Material Science, Civil Engineering and Architecture Science, Mechanical Engineering and Manufacturing Technology II
Trans Tech Publications Ltd (Verlag)
978-3-03835-267-9 (ISBN)
Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Advanced Engineering Materials and Architecture Science (ICAEMAS 2014), July 26-27, 2014, Huhhot, Inner Mongolia, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 543 papers are grouped as follows:
Chapter 1: Advanced Material Science and Technologies,
Chapter 2: Bio and Medical Materials and Technologies,
Chapter 3: Detection, Measurement and Monitoring,
Chapter 4: Applied Mechanic, Mechanical Engineering, Automation and Control,
Chapter 5: Power Systems, Electrical and Electronic Engineering,
Chapter 6: Civil Engineering, Architecture and Construction Science,
Chapter 7: Environmental Science and Technologies,
Chapter 8: Organization and Management of Production, Economics and Finances,
Chapter 9: Theory and Practice of Information Technologies and Communications,
Chapter 10: Applied Mathematics, Data and Signal Processing, Computational Procedures,
Chapter 11: Modern Technologies in Education.
Preface
Chapter 1: Advanced Material Science and Technologies
Application Performance of Super Ferrite Stainless Steel on Condenser in Power Plant
Crack Damage and Facture Analysis of Airship Envelope Material
Current Induced Interfacial Microstructure and Strength Weakening of SAC/FeNi-Cu Connection
Effect of Hardness on Polishing Performance of Plastic Mold Steels in Prehardened Condition
Effects of Fe and P Additions on Microstructures and Properties of Cu-Cr-Zr Resistance Spot Welding Electrode Alloy
Failure Analysis of GCr15 Steel Balls in Ball Screw Pair
Failure Analysis on the GCr15 Bearing Steel and the 20CrMo Carburized Steel Nuts of the Ball Screw Pair
FEM Study and Characterization on Laser Shock Peening of TC4 Titanium Alloy Structure
Flow Behavior and Constitutive Equation of Fe-Cr-Ni Preform Reinforced Al-Si-Cu-Ni-Mg Aluminum Composite
Grain Structure Development of C2Cl6-Refined Magnesium Alloy AM60
Influence Factors of Desulfurization Efficiency in Wet Flue Gas Desulfurization System
Laser-Arc Hybrid Welding Properties of Aluminum Alloy 6005A
Numerical Analysis of the Influence on High Humidity in a T-Joint Fillet Weld for High Strength Low Alloy Steel
Performances of Proton Exchange Membranes from Sulfonated Polyetheretherketone and Inorganic Compound Blends
Protection of Kapton from Atomic-Oxygen Erosion Using a Polysilazane Coating
Research on Cutting Deformation Mechanism of Hardened Steel
Research on Depth Evaluation of Surface Crack in Laser Cladding Coating with Metal Magnetic Memory Technology
Research on Friction Wear Characters and Microcosmic Mechanism of Galvanized Sheets
Resistive Gas Sensors Based on MWCNTs-PVP Composite Films
Selective Esterification of Ethylene Glycol Ethyl Ether over Silica-Cerous
Steam Reforming of Ethanol by a Nickel Nanowire Catalyst
Study on the Calculation of Boron Combustion in Different Oxidizing Atmospheres
Study of Application of Thermal Infrared Camouflage Materials in the National Defense Engineering
Synthesis of 4-(2-(Piperazin-1-Yl)-7,8-Dihydro-5H-Thiopyrano[4,3-d]Pyrimidin-4-yl)Morpholine and 4-Morpholino-2-(Piperazin-1-Yl)- 7,8-Dihydro-5H-Thiopyrano[4,3-d]Pyrimidine 6,6-Dioxide
Synthesis of Boride Composite Powder via Fused and Carbon Thermal Reduction
Synthesis of Nd:GGG Powder by Liquid Phase Co-Precipitation or Solid State Method and Preparation of its Transparent Ceramic
Temperature-Responsive Chromatographic System Using N-Isopropylacrylamide Polymer-Modified Columns
The Effect of Different Tungsten-Containing Materials Addition on the Reinforcements in the Surface Compound Layer with Steel Substrate
The Forming Analysis of Inner Straight Groove Copper Pipe under Different Spinning Speed
The Study and Application of Electromagnetic Wave Absorption Materials Research
The Introduction of the Chemical Composition in IF Steel Control
