TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings (eBook)
XXII, 1731 Seiten
Springer International Publishing (Verlag)
978-3-030-05861-6 (ISBN)
The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.
The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.
Contents 5
Part I 2019 International Metallurgical Processes Workshop for Young Scholars (IMPROWYS 2019) 23
1 Ab Initio Molecular Dynamics Study on the Dissolution of Interfacial Iron Oxides in Hot Compressive Bonding Combined with Experiments 24
2 Effect of MgO Content on the Properties of Magnesia Fluxed Pellets 37
3 Numerical Simulation of Three-PhaseFlow of Gas-Stirring Micro-phenomenonDuring Ladle Furnace Process 49
4 The Effect of pH and TemperatureDuring Carbonation Process on SpentDie Cleaning Solution from AluminiumExtrusion Industry 59
5 Improvement of Center Segregationin Continuously Cast Blooms by ConvexRoll Soft Reduction 70
6 Effects of a Top-Down Flow on Gas–SolidFluidization State in a Bubble FluidizedBed 81
7 Development of Bio-treated Oil PalmFiber Reinforced Kaolin MatrixComposites for Building BricksApplication 95
8 Effect of Roll Surface Profileon Thermal-Mechanical Behaviorof Continuously Cast Bloom in SoftReduction Process 110
9 Thermodynamic Study on Substitution of CO? for Ar or O? in AOD Smelting Process 121
Part II 2019 Symposium on Functional Nanomaterials: Synthesis, Integration, and Application of Emerging Nanomaterials 128
10 Recent Progress on Metal OxideSemiconductor Thin Film TransistorApplication via Atomic Layer DepositionMethod 129
11 Adsorption of Fluoride Gasesin Aluminum Production by Usingof Nanotechnology 135
12 Experimental Study on Competitive Adsorption of SF? Decomposed Components on Nitrogen-Doped TiO? Nanotubes Sensor 151
13 Fabrication of HardystoniteNano-bioceramic Coating on 306LStainless Steel Substrate UsingElectrophoretic Method and Evaluationof Its Corrosion Resistance to ImproveMedical Performance 157
14 Fabrication of MonodispersedNeedle-Sized Hollow Core PolystyreneMicrospheres 169
15 Hydrangea-Like VS? Microspheres: A Novel Structure Material for High-Performance Electrochemical Capacitor Electrode 179
16 Preparation and Properties of NovelGraphene Composites 187
17 Synthesis and Characterization of SilverNanoparticles Using Simple PolyolMethod 198
Part III Additive Manufacturing and Welding: Physical and Mechanical Metallurgy of Rapidly Solidified Metals 208
18 Differentiating Defect Types in LENS™ Metal AM via In Situ Pyrometer Process Monitoring 209
19 Laser-Additive Repair of CastNi–Al–Bronze Components 217
20 Comparative Austempering Response Between Weld Metals of ADI Weldments With and Without Cerium Addition 229
21 Effects of Beam Oscillation on Porosity and Intermetallic Compounds Formation of Electron Beam Welded DP600 Steel to Al-5754 Alloy Joints 250
22 Effects of Ultrasonic Micro-forging on 304 Stainless Steel Fabricated by WAAM 261
23 Interface MicrostructuralCharacterization of Titanium to StainlessSteel Dissimilar Friction Welds 269
24 Mechanical Property Characterizationof Single Scan Laser Tracks of NickelSuperalloy 625 by Nanoindentation 279
25 Metallurgical Characteristics of LaserPeened 17-4 PH SS Processed by LENSTechnique 289
Part IV Additive Manufacturing for Energy Applications 296
26 Prototyping of a Laboratory-ScaleCyclone Separator for Biofuel Productionfrom Biomass Feedstocks Using a FusedDeposition Modeling Printer 297
Part V Additive Manufacturing of Metals:Applications of SolidificationFundamentals 306
27 Phase-Field Modeling of Microstructure Evolution of Binary and Multicomponent Alloys During Selective Laser Melting (SLM) Process 307
28 Phase-Field Simulationof Microstructure Evolution in DirectMetal Laser Sintered AlSi10Mg 316
29 Laser Interaction with Surface in Powder Bed Melting Process and Its Impact on Temperature Profile, Bead and Melt Pool Geometry 324
30 Evolution of a Gradient Microstructurein Direct Metal Laser Sintered AlSi10Mg 335
31 Finite Element Analysis of ParticlePushing During Selective Laser Meltingof AlSi10Mg/AlN Composites 343
