Lipids (eBook)

Biochemistry, Biotechnology and Health

Michael I. Gurr, John L. Harwood, Keith N. Frayn, Denis J. Murphy, Robert H. Michell (Autoren)

eBook Download: EPUB

2016 | 6. Auflage
John Wiley & Sons (Verlag)
978-1-118-50110-8 (ISBN)

Infos

For the 6th Edition of this highly regarded textbook devoted to lipids, the title has been modified from Lipid Biochemistry to Lipids to acknowledge the coming together of biological and medical sciences, the increasingly blurred boundaries between them and the growing importance of lipids in diverse aspects of science and technology. The principal aims of this new edition - to inform students and researchers about lipids, to assist teachers and encourage further research - have not changed since previous editions.
 
Significant advances in lipid science have demanded yet another extensive rewriting for this edition, with the addition of two new authors, to cover new knowledge of genes coding for proteins involved in lipid metabolism, the many lipids involved in cell signalling, the roles of lipids in health and disease and new developments in biotechnology in support of agriculture and industry.
An introductory chapter summarizes the types of lipids covered and their identification and provides a guide to the contents. Chapters contain boxes illustrating special topics, key point summaries and suggested further reading.
Lipids: 6th Edition provides a huge wealth of information for upper-level students of biological and clinical sciences, food science and nutrition, and for professionals working in academic and industrial research. Libraries in all universities and research establishments where biological, medical and food and nutritional sciences are studied and taught should have copies of this excellent and comprehensive new edition on their shelves.                         

Autor

Michael Gurr was Visiting Professor in Human Nutrition at Reading and Oxford Brookes Universities, UK. John Harwood is a Professor of Biochemistry, School of Biosciences, Cardiff University, UK. Keith Frayn is Emeritus Professor of Human Metabolism, University of Oxford, UK. Denis Murphy is Professor of Biotechnology, School of Applied Sciences, University of South Wales, UK. Robert Michell is Professor of Biochemistry, School of Biosciences, University of Birmingham, UK.

Textauszug

Chapter 1
Lipids: Definitions, Naming, Methods and a Guide to the Contents of this Book

1.1 Introduction

Lipids occur throughout the living world in microorganisms, fungi, higher plants and animals. They occur in all cell types and contribute to cellular structure, provide energy stores and participate in many biological processes, ranging from transcription of genes to regulation of vital metabolic pathways and physiological responses. In this book, they will be described mainly in terms of their functions, although on occasion it will be convenient, even necessary, to deal with lipid classes based on their chemical structures and properties. In the concluding section of this chapter, we provide a ‘roadmap’ to help students find their way around the book, so as to make best use of it.

1.2 Definitions

Lipids are defined on the basis of their solubility properties, not primarily their chemical structure.

The word ‘lipid’ is used by chemists to denote a chemically heterogeneous group of substances having in common the property of insolubility in water, but solubility in nonaqueous solvents such as chloroform, hydrocarbons or alcohols. The class of natural substances called ‘lipids’ thus contrasts with proteins, carbohydrates and nucleic acids, which are chemically well defined.

The terms ‘fat’ and ‘lipid’ are often used interchangeably. The term fat is more familiar to the layman for substances that are clearly fatty in nature, greasy in texture and immiscible with water. Familiar examples are butter and the fatty parts of meats. Fats are generally solid in texture, as distinct from oils which are liquid at ambient temperatures. Natural fats and oils are composed predominantly of esters of the three-carbon alcohol glycerol with fatty acids, often referred to as ‘acyl lipids’ (or more generally, ‘complex lipids’). These are called triacylglycerols (TAG, see Section 2.2: often called ‘triglycerides’ in older literature) and are chemically quite distinct from the oils used in the petroleum industry, which are generally hydrocarbons. Alternatively, in many glycerol-based lipids, one of the glycerol hydroxyl groups is esterified with phosphorus and other groups (phospholipids, see Sections 2.3.2.1 & 2.3.2.2) or sugars (glycolipids, see Section 2.3.2.3). Yet other lipids are based on sphingosine (an 18-carbon amino-alcohol with an unsaturated carbon chain, or its derivatives) rather than glycerol, many of which also contain sugars (see Section 2.3.3), while others (isoprenoids, steroids and hopanoids, see Section 2.3.4) are based on the five-carbon hydrocarbon isoprene.

Chapter 2 deals mainly with lipid structures, Chapters 3 and 4 with biochemistry and Chapter 5 with lipids in cellular membranes. Aspects of the biology and health implications of these lipids are discussed in parts of Chapters 6–10 and their biotechnology in Chapter 11. The term ‘lipid’ to the chemist thus embraces a huge and chemically diverse range of fatty substances, which are described in this book.

1.3 Structural Chemistry and Nomenclature

1.3.1 Nomenclature, General

Naming systems are complex and have to be learned. The naming of lipids often poses problems. When the subject was in its infancy, research workers gave names to substances that they had newly discovered. Often, these substances would turn out to be impure mixtures but as the chemical structures of individual lipids became established, rather more systematic naming systems came into being and are still evolving. Later, these were further formalized under naming conventions laid down by the International Union of Pure and Applied Chemistry (IUPAC) and the International Union of Biochemistry (IUB). Thus, the term ‘triacylglycerols’ (TAGs – see Index – the main constituents of most fats and oils) is now preferred to ‘triglyceride’ but, as the latter is still frequently used especially by nutritionists and clinicians, you will need to learn both. Likewise, outdated names for phospholipids (major components of many biomembranes), for example ‘lecithin’, for phosphatidylcholine (PtdCho) and ‘cephalin’, for an ill-defined mixture of phosphatidylethanolamine (PtdEtn) and phosphatidylserine (PtdSer) will be mostly avoided in this book, but you should be aware of their existence in older literature. Further reference to lipid naming and structures will be given in appropriate chapters. A routine system for abbreviation of these cumbersome phospholipid names is given below.