The Synthesis, Wearing Properties of Titanium Carbide Particle Beams Reinforces the Cast Iron Matrix Overall Composite Materials by In Situ
Ultrasmooth Polishing with Sub-Angstrom Roughness on Fused Silica Surface
Ultrasonic-Assisted Dissolution of Polystyrene in Decahydronaphthalene for the Preparation of Poly(Cyclohexylethylene)
Uniform Hematite Hexagonal Nanodisks with Dominant (001) Facets: Hydrothermal Synthesis and Catalytic Performance for the Decomposition of Ammonium Perchlorate
Influence of Additives to Cement Slurry Rheological Property
Research on Mechanical Properties of Cement Mortar with Iron Tailings
The Influence of Redispersible Powder on Mechanical Properties of EPS Light-Aggregate Concrete
Research on the UV-Curing Injection Molding
The Introduction of the LF Refining Function and Process
Chapter 2: Bio and Medical Materials and Technologies
A Novel Deproteinized Bovine Bone Scaffold Containing Chitosan Microspheres for Controlled Delivery of BMP-2
A PVP-Based Quartz Crystal Microbalance Sensor for H2S Detection
Analysis of the Factors in Affecting the Performance of Coal Liquefaction
Analysis of Trichome Density and the Content of Glandular Secretion on Different Flue-Cured Tobacco Leaves
Apple Snails Polysaccharide Extraction and Pharmacological Potential Study In Vitro
Application of Modified Chitosan in Fruit Juice Clarification
Biodegradation of Direct Red 28 and Direct Yellow 12 by a Novel Bacterial Consortium
Correlation between Anthocyanins, Total Phenolics Content and Antioxidant Activity of Purple Corn (Zea mays L.)
Effect of Endoplasmic Reticulum Stress on Resveratrol-Induced Cardioprotection
Effects of Phosphate Fertilizers on Bioavailable Lead in Tea Garden Soil and Lead Absorption and Accumulation by Tea Plants
Experimental Investigation of Dynamic Viscoelasticity of Bamboo with Different Ages
Formation and Evolution of Icosahedron during Relaxation of Amorphous Ca7Mg3 Alloy
In Situ Pollen Germination and Artificial Pollination Compatibility in Cassava (Manihot esculenta Crantz)
Microstructure Evolution Characteristics during Rapid Solidification of Ca-Mg Alloys with Different Mg Contents
Molecular Beacon-Based Fluorescent Biosensor for Sensitive Detection of Single Nucleotide Polymorphism
Nutrient Cycling and Balance of P for Wheat Production in China
Optimization Research on Buckwheat Vinegar Fermentation Process
Preparation of Clove Essential Oil Microencapsule and Study on its Performance
Prophylactic Effect of Dragon-Pearl Tea on HCl/Ethanol Induced Gastric Injury in ICR Mice
Quantitative Trait Locus Analysis for Yield Traits of Cassava (Manihotesculenta Crantz)
Reduction of Pesticide Residues on Fresh Vegetables with Chemical Germicidal Water Treatment
Reusable Electrochemical Biosensor for Sensitive Detection of Single Nucleotide Polymorphisms Based on Gold Nanoparticle Self-Assembly
Study on Hydrolysis of Yeast-Wall with Lytic Enzyme for Extraction of Astaxanthin from Phaffia rhodozyma
Testing of Fiber Contents in Mixture Textiles by NIR Combined with BP Neural Network
The Antioxidant Effects of Germinating Tartary Buckwheat Vinegar
The Preparation and In Vitro Release Study of the Novel Changchun Amine Sustained-Release Capsules
Theoretical Simulation and Feasibility Analysis of the Estimation of Crop Leaf Chlorophyll Using Narrow Band NDVI
Discrete Analysis of Maize Ear at Different Impact Head
Entomopathogenic Nematodes Isolated from Gansu Province and Four New Species in China
Evaluating Goodness-of-Fit in Comparison of Different Expressions for Length-Weight Relationship in Fishery Resources
Study on High Voltage Electrostatic Field Thawing Technology of Fish
Using the Seldinger Technique Cerebral Angiography (DSA) Line of Intravascular Interventional Treatment for Patients with Care
Studies on the Bacteriostasis of Nano-Silver on the Pathogenic Fungus Botrytis cinerea from Illed Plants
Application of Three-Dimensional Fluorescence Spectroscopy Coupled with ATLD in Rapid Determination of Triazophos Content in Duck Meat