32 Numerical Simulationon the Single-Crystal Grain Structureof GH4169 Superalloy Steel in the SpiralGrain Selector Using Procast Software 351
33 Powder Packing Density and Its Impacton SLM-Based Additive Manufacturing 358
Part VI Additive Manufacturing of Metals: Fatigue and Fracture III 371
34 About a Digital Twin for the FatigueApproach of Additively ManufacturedComponents 372
35 Effect of the Surface Finish on the CyclicBehavior of Additively ManufacturedAlSi10Mg 384
36 Effect of Heat Treatments on FatigueProperties of Ti–6Al–4V and 316LProduced by Laser Powder Bed Fusionin As-Built Surface Condition 396
37 Fracture Toughness and Fatigue Strengthof Selective Laser MeltedAluminium–Silicon: An Overview 407
38 The Effect of Heat Treatmentand Alloying of Ni–Ti Alloy with Copperon Improving Its Fatigue Life 413
39 Effect of Adding Yttriumon the Inclusion Modification and ImpactToughness of E36 Shipbuilding Steel 421
Part VII Additive Manufacturing of Metals: Microstructural Evolution and Phase Transformations 431
40 Influence of Nitrogen on Microstructure, Mechanical Properties and Martensitic Phase Transformation of Co–26Cr–5Mo–5W Alloys by Selective Laser Melting 432
41 The Morphology, Crystallography,and Chemistry of Phases in Wire-ArcAdditively Manufactured NickelAluminum Bronze 442
42 Microstructure Evolution in Direct MetalLaser Sintered Corrax MaragingStainless Steel 453
43 The Microtexture and Tensile Propertiesof Continuous-Waveand Quasi-Continuous-Wave LaserPowder-Deposited Inconel 718 461
Part VIII Additive Manufacturing: Materials Design and Alloy Development 470
44 Alloy Design for Biomedical Applicationsin Additive Manufacturing 471
45 Surface Inoculation of AluminiumPowders for Additive ManufacturingGuided by Differential Fast ScanningCalorimetry 481
46 Mechanical Behavior and Microstructureof Porous Ti Using TiC as Reinforcement 490
47 Processing of Haynes® 282® Alloy by Laser Powder Bed Fusion Technology 497
Part IX Advanced High-Strength Steels III 505
48 Tensile Deformation Behavior of 1GPa-Grade TRIP-AidedMulti-microstructure Steels Studiedby In Situ Neutron Diffraction 506
49 Development of Advanced High-StrengthSteels for Automobile Applications 512
50 Effect of Carbon Content on Strengthening Behavior with Grain Refinement on Lath Martensite Structure 521
51 Assessment of the StrengtheningMechanisms Operating in MicroalloyedSteels During Cyclic Deformation UsingHigh-Resolution Electron BackscatterDiffraction 528
52 Effect of Niobium on Microstructureand Mechanical Properties of Nb–TiMicroalloyed Carbide-Free BainiticSteels 539
53 Effect of Inclusions Modified by Y-BasedRare Earth on the Corrosion Behaviorof EH36 Shipbuilding Steel 551
54 Microstructure and MechanicalProperties of Intercritical AnnealedMultiphase Ultrahigh Strength Steel 560
55 The Effect of Ni and Cu Additionon Mechanical Behaviorof Thermomechanically ControlledProcessed HSLA X100 Steels 567
Part X Advanced Magnetic Materials for Energy and Power Conversion Applications 579
56 Optimization of Magnetocaloric Properties of Ball-Milled La(Fe,Co,Si)??(H,C)? 580
57 Production of High-Resistivity ElectricalSteel Alloys by Substitution of Si with Aland Cr 586
58 Nanocrystalline Multifunctional Pr–CoCompounds 594
Part XI Advanced Microelectronic Packaging, Emerging Interconnection Technology, and Pb-free Solder 603
59 A Study on Electrical Conductivityof Micro Friction Stir-Welded DissimilarSheets for Hybrid Electric Vehicles(HEVs) 604
60 Micro-structure and Properties of Cu–0.3 wt%Ag Alloy Ultra-Fine Wires 613
61 Length Scale of the CellularMicrostructure Tailoring TensileProperties of Zn–20 wt%Sn–2 wt%CuSolder Alloy 620
62 Effect of Ag on the MechanicalProperties of Bi–Ag Solder Alloysby the Single-Lap Shear Test Method 628
Part XII Advances in Computational Methods for Damage Mechanics and Failure Phenomena 637
64 Parametrically Homogenized ContinuumDamage Mechanics (PHCDM) Modelsfor Composites from MicromechanicalAnalysis 638
65 Effect of Multi-gating Systemon Solidification of Molten Metals in SpurGear Casting: A Simulation Approach 647
