Eco Friendly and Sustainable Coatings for Wear Prone Industrial Applications
CRC Press (Verlag)
978-1-032-98662-3 (ISBN)
- Noch nicht erschienen (ca. Mai 2026)
- Versandkostenfrei
- Auch auf Rechnung
- Artikel merken
This book presents eco-friendly and sustainable coating solutions as both a remedy and a revolution. Each of its twelve chapters explores different aspects of these coatings, including advancements in coating technologies, their potential to extend the lifespan of wear-prone materials while adhering to sustainability principles, and the innovative development and application of biodegradable materials. It discusses fabrication techniques for new materials, transformation methods, and environmental implications, offering an overview of their sustainability and effectiveness.
Focuses on coatings used in industries to protect composite materials from wear, erosion, and corrosion
Explores sustainable coatings that can reduce repair and maintenance time while increasing component service life
Provides innovative insights into tribological coating applications to enhance friction and wear resistance
Aims to minimize the environmental impact of industrial operations, aligning with corporate sustainability goals and regulatory requirements
Includes contributions from industry professionals, supported by case studies
This book is intended for graduate students, researchers in materials engineering and industrial chemistry, and industry professionals.
Jimmy Mehta is presently working as an Assistant Professor, in the Department of Mechanical Engineering, School of Engineering, Manav Rachna University, Faridabad, Haryana (INDIA). She earned her B.Tech. from CDLMGEC, Sirsa in 2011, M. Tech from PTU Jalandhar (2013), and Ph.D. from Amity University Noida (2021). She has published over 32 papers in reputed journals and conferences, including SCI and SCOPUS, and 10 book chapters. Her research areas include tribology, nano-composites, composite materials, and coating of materials. She has good command over subjects including additive manufacturing, sustainable materials, metrology and quality assurance and has built robust expertise in additive manufacturing, 3D printing materials, and coatings, validated by NPTEL certifications from premier IITs, including two Elite + Silver badges. Also, she has served as a keynote speaker in ATAL FDP and International Webinars. Manikant Paswan is presently working as the Director of Sant Longowal Institute of Engineering and Technology, Longowal, Punjab (INDIA). He is basically Professor of Mechanical Engineering Department of National Institute of Technology, Jamshedpur (INDIA) He has over a hundred papers published in prestigious journals and has attended over 25 conferences. He was the supervisor and co-supervisor of eight PhDs, with another six in progress. He has also supervised 63+ M.Tech scholars and 31+ B.Tech project groups. He is a leading proponent of solar thermal heating systems and natural fiber composite materials. He also served as a Senate member of NIT Meghalaya from 2019 to 2022. He works as an academic council and Board of Studies member of various universities such as Sarla-Birla University Ranchi, Amity University Kolkata, Amity University Ranchi, Arka-Jain University Jamshedpur, etc. He works as a Nominated Moderator by AICTE of 2 Universities in Jharkhand, Ram Govind Singh Engineering College Koderma and Chandravanshi Engineering College Gadhwa. He has worked as an Assessor in NAAC and NBA for 3 years and 4 years, respectively. Pallav Gupta is presently working as an Associate Professor in the Mechanical Engineering Department of Madan Mohan Malaviya University of Technology, Gorakhpur, U.P. (INDIA). He completed his B.Tech. (Honors) from the Department of Mechanical Engineering, Integral University, Lucknow, INDIA, in 2009, Qualified GATE in 2009 with AIR-3291, and then completed his M.Tech. (Honors) from I.I.T. (B.H.U.), INDIA in 2011, followed by the Ph.D. in 2015 from I.I.T.(B.H.U.), INDIA. His area of research includes Material Processing, Advanced Manufacturing Technology and Composite Materials, Mechanical Behaviour, and Corrosion. He has over 09 years of teaching and research experience. He has published over 100 research papers in peer-reviewed journals and at reputed international and national conferences in India and abroad. Apart from this, he has also published 16 chapters in books published by Taylor and Francis and several other internationally reputed publishing houses. Many students have completed their summer internships and B.Tech. Projects and M.Tech. Dissertations under his guidance. 07 scholars have completed, and 02 are registered for their Ph.D. research work under his Supervision in the area of advanced materials and processing.
1. Development and Characterization of Sustainable Anti-Corrosion Coatings 2. Performance and Environmental Impact of Sustainable Biodegradable 3. Advances in Material Technology for the Development of Sustainable Coatings 4. Evaluating Environmental Impact in Sustainable Coating Applications 5. Bio-based Polymers for Improved Wear Protection: An Eco-Friendly approach 6. An Overview on Technological Changes towards Green Electrodeposition: Principles, Applications and Challenges 7. Eco Friendly Coatings Using Bio Based Polymers for Enhanced Wear Protection 8. Sustainable Coatings: Challenges and Opportunities 9. Introduction to Eco-Friendly and Sustainable Coatings: Transforming Industrial Practices 10. Microwave-based Wear Resistance Coating: An Eco-friendly, Sustainable Solution 11.Exploring Wear Resistance of Sustainable Coatings: Challenges and Opportunities 12. Sustainable Surface Treatments: Green Coatings for Industrial Wear Resistance 13. Impact of processing variables on the development of eco-friendly and sustainable coatings 14. Impact of processing variables on the development of eco-friendly and sustainable coatings
| Erscheint lt. Verlag | 26.5.2026 |
|---|---|
| Reihe/Serie | Recent Advances in Materials for Nanotechnology |
| Zusatzinfo | 3 Tables, black and white; 29 Line drawings, black and white; 12 Halftones, black and white; 41 Illustrations, black and white |
| Verlagsort | London |
| Sprache | englisch |
| Maße | 156 x 234 mm |
| Themenwelt | Technik ► Elektrotechnik / Energietechnik |
| Technik ► Maschinenbau | |
| ISBN-10 | 1-032-98662-X / 103298662X |
| ISBN-13 | 978-1-032-98662-3 / 9781032986623 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
