Polymer Science, Engineering, and Sustainability, 2 Volume Set (eBook)

Enrique Saldivar-Guerra, Eduardo Vivaldo-Lima (Herausgeber)

eBook Download: EPUB

2025
3275 Seiten
Wiley (Verlag)
9781119820116 (ISBN)

Infos

An expert discussion of the basic science and production chain in the polymer industry

In this 2-volume set of Polymer Science, Engineering, and Sustainability: From Fundamentals to Applications in Synthesis, Characterization, and Processing, a team of distinguished researchers delivers a comprehensive discussion of polymer chemistry and industrial production.

The first volume covers polymer chemistry and engineering, as well as industrial polymer production. The second volume stresses physico-chemical, mechanical and advanced characterization techniques, polymer processing principles and transformation processes, advanced applications, and sustainability and recycling principles and processes.

Each volume features useful case studies, as well as sections focused on sustainability that covers renewable and biobased polymers and polymer recycling. They also emphasize sustainable practices guided by twelve principles of green chemistry.

Readers will also find:

• A thorough introduction to polymer chemistry and industrial polymer production
• Comprehensive explorations of physico-chemical characterization techniques
• Practical discussions of mechanical and advanced characterization techniques and polymer processing principles and transformation processes
• Complete treatments of sustainability and recycling principles and processes

Perfect for polymer scientists and engineers in industry, Polymer Science, Engineering, and Sustainability, 2 Volume Set will also benefit chemical engineers, materials scientists, and postgraduate students in polymer engineering or production programs.

Enrique Saldivar-Guerra, PhD, is Senior Researcher at the Center for Research in Applied Chemistry in Mexico.

Eduardo Vivaldo-Lima, PhD, is Full Professor at the Universidad Nacional Autonoma de Mexico, external academic member of the Institute for Polymer Research at the University of Waterloo, and Associate Editor of The Canadian Journal of Chemical Engineering.

Textauszug

List of Contributors

Manuel de Jesús Aguilar‐Vega
Materials Unit
Centro de Investigación Científica de Yucatán A.C.
Mérida, Yucatán, México

Roberto Alexander‐Katz†
Departamento de Física
Universidad Autónoma Metropolitana‐Iztapalapa
Ciudad de México, México

Parinaz Ataeian
Department of Chemical Engineering
Institute of Polymer Research
Waterloo Institute of Nanotechnology
University of Waterloo
Waterloo, ON, Canada

Carlos A. Ávila‐Orta
Department of Polymer Processing and Department of Advanced Materials
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, México

Juan José Benvenuta Tapia
Departamento de Ingeniería Química
Universidad Veracruzana
Veracruz, México

Víctor Manuel Chapela†
Polymer Research Group
Benemérita Universidad Autónoma de Puebla
Puebla, México

Guowei Chen
Department of Chemical Engineering
Institute of Polymer Research
Waterloo Institute of Nanotechnology
University of Waterloo
Waterloo, ON, Canada

Gladys de los Santos Villarreal
Department of Macromolecular Chemistry and Nanomaterials
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, México

Mariamne Dehonor‐Gómez
Department of Polymer and Advanced Materials
CIATEQ
A.C. Centro de Tecnología Avanzada
Lerma, Estado de México, México

Jason Dockendorff
Department of Chemistry
Institute for Polymer Research
University of Waterloo
Waterloo, ON, Canada

Marc A. Dubé
Department of Chemical and Biological Engineering
University of Ottawa
Ottawa, ON, Canada

Luis Ernesto Elizalde
Department of Macromolecular Chemistry and Nanomaterials
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, México

Adriana B. Espinoza‐Martínez
Department of Polymer Processing
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, México

Francisco J. Fuentes‐Talavera
Departamento de Madera, Celulosa y Papel
Universidad de Guadalajara
Jalisco, México

Luis Francisco Ramos‐de Valle
Department of Polymer Processing
Centro de Investigación en Química
Aplicada, Saltillo, Coahuila, México

Mario Gauthier
Department of Chemistry
Institute for Polymer Research
University of Waterloo
Waterloo, ON, Canada

Rubén González‐Núñez
Departamento de Ingeniería Química
Universidad de Guadalajara
Jalisco, México

Juan Guillermo Martínez-Colunga
Department of Polymer Processing
Centro de Investigación en Química
Aplicada, Saltillo, Coahuila, México

Ernesto Hernández‐Hernández
Department of Advanced Materials
Centro de Investigación en Química Aplicada (CIQA)
Saltillo, Coahuila, México

Adán Herrera‐Guerrero
Department of Polymer Processing
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, Mexico

Leticia Larios López
Department of Advanced Materials
Centro de Investigación en Química Aplicada (CIQA)
Saltillo, Coahuila, Mexico

Daniel C. Licea‐Saucedo
Departamento de Ingeniería Química
Universidad de Guadalajara
Jalisco, México