Part XIII Advances in Surface Engineering 658
66 Corrosion Study of Boron NitrideNanosheets Deposited on Copper Metalby Electrophoretic Deposition 659
67 Effects of Process Parameterson the Zirconia Coating Preparedby Sol-Gel and Electrodeposition Process 664
68 The Study of Slurry Erosion Wear Behaviour of Coal Bottom Ash Slurry Handling Pipeline 674
69 Wear Characterization of Cemented Carbide Multipoint Cutting Tool Machining AISI 4140 at High Cutting Speed: Criteria for Materials Selection 688
71 Dry Sheet Metal Forming ThroughSelective Oxidized Tool Surfaces 696
72 Effect of Process Parameters on SurfaceProperties of Laser-Hardened Cast Iron 709
73 On Improvement in Surface Integrityof ?-EDMed Ti–6Al–4V Alloyby ?-ECM Process 720
74 Corrosion and Wear Resistance of PTFE-Al?O? Coatings Deposited on Aluminum Alloy by a Microblasting Process 729
Part XIV Algorithm Development in Materials Science and Engineering 737
75 Numerical Simulation of Ti6–Al4–VAlloy Diffusion Bonding Process Basedon Molecular Dynamics 738
Part XV Alloys and Compounds for Thermoelectric and Solar Cell Applications VII 751
76 Custom Pyrolytic Graphite–SteelThermocouple for High-TemperatureMeasurements 752
Part XVI Biological Materials Science 761
77 3D Contact and Strain in Alveolar BoneUnder Tooth/Implant Loading 762
78 Shear-Punch Testing of Human CranialBone and Surrogate Materials 768
79 Investigation of BiodegradableZn–Li–Cu Alloys for Orthopaedicand Cardiovascular Applications 778
80 Low-Temperature Air PlasmaModification of Electrospun SoftMaterials and Bio-interfaces 788
81 Accumulation of Biofilm on Ti–6Al–4VAlloy Fabricated Using Additive LayerManufacturing 796
82 Copper Recovery from Printed CircuitBoards from Smartphones ThroughBioleaching 806
83 Dependence of the Ferrovanadium Poweras Additive on Mechanical Propertyin Porous Ti 814
84 Effect of Compaction Pressureon Porosity and Mechanical Propertiesof Porous Titanium as Bone SubstituteMaterials 824
85 The Effect of Milling Time on Structural, Friction and Wear Behavior of Hot Isostatically Pressed Ti–Ni Alloys for Orthopedic Applications 834
Part XVII Bulk Metallic Glasses XVI 845
86 Perturbation Analysis of AmorphousAlloy Formation 846
87 Shockwave Consolidation to Create BulkMetallic Glass 853
Part XVIII Ceramic Materials for Nuclear Energy Research and Applications 864
88 Characterization of the IrradiationEffects in Nuclear Graphite 865
89 Irradiation Effects on Reactor ConcreteStructures 871
Part XIX Coatings and Surface Engineering for Environmental Protection 877
90 Electrochemical Mechanism and Preparation of Cr–Low-Carbon Steel Composite in a NaCl–KCl–NaF–Cr?O? Molten Salt 878
91 Diamond-Like Carbon Coating for DrillCollars: Test Experiences 890
92 Inhibition Effect of Essential Oil Extractson the Corrosion Inhibition of Mild Steelin Chloride–Sulphate Media 901
93 Corrosion Properties of Steel Sheetwith Zinc-Base Alloy Coatings 911
94 Effect of Heat Treatmenton the Localized Corrosion Resistanceof S32101 Duplex Stainless Steelin Chloride/Sulphate Media 920
95 Study of Mechanisms of CobaltElectrodeposition by Meansof Potentiodynamic Polarization Curves 928
Part XX Computational Approaches for Big Data, Artificial Intelligence and Uncertainty Quantification in Computational Materials Science 938
96 Artificial Intelligent and SimulationNanostructure of Ceramic 939
Part XXI Computational Thermodynamics and Kinetics 954
97 Kinetics Calculation and Analysis of AlNPrecipitation in ML40Cr Steel Austenite 955
98 Study of Dendrite Growth Under ForcedConvection in Superalloy Solidificationby Multiphase-Field Coupled LatticeBoltzmann Method 964
99 Modeling of Volume Diffusion-ControlledPhase Transformations in MultiphaseMulticomponent Alloy Systemsby Minimization of Gibbs Energy 975
100 A New Method for Calculationof Vapor–Liquid Equilibrium (VLE)of Au–Cu Alloy System 982
101 Ab Initio Study on the OxidationMechanism of Millerite 991
102 Kinetic Model of Silica Dissolution in CaO–SiO?–MgO–Al?O? Slag System 999