Diagnosis of Ovarian Fibroma by Ultrasonography
Dynamic Assessment of Hip Fracture under Different Impact Configurations: An Explicit Dynamic Analysis Approach
Application of Computer Digital Technology in Orthopedic Treatment
Chapter 3: Detection, Measurement and Monitoring
A Fault Detection Model for Large-Scale Circuit Communication Systems
Advanced Sequence-Based Localization Algorithm in Wireless Sensor Networks
An Antenna with High Gain Applied in Grain Moisture’s Measurement
An Improved WLAN Positioning Algorithm Based on RSS Variation over Physical Space
Application of BP Neural Network in PSD Nonlinear Correction
Changing Dimensional Feedback Correction Method of INS/GPS Integrated Navigation System Based on Lever Arm Estimation
Coherent Video Simulation of PD Seeker Combat with Towed Decoy Interference under Triangular Situation
DDC Design for Multi-Frequency Receiver Based on RF Sampling
Design and Development of a Drifting Buoy for Gathering Environmental Data
Design and Implementation of the Power Watch Circuit of Groundwater Monitoring System
Establishment of Mathematical Model in Evaluation of Uncertainty in Indication Error Measurement Results
Fault Signal Detection Model for Large-Scale Circuit Communication System
HIRFL Environment Temperature and Humidity Monitoring System Research and Design
Key Technology Research of Target Association Based on Electronic Sensor and Optical Sensor
LDPC Coded PPM and Iterative Detection for Free-Space Optical Links
Location Technology of Correlation Peaks Based on Joint Transform Correlator
Measurement and Analysis on the Concentration of Dust of Various Diameters in a Foundry Workshop
Measuring the Elastic Modulus and Poisson's Ratio of Corncob by Electrical Method
Nanomechanical Measurement Methods on the Basis of MEMS
P-Box Theory and SVM Methods with Application in Pattern Recognition
Research and Design for Electromagnetic Leakage Detector Based on Induction Coil Method
Research of AdaBoost Face Detection and OpenCV Implementation
Research of Traffic Signal Control Strategy Based on the Fuzzy Control
Research on Dual Ground Loop Vehicle Detection System of Intelligent Transportation
Research on Geometric Layout of Pseudo-Satellite in the Small Airport
Research on Low-Voltage Arc Fault Detection Based on BP Neural Network
Research on Measurement for Branching Fraction of ψ(2S) → ωπ0
Sewage Detection System Design Based on Large-Scale Embedded Microcontroller
Simulator of the SAR Echo Based on FPGA
Study of Pose Detection Algorithm for Specific Object Based on Monocular Vision
Surface Crack Detection in Building Wall Based on Computer Vision
System Identification of a Class of Second-Order Continuous System
Target Recognition Technology Based on Wavelet Transform
The Calibration Method of Thermal Heat Flux Sensor Based on Wireless Sensor Networks
The Research of Sensor Application Status
The Research on Fuzzy Clustering Method Based on Differential Evolution Algorithm in Intrusion Detection
Vehicle Tracking Based on Fuzzy C-Means Clustering and Grey Model
Virtual Simulation of PCA Algorithm and Detection Technique of Capturing Fashion Show Movements
Volleyball Movement Trajectory Analysis Based on Three-Dimensional Visual Tracking
Analysis on the Setting of Modeling and Detecting Parameters of GEO Orbit Satellite Camera
Design of Automatic Aerial Air Pollution Monitoring System
Feature Extraction of Vibration Signal Based on an Improved Local Wave Analysis
Virtual Simulation Technology of Wireless Sensor Neural Network in Basketball Movement Distribution
Chapter 4: Applied Mechanic, Mechanical Engineering, Automation and Control
A Design of Innovative Experiment Platform Based on the Research of Flapping-Wing Aircraft
A Direct Torque Control Driven Vessel Actuator Device
A New Rate-Dependent Prandtl-Ishlinskii Model for Piezoelectric Actuators
A Novel Memristor Chaotic Circuit Based on CFOA
A Novel Vehicle Speed Control Based on Driver’s Vigilance Detection Using EEG and Sparse Representation
