Design of Optimized Broadband Excitation Signals for Stable Impedance Spectroscopy Measurements
Seiten
2025
Universitätsverlag Chemnitz
978-3-96100-240-5 (ISBN)
Universitätsverlag Chemnitz
978-3-96100-240-5 (ISBN)
Electrochemical impedance spectroscopy requires linearity, causality, and time invariance for reliable measurements, necessitating precise excitation signal design. This thesis presents a methodology for multisine excitation signal optimization through systematic determination of amplitude, frequency distribution, and phase angles. The framework addresses limitations in conventional approaches, particularly for systems undergoing state changes during low-frequency measurements. A novel regularized linear Kramers-Kronig (rLKK) approach evaluates impedance spectra consistency and serves as feedback for signal optimization. Three phase optimization strategies are introduced: an RPG-based metaheuristic that balances stability and linearity constraints, a sigmoid transformation that minimizes crest factor while maintaining linearity, and a two-phase approach that first minimizes state-of-charge variation then optimizes crest factor. Validation on lithium-ion batteries demonstrated quantifiable improvements: 216 ppm deviation and 0.02% overall measurement deviation-10 times lower than published results while reducing acquisition time by factors of 3-9. The proposed stabilization technique for transient behavior further reduced deviations to 84 ppm. When applied to bioimpedance spectroscopy, the methodology accelerated measurement speed by a factor of 19 and improved accuracy by a factor of 2.67 compared to related works while enhancing robustness to noise.
| Erscheinungsdatum | 27.03.2025 |
|---|---|
| Reihe/Serie | Scientific Reports on Measurement and Sensor Technology ; 32 |
| Zusatzinfo | Illustrationen, Diagramme |
| Verlagsort | Chemnitz |
| Sprache | englisch |
| Maße | 148 x 210 mm |
| Gewicht | 441 g |
| Themenwelt | Technik ► Elektrotechnik / Energietechnik |
| Schlagworte | Impedanzspektroskopie • Messtechnik • Signalverarbeitung • Spektralanalyse |
| ISBN-10 | 3-96100-240-1 / 3961002401 |
| ISBN-13 | 978-3-96100-240-5 / 9783961002405 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
Mehr entdecken
aus dem Bereich
aus dem Bereich
Grundlagen, Systemtechnik und Analysen ausgeführter Beispiele …
Buch | Softcover (2025)
Springer Vieweg (Verlag)
CHF 55,95
Wegweiser für Elektrofachkräfte
Buch | Hardcover (2024)
VDE VERLAG
CHF 67,20
Planungsfehler vermeiden – Probleme analysieren – Arbeitszahlen …
Buch | Softcover (2024)
VDE VERLAG
CHF 61,60