Geopolymer and Green Technology
Trans Tech Publications Ltd (Verlag)
978-3-03835-641-7 (ISBN)
Collection of selected, peer reviewed papers from the special topic volume with invited peer reviewed papers only.
The 23 papers are grouped as follows:
Chapter 1: Using of Geopolymers and Pozzolanic Materials
Chapter 2: Polymers and Composites
Chapter 3: Green Technologies in Chemical Engineering
Preface
Chapter 1: Using of Geopolymers and Pozzolanic Materials
An Application of Rice Husk Ash (RHA) and Calcium Carbonate (CaCo3) as Materal for Self-Healing Cement
Treated Oil Palm Ash as Precursor in the Zeolite Synthesis
Strength, Density and Water Absoprtion of Palm Oil Boiler Ash (POBA) Geopolymer Brick/IBS Brick
Performances of Artificial Lightweight Geopolymer Aggregate (ALGA) in OPC Concrete
Effect of Silica Fume and Glass Powder on High-Strength Paste
Adhesiveness of Kaolin Based Coating Material on Lumber Wood
Effect of Mixing Technique on Epoxy Resin Nanocomposites Filled Fly Ash Based Geopolymer to Compressive Properties
Flexural and Crack Analysis of Oil Palm Clinker in Lightweight Reinforced Cocrete Beams
Experimental Test and Non-Linear Finite Element Modeling Prediction on Profiled Steel Sheeting Dry Board (PSSDB) with Geopolymer Concrete Infill
Effect of PVA Fiber in Increasing Mechanical Strength on Paste Containing Glass Powder
The Usage of Glass Waste as Cement Replacement
Chapter 2: Polymers and Composites
Optimization of Holding Time on Microwave Irradiation of the Composite Iron-Chromium Reinforced with Alumina Particle
Mechanical and Microstructure Characterization of Aluminium-Copper (Al-Cu) Reinforced with In Situ Titanium Diboride (TiB2)
Thermal and Mechanical Characterizations of Nanoclay/Palm Oil Polyol Based Polyurethane Composites
The Effects on Cure Characteristics, Physico-Mechanical Properties and Morphology of Bamboo Activated Carbon Filled Styrene Butadiene Rubber (SBR) Vulcanizates
Collapsed Mode and Specific Energy Absorption of Glass Filled Polypropylene (GPE) and Glass Filled Polyethylene (GPP) Composite Pipes under Quasi-Static Axial Loading
Properties of Natural Rubber/Styrene Butadiene Rubber/Recycled Nitrile Glove (NR/SBR/rNBRg) Blends: The Effects of Recycled Nitrile Glove (rNBRg) Particle Sizes
Synthesis of 60 (wt.)%SiO2-40 (wt.)%CaO Sol-Gel Derived Glass-Ceramic and In Vitro Bioactivity Assessment in SBF Solution
Characterization of Linear Low Density Polyethylene/Rambutan Peels Flour Blends: Effect of Loading Content
Chapter 3: Green Technologies in Chemical Engineering
Precipitated Silica Derived from Palm Oil Mill Fly Ash: Kinetics and Characterization
Screening of Total Phenolic Content of Antioxidant Thin Film from Pomelo (Citrus grandis) Peel
Pyrolysis of Rice Straw by Using Microwave Irradiation with Quartz Glass Reactor
The Utilization of Coconut Fibre into Fired Clay Brick
| Erscheinungsdatum | 03.03.2016 |
|---|---|
| Reihe/Serie | Key Engineering Materials |
| Zusatzinfo | Illustrations |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 570 g |
| Themenwelt | Technik ► Elektrotechnik / Energietechnik |
| Technik ► Maschinenbau | |
| Technik ► Umwelttechnik / Biotechnologie | |
| ISBN-10 | 3-03835-641-7 / 3038356417 |
| ISBN-13 | 978-3-03835-641-7 / 9783038356417 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