A Study on the Location System Based on Zigbee for Mobile Robot
Accuracy Measurement and Error Compensation of Three-Axis CNC Milling Machine
Adaptive Fault-Tolerant Congestion Control via Dynamic Output Feedback
An Overview of Worst-Case Execution Time Estimation for Embedded Programs
Analysis and Manufacturing of Conformal Cooling Channels in Injection Mold
Analysis and Simulation of Dynamic Characteristics of Helical Gears
Analysis of Carburetor Modal Based on ANSYS
Analysis of Tee Pipe Hydroforming Process Parameters
Analysis on Effect of Cooling Oil Temperature on Cutting Stability of Gear Shaping Machine
Application of ANFIS in Engine Fault Prediction
Application of MasterCAM in the Processing of Avoiding Valve Pits of Piston
Application of RBF Neural Network in the Manipulator Trajectory Planning
Characteristic Analysis of Three-Bladed Darrieus Wind Turbine Based on the Multiple Streamtube Model
Comparative Research on Attitude Algorithm of the Multi-Rotor UAV Based on the Gyroscope
Comparison of Curved Surface Part Finishing Simulation Based on CAXA
Correct Use and Maintenance of Nc Machine Tools
Current Status and Tendency of Development in Vehicle In-Arm Suspension
Design and Implementation of Humanized Temperature Control for Hotel Air-Conditioning
Design and Simulation of Car-Following Control System for Intelligent Vehicles
Design of Control System for Hydraulically Vibrated Processing Tomato Fruit Seedling Separation Device
Design of Distributed Control System of Liquid Fermentation Based on S7-300 PLC and WinCC
Design of Parts Processing and Control System Based on PLC
Design of Semiconductor Thermoelectric Generation Control System Based on MCU
Design, Modeling and Simulation for Obstacle Crossing Robot Based on In-Wheel Motor
Dynamic Characteristics Analysis of Simulator Six-DOF Platform
Electrical Erosion Failure Analysis of Speed Increasing Gearbox Gear
Evidential Study of Relationship between Flexible Drift of Fuel Nozzle Performance and Hot-End Failure of X Engine
Fault Diagnosis of Induction Motor Based on Multi-Sensor Data Fusion
Finite Element Analysis of Car's Sub-Frame
Finite Element Analysis of Engine Fixed Parts Assembling Process
Flow Resistance Coefficient Identification of Chilled Water System Based on Multi-Objective Optimization and Experiment Validation
Helicopter Reliability Researching Based on Neural Networks
High-Sideslip Model Reference Adaptive Flight Control for Aileron Locked Aircraft
Innovative Design for Function of Withdrawing from ATM Based on PFGA
Investigation on Mechanism of Ultra-Smoothed Surface with a Micro Slot on the Flank Face in Micro Cutting
Lubricant Retention Property of Micro Wire Electrical Discharge Machining Surface
Mechanical and Electrical Integration in the Application of the Excavator
Moving Object Tracking with Mobile Robot Using Camera and Laser
Multistage Self-Priming Pump Performance Simulation & Test Research
Nursing Robot Design Based on the Concept of Industrial Design
Observer-Based Dynamic Output Feedback Controllers Design with Packet Dropouts for Augmented Switched System
Parameterized Modeling of Involute Helical Gear by UG Based on Symmetric Equation
PLC Application in Carrying Manipulator
Reliability Analysis of the Home and Abroad CNC Equipment Used in Automobile Parts Industry
Research of Halbach Array’s Influence on Permanent Magnet Synchronous Motor’s Performance
Research of Modeling and Control Method for Electromagnetic Levitation System
Research on Kinematics Joint Type Mobile Robot Platform for Thin Coal Seam Inspection
Research on Reliability Analysis of Plane Power Supplying System Based Bayesian Fusion
Research on Single Neuron Adaptive PID Controller
Research on Technology and Application of Multi-Sensor Data Fusion for Indoor Service Robots
Research on the Calibration Method of Acceleration Sensor’s Data Filtering
Research on the Carrier Frequency Loss Characteristics of Induction Motor Fed with Variable Frequency Power
Research on the Control Method of Bending Mode of AFS System Based on Preview Control