J. Esteban López‐Aguilar
Facultad de Química
Departamento de Ingeniería Química
Universidad Nacional Autónoma de México (UNAM)
Ciudad Universitaria
Ciudad de México, México
and
Faculty of Science and Engineering
Institute of Non‐Newtonian Fluid Mechanics
Swansea University
Swansea, UK

Carlos R. López‐Barrón
ExxonMobil Technology and Engineering Company
Baytown, TX, USA

María Isabel Loría‐Bastarrachea
Materials Unit
Centro de Investigación Científica de Yucatán A.C.
Mérida, Yucatán, México

Gabriel Luna‐Bárcenas
Tecnológico de Monterrey
School of Engineering and Sciences
Institute of Advanced Materials for Sustainable Manufacturing
Querétaro, México

Christopher W. Macosko
Department of Chemical Engineering and Materials Science
University of Minnesota
Minneapolis, MN, USA

Octavio Manero
Department of Rheology and Materials Mechanics
Instituto de Investigaciones en Materiales
Universidad Nacional Autónoma de México
Ciudad de México, México

Juan G. Martínez‐Colunga
Department of Polymer Processing
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, México

Neil T. McManus
Department of Chemical Engineering
Institute for Polymer Research
University of Waterloo
Waterloo, ON, Canada

Francisco J. Medellín‐Rodríguez
Department of Polymer Processing
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, México

Tizazu H. Mekonnen
Department of Chemical Engineering
Institute of Polymer Research
Waterloo Institute of Nanotechnology
University of Waterloo
Waterloo, ON, Canada

Antonio Monroy‐Alonso
Department of Polymer Processing
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, México

Ángel de Jesús Montes‐Luna
Materials Unit
Centro de Investigación Científica de Yucatán A.C.
Mérida, Yucatán, México

Dámaso Navarro Rodríguez
Department of Advanced Materials
Centro de Investigación en Química Aplicada (CIQA)
Saltillo, Coahuila, México

María Guadalupe Neira‐Velázquez
Department of Macromolecular Chemistry and Nanomaterials
Centro de Investigación en Química Aplicada (CIQA)
Saltillo, Coahuila, México

Estanislao Ortíz‐Rodríguez
Lyondellbasell
Zona Industrial del Potosí
San Luis Potosí, México

Jean‐Pierre Pascault†
Ingénierie des Matériaux Polymères
Laboratoire des Matériaux Macromoléculaires
Université de Lyon
Villeurbanne, France

Alexander Penlidis
Department of Chemical Engineering
Institute for Polymer Research
University of Waterloo
Waterloo, ON, Canada

M. Judith Percino
Polymer Research Group
Benemérita Universidad Autónoma de Puebla
Puebla, México

Elías Pérez
Instituto de Física
Universidad Autónoma de San Luis Potosí
San Luis Potosí, México

Aida A. Pérez‐Fonseca
Departamento de Ingeniería Química
Universidad de Guadalajara
Jalisco, México

Enrique Pérez‐Gutiérrez
Polymer Research Group
Benemérita Universidad Autónoma de Puebla
Puebla, México

Patricia Pérez‐Salinas
Department of Chemical Engineering
Facultad de Química
Universidad Nacional Autónoma de México
Ciudad de México, México

Evgen Prokhorov
Centro de Investigación y de Estudios Avanzados (CINVESTAV) del IPN
Unidad Querétaro, Querétaro, México

Daniel E. Ramírez‐Arreola
Departamento de Ingenierías
Universidad de Guadalajara
Jalisco, México

Luis F. Ramos‐de Valle
Department of Polymer Processing
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, México

Martha Roa‐Luna
Centro de Investigación en Química Aplicada (CIQA)
Saltillo, Coahuila, México

Jorge R. Robledo‐Ortiz
Departamento de Madera, Celulosa y Papel
Universidad de Guadalajara
Jalisco, México

Denis Rodrigue
Department of Chemical Engineering and CERMA
Université Laval
Quebec City, Quebec, Canada

María Teresa Rodríguez‐Hernández
Centro de Investigación en Química Aplicada (CIQA)
Saltillo, Coahuila, México

Jesús Gilberto Rodríguez‐Velázquez
Department of Polymer Processing
Centro de Investigación en Química Aplicada
Saltillo, Coahuila, Mexico

Alberto Rosas‐Aburto
Department of Chemical Engineering
Facultad de Química
Universidad Nacional Autónoma de México
Ciudad de México, México

Antelmo R. Y....

Produkt-Details

• Erscheint lt. Verlag: 17.11.2025
• Sprache: englisch
• Themenwelt: Naturwissenschaften ► Chemie ► Organische Chemie
• Schlagworte: Polymer characterization • polymer chemistry principles • Polymer engineering • polymerization processes • polymer reaction • polymer science applications • polymer sustainability • polymer synthesis • reversible deactivation radical polymerization
• ISBN-13: 9781119820116 / 9781119820116