Engineering and Technological Solutions for Sustainable Development
Trans Tech Publications Ltd (Verlag)
978-3-03835-331-7 (ISBN)
Collection of selected, peer reviewed papers from the 2014 International Conference on Green Transport, Renewable Energy and Environment (ICGTREE 2014), August 23-24, 2014, Tianjin, China.
The 108 papers are grouped as follows:
Chapter 1: Sustainable Development of Transport and Transport Infrastructure,
Chapter 2: Renewable Energy, Clean Energy Technologies and Fuel Cell,
Chapter 3: Thermal Engineering, Kinetics, Heat Pump and Energy-Saving Technologies,
Chapter 4: Mechanical and Fluid Engineering,
Chapter 5: Mining, Oil, Gas and Petrochemical Engineering,
Chapter 6: Environmental Engineering and Wastewater Treatment Technologies,
Chapter 7: Environmental Pollution Control Technologies,
Chapter 8: Demand and Consumption of Energy and Resources in Context of Sustainable Development,
Chapter 9: Agricultural Technologies in the Context of Sustainable Development
Preface, Organizers and Committees
Chapter 1: Sustainable Development of Transport and Transport Infrastructure
Evaluation of the Effect of Fuel Properties on the Fuel Spray and Jet Characteristics in a HGV DI Diesel Engine Operated by Used Cooking Oils
Influence of Passenger Load on Diesel Bus Emissions
Modeling Traffic Demand of Tourist Areas Based on a Joint Prediction Model
Comprehensive Evaluation of Advanced Public Transportation System Based on the Matter Element and Combination Weight
Database Design of Roadside Parking Toll Collection System
Estimation on LTO Cycle Emissions from Aircrafts at Civil Airports
Investigation of Cold Start Engine Performance at Low Temperature Fuelled with Alternative Fuel
Investigation on Reaction Flow Field of Low Emission TAPS Combustors
Modeling and Simulation of Two-Stage Expansion Air-Powered Engine
Simulation of HCCI Combustion Characteristics for Low RON Gasoline Surrogate Fuels
Research on Vessel Trajectory Multi-Dimensional Compression Algorithm Based on Douglas-Peucker Theory
Study on the Low Carbonization of Highway Electromechanical System
The SOC Estimation for Power Battery Using KF Method which Parameters are Updated by Least Square Method
The Application of Fluid Analogy Method for Estimating Transit Route ODs Using IC Card On-Off Passenger Data
The Analysis of Urban Road Traffic State Based on Kinds Floating Car Data
Synthesis and Property of a Green Melting-Snow Additive for Asphalt Pavement
Slotting Optimization Model and Algorithm for Concerning the Correlation in Hybrid Travel Policy
Restoration Strategies of Urban Road Network after Earthquake Based on Corrected Component Probabilistic Importance
Research on the Traffic Safety on the Section of Expressway with Crosswind in Mountainous Area
Numerical Study on the Running Safety of High-Speed Train under the Cross Wind
Bus Safety Regulatory System Design Based on Internet of Vehicles Technology
Road Performance of Warm-Mix Modified Bitumen Mixture with EC120
Effect of Warm Mix Addictive EC120 on Asphalt Performance
Chapter 2: Renewable Energy, Clean Energy Technologies and Fuel Cell
XPS Analysis Pyrolytic Char of Cellulose with Different Crystallinity Based on Ionic Liquid Regeneration
Experimental Study on Biomass Char Combustion in O2/CO2 Atmosphere
An Analysis on the Model of Wind Power Generation Cost per Kilowatt-Hour in China
Optimal Construction Program of Wind Power Farm on the Beach
The Wind Power Forecast Model Based on Improved EMD and SVM
Experimental Study on Parabolic Trough Solar Heating System
Power Flow Calculation for Distribution System Including PV Type Distributed Generation
Research on the Impact of Shadow on the Performance of Building Photovoltaic System
Simulation Design and Benefit Analysis of Grid-Connected Photovoltaic System
