Characterization of Minerals, Metals, and Materials 2020 (eBook)

Jian Li, Mingming Zhang, Bowen Li, Sergio Neves Monteiro, Shadia Ikhmayies, Yunus Eren Kalay, Jiann-Yang Hwang, Juan P. Escobedo-Diaz, John S. Carpenter, Andrew D. Brown (Herausgeber)

eBook Download: PDF

2020
751 Seiten
Springer International Publishing (Verlag)
978-3-030-36628-5 (ISBN)

Infos

This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include advanced characterization methods, minerals, mechanical properties, coatings, polymers and composites, corrosion, welding, magnetic materials, and electronic materials. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.

 

Inhalt

Preface 5
Contents 7
About the Editors 16
Part I Mineral Processing and Analysis I 24
1 Characterization of Iron Ore Sinter Samples by Automated SEM 25
2 Effects of Sintering Temperature and Time on Preparation of Refractory Materials from Ferronickel Slag Under Microwave Irradiation 34
3 Non-isothermal Carbothermic Reduction Kinetics of Calcium Ferrite 43
4 Gasificating Dephosphorization During the Carbothermic Reduction of Medium Phosphorus Iron Ore Concentrate in the Presence of Na?CO? and SiO? 54
5 Trends in Characterization and Beneficiation of Non-ferrous Metallic Ores in Nigeria 65
6 Kinetics of Coke Gasification Reaction Catalyzed by Alkali Carbonates 74
Part II Advances in Characterization Methods II 84
7 Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Steel Sheet Parts 85
8 Austenite Stability Under Focused Ion Beam Milling 96
Part III Minerals Processing and Analysis II 104
9 Experimental Research on Pellet Production with Boron-Containing Concentrate 105
10 Leaching of Platinum Group Metals from Automobile Spent Catalyst 117
11 Characterization on the Behaviors of Ca and Si Constituents During the Consolidation of Ferruginous Manganese Ores 126
12 Microscopic Appearance Transformation of Bornite During Acid Leaching and Bioleaching 136
13 Pb(II) Removal from Acidic Wastewater by Magnetic Manganese Ferrites Synthesized from Ferromanganese Ores 144
14 Recovery of Valuable Metals from the Leaching Tailings from the Arsenic/Nickel/Cobalt Residue 154
Part IV Characterization of Mechanical Properties I 166
15 Effect of Microstructure on Cleavage Fracture of Thick-Section Quenched and Tempered S690 High-Strength Steel 167
16 Effect of Thermal Aging on Impact Toughness of Electron Beam-Welded AISI 316 Stainless Steel 181
Part V Mineral Processing and Analysis III 193
17 Preparation and Photocatalytic Properties of Mo-Doped TiO?@Fly Ash Cenospheres for Degradation of Methylene Blue 194
18 Removing Arsenic from the NiSO? Solution Using Modified D301 Resin 204
19 Activated Carbon Prepared from Bituminous Coal/Poplar Blends by Direct KOH Activation 215
20 Preparation of Thermal Insulation Materials from Ferronickel Slag with Addition of Fly Ash Cenosphere 226
21 Leaching of Copper, Cobalt, and Nickel from Complex Ore 236
Part VI Characterization of Corrosion Resistance 246
22 Corrosion Inhibition Effect of Clove Essential Oil Extract with Basil and Atlas Cedar Oil on Mild Steel in Dilute Acid Environment 247
23 Effect of Dual Phase Stabilization via Varying Ti/Nb Ratios on the Pitting Behavior of AISI 347 Welds 259
24 Corrosion Resistance of GX4CrNiMo16-5-1 Martensitic, 316L Austenitic, and 904L Austenitic Stainless Steels Subjected to High Temperature Variation 269
Part VII Characterization of Electronic and Magnetic Materials 276
25 Influence on the Structural and Magnetic Properties of the Pre-alloyed Gas-Atomized Maraging Steel Powder During Mechanical Milling 277
26 Phase Diagram of the InP Binary System 288
Part VIII Characterization of Mechanical Properties II 294
27 Formation of the Carbon-Enriched Zone and Its Evolution During the Long-Term Aging Process for 9% Cr-CrMoV Dissimilar Welded Joint 295
28 The Evolution of Precipitates in a Novel Heat-Resistant Martensitic Steel During Creep 306
Part IX Characterization of Polymers and Composites I 313
29 Synthesis and Characterization of Ultra-Hard Ceramic AlMgB??-Based Materials Obtained from AlxMgy Intermetallic Powder and Boron Powder by the Spark Plasma Sintering 314
30 Microstructure Evolution of Additively Manufactured TiC Reinforced Graded Metal Matrix Composite 319
31 A Bibliometric Analysis of the Strategy and Performance Measurement of the Polymer Matrix Nanomaterials Development Scenario Globally, and the Participation of Brazil 329
32 Evaluation of Biodiesel Obtained from Waste Cooking Oil Purified with a Modified Clay 343
Part X Characterization of Polymers and Composites II 356
33 Mechanical Behavior of Thermoplastic Filaments Fabricated with the Fused Modeling Deposition Technique 357