Research on Wide Range and Assembled Slide Rheostat for Electrical Engineering Based on Auto Control
Signal-Digital Conversion of Stepper Motor Used in Ships
Simulation and Optimization of SCR System for Common-Rail Diesel Engine
Simulation on Dynamics of Transmission Shaft-Rear Driving Axle of Minibus with ADAMS
Study of Pilot Injection for the Improvement of Combustion and Emissions Characteristics in a Heavy-Duty Diesel Engine
Study on Dynamic Response of Joints Accuracy to the Slider Crank Mechanism of Internal Combustion Engine
Study on the Improvement of Color Image Enhancement Algorithm for Robot Vision System
Study on the Variable Weight Method for Gearbox Fuzzy State Evaluation
The Application of Cascade Control Based on DMC in Stripping Section Temperature Control System
The Design of Control System of Piston Pin Punching Recess Automatic Drilling Dedicated Machine Tool
The Design of the High Tension Line Mechanical Deicing Unit
The Design of Thyristor DC Speed Regulation System Based on Ziegler Nichols PID Control
The Economic Effect Evaluation Analysis of a Kind of Automatic Demolition Device for Shipboard Artillery Ammunition
The Integrated Display System in Aircraft Cockpit Based on FPGA
The Optimized Design of FIR Digital Filter Based on FPGA
The Reliability Analysis of Shipboard Artillery Ammunition Automatic Demolition System
The Simulation and Experiment Research on the Influence of Crankshaft Flexible Torsion to Diesel Instantaneous Speed
The Study of Hydraulic Valve Position Control Based on PLC Controller
The Turbocharger Products and Manufacturing Research
Three Dimensional Localization Technology for Mobile Device Based on WLAN
Underwater Radiated-Noise Simulation Control Model Based on Propeller Influencing
Virtual Design and Verification for 3-RRC Car Multi-Dimension Vibration-Absorption Device Based on ADAMS
The Study of Cavitation Erosion Protection Performance of Heavy-Duty Engine Coolants
An Effective Single Passive Location Method Based on Near Space Vehicle for Ground Fixed Emitter
Design of Energy-Saving Piezoelectric Actuator Drive for High Frequency Servo Valve
Simulation-Based Helicopter Mission Effectiveness Evaluation Method
The Application of GPC Algorithm on Network Predictive Control Based on Toeplitz Equation
Mathematic Analysis and Performance Simulation for Exhaust Muffler Based on Transmission Loss
The Simulation Research of Dynamic Flow Based on the Bypass Method
The Stability Analysis and Controllers Design with Packet Dropouts for Discrete-Time NCSs Based on Augmented Switched System
Mathematical Model and Finite Element Analysis of Acoustics Performance of Composite Exhaust Muffler
Research on Breaking Energy Mechanism of Tunnel Boring Machine Disc Cutter Rock with CSM Model
Seismic Analysis of Hoist Using ANSYS Workbench
The Design of Mine Hoist Speed Regulation System Based on Ziegler-Nichols PID Control
A New FTL-Based Flash Memory Management Scheme for Flash-Based Storage Systems
Properties of Unbonded Flexible Pipe under Axial Force
An Automated Forming System of Negative Plates
Deformation Behaviors of Tube in Hydroforming with Radical Crushing
Chapter 5: Power Systems, Electrical and Electronic Engineering
Design of 500W Safety Photovoltaic Off-Grid Inverter for Family
Analysis and Design of Coupling Module for Low-Voltage Power Line Communication
Analytical Study on the Effect of Coordinated Application of Distributed Grid Connection and SVG on Wind Farms to Increase Power Quality in Fuxin Rural Power Grid
Comparative Study and Analysis of the Capacity of TCR Type SVC and Chain SVG to Suppress Transient Voltage Drop
Distributed Renewable Energy Access to Micro-Grid System Random Multi-Objective Economic Dispatch
Reserve Capacity Optimization of Large Scale Wind Power Integration
Research on Dynamic Scheduling of Grid Monitoring Data Processing Tasks Based Storm
Research of Li-Ion Battery’s Equalizer Circuit Based on TL431
Research of Li-Ion Battery’s Upper Equalizer Circuit