Part XXII Deformation and Damage Behavior of High Temperature Alloys 1008
103 Origin of the Significant Impact of Taon the Creep Resistance of FeCrNi Alloys 1009
104 Stress Analysis and Structure Optimization of W-Shaped Radiant Tube in Continuous Annealing Furnace 1019
Part XXIII Effective Business Improvement Methodologies for the Minerals, Metals, and Materials Industries 1028
105 Case Studies of Continuous ImprovementProjects in the Metals Industry 1029
Part XXIV Environmentally Assisted Cracking: Theory and Practice 1037
106 Fracture Mechanics-Based Studyof Stress Corrosion Cracking of SS304Dry Storage Canister for Spent NuclearFuel 1038
107 Similar and Dissimilar Metal Weld Failures in Hydrocracking Service at a Refinery 1047
108 Influence of Tempering Treatmenton Precipitation Behavior,Microstructure, Dislocation Densityand Hydrogen-Induced Ductility Lossin High-Vanadium Hot-Rolled X80Pipeline Steel 1058
Part XXV Fatigue in Materials: Multi-Scale and Multi-Environment Characterizations and Computational Modeling 1070
109 Initiation and Early Growth of FatigueCracks 1071
Part XXVI Freeze Linings: Myth and Reality 1082
110 Influence of CaO/SiO?/Al?O? Ratio on the Melting Behaviour of SynCon Slags 1083
111 Freeze Lining Refractoriesin Non-ferrous TSL Smelting Systems 1093
112 Freeze-Lining Formation in SubmergedArc Furnaces Producing FerrochromeAlloy in South Africa 1104
113 Designing Furnace Lining/CoolingSystems to Operate with a CompetentFreeze Lining 1124
Part XXVII General Poster Session 1139
114 Corrosion Resistance of Hot DippingAl–Zn–Si and Zn–Al–Mg–Si AlloyCoating 1140
115 Performance of Low-Cost 3D PrintedPylon in Lower Limb Prosthetic Device 1148
116 Sequential Leaching Characteristicsof Chromium in AOD Slag-BasedCementitious Materials 1157
117 Study on the Reaction Behaviorof Hydrochloric-Acid-ContainingTitanium Blast Furnace Slag 1166
118 Thermodynamic and Kinetic Analysisof Inhomogeneous Distribution of Soluteon Precipitations in as Cast Nb–V–TiMicroalloyed Steel 1175
Part XXVIII Heterogeneous and Gradient Materials (HGM III): Tailoring Mechanical Incompatibility for Superior Properties 1186
119 Radiation and Corrosion Resistancesof 316LN Austenitic Stainless Steelby Rotationally Accelerated Shot Peening 1187
Part XXIX High Entropy Alloys VII 1197
120 A Novel Dual-Phase Gradient Materialof High-Entropy Alloy Preparedby Spark Plasma Sintering 1198
121 Molecular Dynamics Simulations on the Mechanical Behavior of AlCoCrCu?.?FeNi High-Entropy Alloy Nanopillars 1206
122 Production of AlCoCrFeNiME-BasedHigh-Entropy Alloysvia Self-Propagating High-TemperatureSynthesis 1216
Part XXX ICME Education in Materials Science and Mechanical Engineering 1223
123 ICME Applied in the UndergraduateCapstone Senior Design Sequence 1224
Part XXXI Interfaces in Structural Materials: An MPMD Symposium in Honor of Stephen M. Foiles 1235
124 Effect of a Vertical Twin Boundaryon the Mechanical Propertyof Bicrystalline Copper Micropillars 1236
Part XXXII Materials for Molten Salt Energy Systems 1242
125 Effect of Ni on the Corrosion Behaviorof Haynes 230 Alloy in MgCl2-KCl Salt 1243
Part XXXIII Mechanical Behavior of Nuclear Reactor Components 1252
126 The Study of Mechanical Behaviourof Materials for the Nuclear ReactorComponents in SUSEN Hot Cells 1253
127 Investigation of Radiation Temperatureand Straining Temperature Effectson the Screw Dislocation MobilityEvolution in Irradiated Ferritic GrainsUsing 3D Dislocation Dynamics 1262
Part XXXIV Mechanical Behavior Related to Interface Physics III 1272
128 Mechanical Properties of AmorphousSilicon Nanoparticles 1273
Part XXXV Modeling and Simulation of Composite Materials 1281
129 Molecular Dynamics Simulation of the Structure and Transport Properties of xKF–yNaF–zAlF? 1282
Part XXXVI Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials XVIII 1295
130 Microstructure Evolution and PhysicsProperties of Low Silver Copper AlloyWires During In Situ CompositePreparation 1296
Part XXXVII Phase Transformations and Microstructural Evolution 1304