34 Characterization of a Brazilian Kaolin and Its Sorption Ability to Mineral Oils 364
35 Fabrication of Ultra-High Molecular Weight Polyethylene Membrane and Evaluation of Physical Characteristics for Wastewater Treatment 371
Part XI Poster Session 378
36 A Comparison Between Graphene Oxide and Reduced Graphene Oxide as Reinforcement Agents in Polypropylene Nanocomposite Using Irradiated Polypropylene as Compatibilizer 379
37 A New Method to Obtain Cellulose Nanofiber from Wood 389
38 Analysis of ?´ (Cu?Ti) Precipitation During Isothermal Aging of a Cu–4 wt%Ti Alloy 396
39 Analysis of Nanoscale Iron Oxide Morphology 406
40 Analysis of the Effect of Marine Salinity in Durability of Red Ceramics Calcinated in Different Temperature 412
41 Application of Nanoparticles of ZnO and ZnO-Doped-Ag in Polymeric Blend of HMSPP/SEBS for Biocide Activity 421
42 Characterization and Metallurgical Performance of Titangarnet 428
43 Characterization by FTIR of Oxidized Pyrargyrite with Sodium Sulfide 436
44 Characterization by FTIR of Sphalerite Obtained in the Flotation Without Collector in the Presence of Ferric Iron 442
45 Characterization of Bentonite Beneficiation Residue for Use in Structural Ceramics 449
46 Characterization of Clay Mix with Incorporation of Granite Waste for the Production of Ceramic Tiles 458
47 Characterization of Hydrogels for Release of Cosmetic Assets Containing Nanoemulsions of Mandellic Acid in Different Concentrations of Pseudoboehmite 465
48 Chemical and Mineralogical Characterization of a Cuprite–Miargyrite Ore and Proposal of Elimination of Semimetals by Alkaline Bath 478
49 Chemical Characterization and Mineralogical Analysis of Mining-Metallurgical Tailing from the State of Morelos 487
50 Development and Characterization of a Luminescent Coating for Asphalt Pavements 497
51 Effect of Alloying Elements on Age Hardening and Coarsening of ?? Precipitates in Isothermally Aged Fe–Ni–Al Based Alloys 506
52 Effect of Different Ti-Sn Intermetallic Compounds Addition on Synthesis of Ti?SnC by Self-Propagating High-Temperature Combustion Technique 520
53 Dynamic Mechanical Behaviour of Lean Duplex Stainless Steel 2101 528
54 Capillary Absorption Evaluation of Different Mortars Applied in Civil Construction 539
55 Fundamental Study on Wettability of Pure Metal by Liquid Sodium 546
56 How to Measure High-Temperature Heat Capacity Reliably by Drop Calorimetry 555
57 Improvement Properties of Polypropylene by Graphene Oxide Incorporation 563
58 Influence of Sealing Mortar in the Strength of Compression of the Structural Masonry Ceramic 572
59 Influence of the Reduced Graphene Oxide Incorporation on Properties of Acrylonitrile Butadiene Styrene (ABS) 580
60 Inhibition of Flame Propagation in Nanocomposites with Expanded Polystyrene Recycled Clay, Gypsum, and Titanium Dioxide 589
61 Investigating the Effect of Sintering Temperature on Structural and Tribological Properties of a Nanostructured Ti–20Nb–13Zr Alloy for Biomedical Applications 599
62 Investigation on Mechanical and Thermal Behaviours of PBAT/PLA Blend Reinforced with Reduced Graphene Oxide Nanosheets 610
63 Iron Ore Fines Granulation in a New High Speed Mixing Granulator 619
64 Leaching of Pre-Oxidated Pyrargyrite with Na?S?O? 628
65 Mechanical and Morphological Properties of Hybrid Composites Based on Recycled LDPE/EVA Blend Reinforced with Clay and Babassu Fiber Residues 637
66 Preparation of Lithium Ion Battery Anode Materials from Precipitation Flotation Product 646
67 Processing and Characterization of Polyethylene-AgNPs Films—Biocide Effect 653
68 Production and Characterization of PBAT Reinforced with Clay and Graphene Oxide Nanosheets—A Comparative Study 663
69 Study of Styrene Effect on Non-radiation Grafting of Vinyl Benzyl Chloride on to Polyethylene-Based Anion Exchange Membrane 674
70 Study on the Separation of Zinc and Iron in Electric Arc Furnace Baghouse Dusts and Its Kinetics 684
71 Synthesis and Characterization of BaTiO? Doped with Eu³? by the Reaction Solid-State Method 696
72 Synthesis and Characterization on Copper Oxide Anode of Lithium-Ion Battery 703
Author Index 711
Subject Index 715

Produkt-Details

• Erscheint lt. Verlag: 23.1.2020
• Reihe/Serie: The Minerals, Metals & Materials Series
• Reihe/Serie: The Minerals, Metals & Materials Series
• Zusatzinfo: XXIV, 751 p. 386 illus., 289 illus. in color.
• Sprache: englisch
• Themenwelt: Technik ► Maschinenbau
• Schlagworte: conference proceedings • Materials Characterization • Materials Processing • Materials Science • metals • Mineral Resources • minerals
• ISBN-10: 3-030-36628-6 / 3030366286
• ISBN-13: 978-3-030-36628-5 / 9783030366285