Drilling Fluids Processing Handbook
Seiten
2004
Gulf Publishing (Verlag)
9780750677752 (ISBN)
Gulf Publishing (Verlag)
9780750677752 (ISBN)
Written by some of the most well-respected names in the world for drilling, this edition covers various aspects of drilling solids control, including chapters on drilling fluids, cut-point curves, mud cleaners, and many other pieces of equipment.
Written by the Shale Shaker Committee of the American Society of Mechanical Engineers, originally of the American Association of Drilling Engineers, the authors of this book are some of the most well-respected names in the world for drilling. The first edition, Shale Shakers and Drilling Fluid Systems, was only on shale shakers, a very important piece of machinery on a drilling rig that removes drill cuttings. The original book has been much expanded to include many other aspects of drilling solids control, including chapters on drilling fluids, cut-point curves, mud cleaners, and many other pieces of equipment that were not covered in the original book.
Written by the Shale Shaker Committee of the American Society of Mechanical Engineers, originally of the American Association of Drilling Engineers, the authors of this book are some of the most well-respected names in the world for drilling. The first edition, Shale Shakers and Drilling Fluid Systems, was only on shale shakers, a very important piece of machinery on a drilling rig that removes drill cuttings. The original book has been much expanded to include many other aspects of drilling solids control, including chapters on drilling fluids, cut-point curves, mud cleaners, and many other pieces of equipment that were not covered in the original book.
1. Historical Perspective and Introduction
2. Drilling Fluids
3. Solids Calculation
4. Cut Points
5. Tank Arrangement
6. Scalping Shakers and Gumbo Removal
7. Shale Shakers
8. Settling Pits
9. Gas Busters, Separators, and Degassers
10. Suspension, Agitation, and Mixing of Drilling Fluids
11. Hydrocyclones
12. Mud Cleaners
13. Centrifuges
14. Use of the Capture Equation to Evaluate the Performance of Mechanical Separation Equipment Used to Process Drilling Fluids
15. Dilution
16. Waste Management
17. The AC Induction Motor
18. Centrifugal Pumps
19. Solids Control in Underbalanced Drilling
20. Smooth Operations
| Erscheint lt. Verlag | 9.12.2004 |
|---|---|
| Verlagsort | Oxford |
| Sprache | englisch |
| Maße | 152 x 229 mm |
| Gewicht | 1210 g |
| Themenwelt | Technik ► Bergbau |
| ISBN-13 | 9780750677752 / 9780750677752 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
Mehr entdecken
aus dem Bereich
aus dem Bereich
technische Grundlagen, Risikomanagement, Umweltauswirkungen
Buch | Hardcover (2023)
Hanser (Verlag)
CHF 139,95
Toleranzen und Zeichnungsangaben; Prüfbescheinigungen; Technische …
Buch | Softcover (2024)
DIN Media (Verlag)
CHF 269,95
Buch | Softcover (2024)
DIN Media (Verlag)
CHF 349,95