Research of Current-Sharing Control Strategy of Parallel PEMFC DC Power Supply System
Chapter 3: Thermal Engineering, Kinetics, Heat Pump and Energy-Saving Technologies
Influence of Jet Angle on Diffusion Flames in Centrifugal Field
Numerical Study on Supersonic Combustor with an Allotype Cavity
Control of Ice Crystal Growth by Different Surfactants in Ice Slurries
Numerical Simulation Research on the Internal Flow of a Heat Exchanger
The Effects of Arrangement of Longitudinal Vortex Generators on the Flow and Heat Transfer in the Rectangular Channel
Energy-Saving Analysis and Heat Transfer Performance of Wastewater Source Heat Pump
Experimental Study on Effect of CO2 Heat Pump Evaporator on Frosting Condition
Heat Imbalance Analysis of a Hybrid Ground-Source Heat Pump System
Study on the Feasibility and Environmental Benefits of South Hot Spring Wastewater Source Heat Pump Technology
Analysis for Cascade Recycling of LNG Cold Energy
Experimental Analysis of the Coefficient of Building Comprehensive Property
Experimental Research on Energy-Saving Application of Permanent Magnet Speed Regulation Technology
Hydraulic Condition Analysis of Different Position Heat Exchange Stations in Heat Supply Network
Laboratory Research on Vitrified Microsphere Insulation Mortar
Numerical Simulation of Indoor Thermal Environment of a Double-Skin Facade Office with Different Shutter Angles
Numerical Simulation Research on the Heating Process of Air by Waste Heat
Risk Assessment and Control Measures of Air Conditioning System in Large Commercial Building
The Experimental Analysis on the Regularity of Heating Load in Buildings Using Heat Meters with On-Off Time and Area Method in Shijiazhuang Area
Chapter 4: Mechanical and Fluid Engineering
Static Finite Element Analysis on Cast Shell of a 100 kW Single Screw Expander
The Inverse Kinematics and Simulation of a Novel 3-DOF Parallel Mechanism
Effect of Velocity Profile on the Stability of Liquid Sheet
Experimental Study and Mechanism Analysis of Effervescent Atomization
Study on Flow of Ionic Liquids under Electromagnetic Drive
Chapter 5: Mining, Oil, Gas and Petrochemical Engineering
Enhancing the Safety of Coal Mining by Injecting CO2 into Coalbeds
Geophysical Model of Coal Prospecting in Uplift Area
Study on the New Combined Technology of Tungsten Dressing and Metallurgy and its Economic Feasibility Analysis
The Fushun Oil Shale Semi-Coke’s Combustion Features and Thermal Dynamic Analysis
Study on Silicon Scale-Forming in ASP Flooding System
Organic Solvent Extraction and Modified Aluminum Retort Experiments of an Indonesian Oil Sand
Injection Method of SJT-B Collosol in the Low Permeability Reservoir
The Detailed Calculation Model of the Friction between Sucker Rod and the Liquid in the Sucker Rod Pump Lifting System of Heavy Oil
The Research and Application of Segregated Completion Technology in Horizontal Wells in the Heavy Oil Reservoirs
The Screening of Oil Resistant Foaming Agents and Oil Displacement Effect Evaluation of Foam Flooding
Numerical Simulation Study on Feasibility of Coal-Bed Methane Reservoir Commingling in Qinduan Block
Chapter 6: Environmental Engineering and Wastewater Treatment Technologies
Garlic Peel as Adsorbent for the Removal of Methylene Blue from Aqueous Solution
Influence of Flow Field on Simultaneous Removal of Nitrogen and Carbon by Membrane Aerated Biofilm Reactor
Removal of Chloroform in Water by Three-Phase Materials: Fe0/TiO2-EP/ AC
Removal of Mn(II) from Aqueous Solution Using Saponified Garlic Peel
Study about Numerical Simulation of Subsurface Flow Constructed Wetlands Based on Hydrus-CWM1
Study on Preparation and Properties of Microbial Flocculant/Sepiolite Fibers Water Treatment Materials
An Engineering Practice of Industrial Wastewater Treatment with Fe/Cu Bimetallic Process