131 Heat Treatment Strategies to Improvethe Quasi-Static and DynamicPerformance of Alpha + Beta TitaniumAlloys 1305
132 Effect of Silicon Contenton the Dilatometric Behaviorof a Medium-Carbon Steel 1310
133 Phase-Field Simulation of IntermetallicPhase Precipitation in a High-Al AlloyedLightweight High-Strength Steel 1322
134 Shape Memory Behavior of Ni??.?Ti??.? Processing-Induced Strain Glass Alloys 1331
135 Precipitation Hardeningof Supersaturated Al–Sc–Zr Producedvia Melt-Spinning 1341
136 Effect of Sm Content and SolidificationRate on Microstructure of SmFe Alloy 1347
137 Evolution of Dendritic MorphologyUnder HPMO Treatment 1357
138 In Situ Observation of Melting and ???Phase Transformation in DuplexStainless Steel 1366
139 Microstructural Evolutionof a Transformation in Which There Isan Exclusion Zone Around Each Nucleus 1377
140 Thermodynamic Properties of Si–BAlloys Determined by Solid-StateHeterogeneous Phase Equilibrium 1388
Part XXXVIII Powder Processing of Bulk Nanostructured Materials 1397
141 Microstructure Evolution and Mechanical Properties of Medical Material Mg–3Zn Alloy Prepared by Semi-solid Powder Injection Moulding 1398
142 Inhomogeneity of Strain in MetalParticulates Producedby Modulation-Assisted Machining 1413
143 Numerical Simulation and Validationof Gas and Molten Metal Flowsin Close-Coupled Gas Atomization 1421
144 Density Separation of Mixed Carbide Colloids via Standing Wave Physics 1434
145 The Influence of Mechanical Activation on the Synthesis of Ca?MgSi? O? 1445
Part XXXIX Recent Advances in Functional Materials and 2D/3D Processing for Sensors and Electronic Applications 1454
146 3D Printing of Polymer-BasedGasochromic, Thermochromicand Piezochromic Sensors 1455
147 3D Printing of Pharmaceuticalsand Transdermal DrugDelivery––An Overview 1472
148 Formulation of Curable Resins Utilizedin Stereolithography 1483
149 MARS––Magnetic Augmented RotationSystem 1496
Part XL Recent Developments in Biological,Structural and Functional Thin Filmsand Coatings 1508
150 Friction Conditions on Deep-Drawing Tool Radii When Using Volatile Media as Lubrication Substitute 1509
151 Investigation of Friction and AdhesionBehavior of Textured Workpiecesand Coated Tools Under Dry TribologicalContact 1520
152 Effects of Emissivity on CombustionBehavior of Energetic Materials 1534
153 Self-healing in Materials: An Overview 1547
Part XLI Solidification Processing of Light Metalsand Alloys: An MPMD Symposiumin Honor of David StJohn 1566
154 Revealing the Heterogeneous Nucleationand Growth Behaviour of Grainsin Inoculated Aluminium Alloys DuringSolidification 1567
155 Influence of Microstructure EvolutionDuring Twin-Roll Castingon the Properties of Magnesium Sheets 1578
156 A History of the Global Light MetalsAlliance 1588
157 Analysis of the High-Purity AluminumPurification Process Using Zone-RefiningTechnique 1598
Author Index 1608
Subject Index 1615
| Erscheint lt. Verlag | 26.2.2019 |
|---|---|
| Reihe/Serie | The Minerals, Metals & Materials Series | The Minerals, Metals & Materials Series |
| Zusatzinfo | XXII, 1731 p. 931 illus. |
| Verlagsort | Cham |
| Sprache | englisch |
| Themenwelt | Technik ► Maschinenbau |
| Schlagworte | conference proceedings • Engineering • Materials Science • metals • minerals • Research |
| ISBN-10 | 3-030-05861-1 / 3030058611 |
| ISBN-13 | 978-3-030-05861-6 / 9783030058616 |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
PDF (Wasserzeichen)DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasserzeichen und ist damit für Sie personalisiert. Bei einer missbräuchlichen Weitergabe des eBooks an Dritte ist eine Rückverfolgung an die Quelle möglich.
Dateiformat: PDF (Portable Document Format)
Mit einem festen Seitenlayout eignet sich die PDF besonders für Fachbücher mit Spalten, Tabellen und Abbildungen. Eine PDF kann auf fast allen Geräten angezeigt werden, ist aber für kleine Displays (Smartphone, eReader) nur eingeschränkt geeignet.
Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.
Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.
aus dem Bereich