1.3.2 Nomenclature, Fatty Acids

The very complex naming of the fatty acids (FAs) is discussed in more detail in Chapter 2, where their structures are described. Giving the full names and numbering of FAs (and complex lipids) at each mention can be extremely cumbersome. Therefore a ‘shorthand’ system has been devised and used extensively in this book and will be described fully in Section 2.1, Box 2.1. This describes the official system for naming and numbering FAs according to the IUPAC/IUB, which we shall use routinely. An old system used Greek letters to identify carbon atoms in relation to the carboxyl carbon as C1. Thus, C2 was the α-carbon, C3 the β-carbon and so on, ending with the ω-carbon as the last in the chain, furthest from the carboxyl carbon. Remnants of this system still survive and will be noted as they arise. Thus, we shall use ‘3-hydroxybutyrate’, not ‘β-hydroxy-butyrate’ etc.

While on the subject of chain length, it is common to classify FAs into groups according to their range of chain lengths. There is no standard definition of these groups but we shall use the following definitions in this book: short-chain fatty acids, 2C–10C; medium-chain, 12C–14C; long-chain, 16C–18C; very long-chain >18C. Alternative definitions may be used by other authors.

1.3.3 Isomerism in Unsaturated Fatty Acids

An important aspect of unsaturated fatty acids (UFA) is the opportunity for isomerism, which may be either positional or geometric. Positional isomers occur when double bonds are located at different positions in the carbon chain. Thus, for example, a 16C monounsaturated (sometimes called monoenoic, see below) fatty acid (MUFA) may have positional isomeric forms with double bonds at C7-8 or C9-10, sometimes written Δ7 or Δ9 (see Box 2.1). (The position of unsaturation is numbered with reference to the first of the pair of carbon atoms between which the double bond occurs, counting from the carboxyl carbon.) Two positional isomers of an 18C diunsaturated acid are illustrated in Fig. 1.1(c,d). Geometric isomerism refers to the possibility that the configuration at the double bond can be cis or trans. (Although the convention Z/E is now preferred by chemists instead of cis/trans, we shall use the more traditional and more common cis/trans nomenclature throughout this book.) In the cis form, the two hydrogen substituents are on the same side of the molecule, while in the trans form they are on opposite sides (Fig. 1.1a,b). Cis and trans will be routinely abbreviated to c,t (see Box 2.1).

Fig. 1.1 Isomerism in fatty acids. (a) cis-double bond; (b) a trans-double bond; (c) c,c-9,12-18:2; (d) c,c-6,9-18:2.

1.3.4 Alternative Names

Students also need to be aware that the term ‘ene’ indicates the presence of a double bond in a FA. Consequently, mono-, di-, tri-, poly- (etc.) unsaturated FAs may also be referred to as mono-, di-, tri- or poly- (etc.) enoic FAs (or sometimes mono-, di-, tri- or poly-enes). Although we have normally used ‘unsaturated’ in this book, we may not have been entirely consistent and ‘-enoic’ may sometimes be encountered! Furthermore it is important to note that some terms are used in the popular literature that might be regarded as too unspecific in the research literature. Thus shorthand terms such as ‘saturates’, ‘monounsaturates’, ‘polyunsaturates’ etc. will be avoided in much of this text but, because some chapters deal with matters of more interest to the general public, such as health (Chapter 10) and food science or biotechnology (Chapter 11), we have introduced them where appropriate, for example when discussing such issues as food labelling.

1.3.5 Stereochemistry

Another important feature of biological molecules is their stereochemistry. In lipids based on glycerol, for example, there is an inherent asymmetry at the central carbon atom of glycerol. Thus, chemical synthesis of phosphoglycerides yields an equal mixture of two stereoisomeric forms, whereas almost all naturally occurring phosphoglycerides have a single stereochemical configuration, much in the same way as most natural amino acids are of the L (or S) series. Students interested in the details of the stereochemistry of glycerol derivatives should consult previous editions of this book (see Gurr et al. (1971, 1975, 1980, 1991, 2002) and other references in Further reading). The IUPAC/IUB convention has now abolished the DL (or even the more recent RS) terminology and has provided rules for the unambiguous numbering of the glycerol carbon atoms. Under this system, the phosphoglyceride,...

Produkt-Details

• Erscheint lt. Verlag: 8.6.2016
• Sprache: englisch
• Themenwelt: Naturwissenschaften ► Biologie ► Biochemie
• Themenwelt: Technik
• Themenwelt: Weitere Fachgebiete ► Land- / Forstwirtschaft / Fischerei
• Schlagworte: Öle u. Fette • Biochemie • biochemistry • biological sciences • Biotechnologie i. d. Chemie • Biotechnology • Biowissenschaften • Cell signalling • Chemie • Chemistry • Food Science & Technology • genes coding • Health • Lebensmittelforschung u. -technologie • Life Sciences • Lipid metabolism • Lipids • Medical sciences • Oils & Fats • Öle u. Fette
• ISBN-10: 1-118-50110-1 / 1118501101
• ISBN-13: 978-1-118-50110-8 / 9781118501108