Efficiency Optimization of Organic Pollutant Removal in Pharmaceutical Wastewater by Microwave-Assisted Fenton-Like Technology
Study of Dynamic Adsorption of Trace Kr and Xe by the 129Xe and 84Kr Tracing Method
Studies on the Environmental Impact of the HVAC Equipments Based on the LCA Theory
Study on the Safety Precautionary Measures of Welding in Ship Repairing and Building
Green Consumption: An Environmental Friendly and Healthy Approach for Chinese Consumers
Establishment and Application Research of Evaluation System for Low-Carbon Industrial Park - Case Study on Caofeidian Industrial Park in Hebei Province of China
The Research of Landslide Monitoring Data Integration Framework Based on Three-Dimensional WebGIS
Study on Photoelectric Catalysis Reduction of CO2 on a WO3 Modified Cu2O Composite Electrode
Research on Formability of Size Foaming in Biomass Buffer Composites
Enhanced Soil Washing of PCB by Sophorolipids from Transformer Oil Contaminated Soil
Characteristics and Origin of Loess Landslides on Loess Terraces at Heifangtai, Gansu Province, China
Poly(vinylidene fluoride) (PVDF) Membrane Preparation with an Ionic Liquid via Thermally Induced Phase Separation Melt Technology
Chapter 7: Environmental Pollution Control Technologies
Numerical Simulation on South American Coal Reburning in a Pulverized Coal Combustor
A Study on Flame Structures in CH4 Counterflow Partially Premixed Flame
Experimental Research on Catalysts of V2O5/AC and V2O5/CNTs for Low Temperature SCR Denitrification
Comparison of De-NOX Performance of Mn/AC and Mn/Bio-Char on Low-Temperature SCR
Effects of Biomass and Crude Oil Co-Combustion on NO and SO2 Emissions
Combustion Experimental Study of Reed Black Liquor (RBL) Droplets and Particles in Fluidized Bed
Thermodynamic Investigation on SO3 Distribution in Oxy-Fuel Combustion
Studies on Scroll Compressor Noise Improvement
A Study on Estimating Gasoline Engine Radiated Noise Based on Surface Vibration Measurement
Simulation Research about Impacts of Flue Gas on Surrounding Buildings
Chapter 8: Demand and Consumption of Energy and Resources in Context of Sustainable Development
An Analysis of the Factors Influencing Energy Demand in China Based on Cointegration Theory
Analysis of Energy Consumption Carbon Emissions in Hunan Province Based on Industrial Structure
Analysis of Water Sustainable Utilization in Changsha City Based on Water Footprint Theory
Energy Analysis and Sunshade Strategy Research of Passive Public Buildings
Study of the Relationship among Economic Growth, Export and Energy Consumption in China
Chapter 9: Agricultural Technologies in the Context of Sustainable Development
Multi-Criteria Optimization in Forest Exploitation
Study on Nutrient Characteristics Analysis of Back Soil Area
Calculation and Analysis of Contribution Rate from Technology Advancement about Flue-Cured Tobacco Production in Guizhou Province
Diversity Status and Conservation Countermeasures of Medicinal Fungus Resource in China
Nutrient Limiting Factors in Red-Yellow Soil from Different Parent Rocks at Oil-Tea Forest Land in the South-Central Region of China
Orthogonal Analysis Methodology for the Extraction of Polysaccharides from the Root of Rhodiola sachalinensis A. BOR and Evaluation its Hypoglycemic Effects
The Nutrients Spatial Variability of Black Soil Based on GIS
| Erscheint lt. Verlag | 22.12.2014 |
|---|---|
| Reihe/Serie | Applied Mechanics and Materials |
| Zusatzinfo | Illustrations, unspecified |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 1200 g |
| Themenwelt | Technik ► Elektrotechnik / Energietechnik |
| Technik ► Umwelttechnik / Biotechnologie | |
| ISBN-10 | 3-03835-331-0 / 3038353310 |
| ISBN-13 | 978-3-03835-331-7 / 9783038353317 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
