behavior in a Plasma-Charged Aluminum
Change of Intergranular Corrosion Behavior along the Thickness in a Friction-Stir-Welded 7N01-T5 Aluminum Alloy
Corrosion Behaviors of Permanent Mold Cast Mg Alloy AJ62 with Varying Grain Structures in Automotive-Related Environments
Effect of Al Additions on Corrosion Performance of Sn-9Zn Solder in Acidic Solution
Corrosion of Sn-Zn-Bi Lead Free Solder in KOH Electrolyte
Corrosion Performance of Sn-9Zn and Sn-0.7Cuin 3.5% NaCl Solution
Effect of Phosphorus and Nickel on Electrochemical Migration of Sn-3Ag-0.7Cu Solder Paste in Simulated Body Fluid
Study on Magnetic and Corrosion Properties of Ce16Fe95-xCoxB8 (x=0-4) Alloys
Effect of Surface Potential Distribution on Corrosion Behavior of SnAgCu Solder/Cu Substrate Interface
Improving Corrosion Resistance of Hot Extruded Mg-Sn-Al-Ce Magnesium Alloy by Rapid Solidification
Microstructure and Phase Analyses on the Corrosion of SAC305 Solder in NaСl Solution
Effect of Ti Addition on Corrosion Properties of As-Cast and Hot-Rolled AM60 Magnesium Alloys
Electrochemical Investigation of Stellite 6 Alloy in Morpholine Corrosive Environment
Effect of Sn Addition on Corrosion Properties of As-Cast and Hot-Rolled AZ31 Magnesium Alloys
Effects of Sb and Zn Addition on Mechanical Properties and Corrosion Resistance of Sn–Ag–Cu Solders
Evaluation on the Corrosion and Wear Resistance of Welding Zone Welded with Plasma Transferred Arc Welding Method
The Effects of Water Flow Rate on Copper Corrosion
Effect of Sn and Cu on Corrosion Resistance of LaMgAlMnCoNi Type Alloys
Corrosion Properties of Sn-9Zn Solder in Acidic Solution
Polarization Study of Sn-0.7Cu Solder Alloy in 1M Hydrochloric Solution
Linear Potentiodynamic Characterization of ECAPed Biocompatible AZ91 Magnesium Alloy
Study of the Correlation between Microstructure and Corrosion Resistance of the AZ91D Magnesium Alloy
Investigation on the Dealloying Process of Mn75-xNi25Alx (x=0, 5, 10, 15, 20 at. %) Alloy Ribbons
Electrochemical-Based Characterization of the Corrosion Fatigue Behavior of Creep-Resistant Magnesium Alloys DieMag422 and AE42
The Influence of Ni Content on the Corrosion Resistance of Cu-Ni-Sn-C-P Sintered Alloys in Poor Quality Fuel
Relationship between Microstructure and Exfoliation Corrosion in Mg-14mass%Li-3mass%Al Cold-Rolled Alloy
Effect of Sn, Zn and Bi Addition on Corrosion Characteristics of Magnesium Alloys Sintered by Spark Plasma Sintering
Corrosion Mechanisms of New Wrought Mg-Al Based Alloys Alloying with Mn, Zn and Sn
Influence of β-Mg17Al12 Phase on Initial Pitting Process of AZ91D Magnesium Alloy
Chapter 4: High-Temperature Oxidation of Structural Metals
High-Temperature Corrosion of Ni3Al+ 2.9%Cr Alloy in Ar-0.2%SO2 Gas
Corrosion of Fe3Al-4Cr Alloys at 1000°C in N2-0.1%H2S Gas
High-Temperature Corrosion of Incoloy Alloy 800 in N2/H2S Gas
High Temperature Oxidation Behaviour of Ni-Cr-, Ti- and Fe-Based Alloys in Flowing Wet Gas Environment
Corrosion Behavior of Incoloy 825 in High Temperature Vapor Containing Sodium Chloride
Corrosion of 310S Austenitic Stainless Steel in Simulated Rocket Combustion Gas
High-Temperature Corrosion-Fatigue Behavior of Ductile Cast Irons for Exhaust Manifolds Applications
Oxidation of Experimental Ti-Si-Al Based Alloys
Local Surface Phase Stability during Cyclic Oxidation Process
Heat Resistance of Certain Structural Steels
Hot Corrosion of Alloy 617 OCC in Simulated USC Power Plant Environment
Numerical Analysis of Diffusion-Controlled Internal Corrosion by the Cellular Automata Approach
Intergranular Corrosion Sensitivity of Welded Joint of Super304H at High Temperature
Comparative Analysis on Corrosion Behavior of 316SS and 304SS in Subcritical and Supercritical Aqueous Systems
Chapter 5: Stress Corrosion Cracking of Structural Metals
Hydrogen Influence on Microstructure, Corrosion Resistance and Mechanical Properties of Low Alloy Steel and Explosively Cladded Steel Used for Hydrogen Storage Salt Caverns
Effects of Sensitization and Hydrogen on Stress Corrosion Cracking of 18-8 Type Stainless Steel
Stress Corrosion Cracking of NiCrMoV Steel Welded Joint under Applied Load in Simulated Environment of Low Pressure Nuclear Steam Turbine
About the Role of Hydrogen in Stress Corrosion Cracking of a 7xxx Aluminium Alloy (Al-Zn-Mg)
Mechanical Fields on Cross-Shaped Specimens for Stress Corrosion Cracking of Cold-Worked Austenitic Stainless Steels
An Experimental Method to Evaluate the Effect of Welding Residual Stress on Corrosion Fatigue Properties of Structural Steel in Synthetic Seawater
A Grain-Scale Model of Inter-Granular Stress Corrosion Cracking in Polycrystals
Chapter 6: Corrosion Degradation of Turbine Units
Analysis of Corrosion Attack on Kaplan Turbine Blades
The Analysis of Causes of the Damage of a Turbine Blade Made of Ti-6Al-4V Alloy
Combining 3D Scanning with Standard Microscopy Methods for Assessment of Pitting Corrosion in Turbine Blades
Failure of a Rotating Blade of a 200 MW Steam Turbine LP Rotor and Options for Eliminating other Similar Breakdowns
Crevice Corrosion of Low-Pressure Steam Turbine Materials in the Boiler Water Contained Impurity Ions
Stainless Steels as Erosion Resistant Materials for Hydraulic Machines
| Erscheinungsdatum | 26.11.2021 |
|---|---|
| Reihe/Serie | Specialized Collections |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 150 g |
| Themenwelt | Naturwissenschaften ► Physik / Astronomie ► Angewandte Physik |
| Naturwissenschaften ► Physik / Astronomie ► Atom- / Kern- / Molekularphysik | |
| Naturwissenschaften ► Physik / Astronomie ► Mechanik | |
| Technik ► Maschinenbau | |
| Schlagworte | alloy • Corrosion • corrosion rate • Corrosion resistance • Corrosive Environment • Crevice corrosion • Electrochemical Behaviour • Electrochemical Corrosion Properties • Electrochemical Impedance Spectroscopy • Heat treatment • High-temperature corrosion |
| ISBN-13 | 9783035712292 / 9783035712292 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
