Instrumentation Level 4 Trainee Guide, Binder

NCCER (Autor)

Loseblattwerk

2005 | 2nd edition
Pearson (Verlag)
978-0-13-108923-5 (ISBN)

Infos

This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Digital Logic Circuits, Instrument Calibration and Configuration, Performing Loop Checks, Troubleshooting and Commissioning a Loop, Tuning Loops, Programmable Logic Controllers, Disturbed Control Systems and Analyzers.

 

Instructor Supplements

Instructors: Product supplements may be ordered directly through OASIS at http://oasis.pearson.com. For more information contact your Pearson NCCER/Contren Sales Specialist at http://nccer.pearsonconstructionbooks.com/store/sales.aspx.



Annotated Instructor's Guide (AIG) Paperback 0-13-108924-2
AIG Binder 0-13-108925-0
Computerized Testing Software 0-13-109124-7
Transparency Masters 0-13-109121-2

Inhalt

12401-03 Digital Logic Circuits (10 Hours) Describes the various electronic circuits and gates used in digital control circuits and the truth tables for each. Covers variations on gates, such as flip-flops, shift registers, and counters.

 

12402-03 Instrument Calibration and Configuration (65 Hours) Introduces methods of instrumentation calibration, including the three- and five-point methods. Covers components that require calibration in pneumatic, analog, and smart loops, as well as methods commonly used to calibrate these components.

 

12403-03 Performing Loop Checks (7.5 Hours) Covers loop check steps, including verifying mechanical installation, validating that the loop has correct tag numbers, performing loop checks, and finally proving the loop.

 

12404-03 Troubleshooting and Commissioning a Loop (10 Hours) Teaches methodical troubleshooting techniques used to locate problems in control loops. Also addresses how to isolate a loop in order to troubleshoot it. Covers commissioning of a loop once it is repaired, loop checked, and calibrated.

 

12405-03 Tuning Loops (15 Hours) Introduces formulas and their applications to PID control. Offers a theory-based approach to PID control and its application in industrial process control. Addresses open, closed, and visual loop tuning.

 

12406-03 Programmable Logic Controllers (10 Hours) Introduces the application of PLCs in industrial process control, as well as the binary numbering system used in computer-based control. Covers components of PLCs, including power supplies, I/O modules, processor modules, types of communication bus, and memory.

 

12407-03 Disturbed Control Systems (10 Hours)

Describes how DCS was developed by combinitechnologies of single loop control, direct digisupervisory control. It covers DCS basic hardware requhow control loops are implemented into a DCS, types of data transmission used in DCS, communication protocohuman interfaces.

 

12408-03 Analyzers (20 Hours) Defines various types of analyzers and their applications in industrial process control. Includes a discussion of analyzers that measure or monitor variables such as density, specific gravity, viscosity, turbidity, flashpoint, oxidation-reduction potential (ORP), pH, conductivity of a liquid, oxygen, carbon monoxide, carbon dioxide, hydrogen sulfide, total hydrocarbon content (THC), and particulates in a clean room. Also defines chromatography and ultraviolet and infrared analyzers.  

Produkt-Details

• Erscheint lt. Verlag: 7.6.2005
• Sprache: englisch
• Gewicht: 1592 g
• Themenwelt: Technik ► Bauwesen
• ISBN-10: 0-13-108923-4 / 0131089234
• ISBN-13: 978-0-13-108923-5 / 9780131089235
• Zustand: Neuware