Estimation of Lead-Acid Battery SOC Based on Kalman Filtering Algorithm
Design of Lead-Acid Battery Intelligent Charging System
Fault Diagnosis of Power Electronic Circuit Based on Hybrid Intelligent Method
Frequency Regulation of Power System Considering PEVs
Radar Circuit Fault Diagnosis Based on Improved Wavelet Neural Network
Research on Wind Power Compensation Ratio of Vanadium Flow Battery Based on Power Optimization
Simulation Realization of LV SVG Control Algorithm Based on EMTDC and C Language Mixed Programming
Study on Communication Technology in Power User Electric Energy Data Acquire System
Study on Li-Ion Battery Intelligent Management System Based on AGV
The Design of Indoor Infrared Alarm
The Micro Grid Energy Sorage System with the Combination of APF Device Research
The Principle and Application of AC Voltage Withstand Test for GIS without Power Cut
Wind Speed Forecasting Based on FNN in Wind Farm
Chapter 6: Civil Engineering, Architecture and Construction Science
Analysis on the Competitiveness Strength of Yunnan Province in Construction Industry Based on the Model of Improved TOPSIS
Based on the Experience of India how to Design Wisdom City in China
Condition Management of High-Speed Railway Infrastructure Based on Full Life Cycle
Countermeasures and Suggestions for Planning and Construction of New Rural Communities
Crack Propagation of Jointed Rock and Application
Discussion of the BIM Implementation Mode in Real Estate Development Companies
Evaluation Method of Intensive Use of Downtown Land
FEM Analysis of Cooperative Effects of Formwork Supporting System and Concrete Floor
Grey Relational Analysis of Fatigue Performance of Semi-Rigid Pavement Structure
Influence of Seepage on Embedded Depth for Anchored Pile Supporting
Influence of Surface Preparation on Bond Performance of Externally-Bonded FRP to Concrete Interfaces
Integrated Analysis of Emotional Factors in the Planning and Design of Architecture
Land Reclamation Division of the Area along the JingCheng Expressway
Mortar Thickness Calculation of Bonding Layer in Large-Scale Bridge Construction
Nonlinear Numerical Analysis of Precast Concrete Shear Wall
Non-Linear Numerical Simulation of Core Steel Reinforced Concrete Columns Based on ABAQUS Software
Numerical Simulation Analysis on Vertical Displacement of Step Excavation in Foundation Pit Project
Parcel-Level Land Use Decision-Making of Farmers is Influenced by Neighborhood, Kinship, and Socioeconomic Conditions
Plumbum Sink and Transfer Process in Jiaozhou Bay
Predicting Model of Ground Deformation Caused by Shield Constructing
Prestressed Concrete Building Coal Mine Stent Design
Reliability Analysis on Slag Concrete Brick Masonry Compressed Based on Monte-Carlo Method
Research of Spatial Distribution of Cr and Ni in a Typical Black Soil on the GIS
Research on the Urban Ecological Landscape Based on the Theory of Chinese Garden City
Research the Population System Based on Entropy-Fuzzy Comprehensive Evaluation in the Urbanization Process
RGB Fusion of Seismic Attributes and its Application on Small Structure Interpretation in Coalmine
Risk Analysis within Feasibility Studies: An Application to Cost-Benefit Analysis for the Construction of a New Road
Sedimentary Facies Feature and its Ore-Controlling Role of Middle Permain Liangshan Formation, Southeast District of Guizhou Province
Seismic Response Analysis on the Repaired HSC Structure after Fire
Study of the Propagation Rules of Stress Wave in Bedding Rock Slope
Study on Combined Design of the City of Shenyang Residential Merchandise Condominiums Space
Study on Dynamic Evolution, Evolution Characteristics and Evolution Reasons of Regional Difference of FDI on China Seaport Construction
Study on Optimal Intercity Railway Transfer Scheme
Study on the Influence of Linear of Fire on Steel Deck Arch Bridge
Study on the Transport Processes of Pb in Jiaozhou Bay
Synthetical Classification and Damage Pattern of Slope/Landslide in Western Hubei Province
Well-Log Evaluation of Vuggy Carbonate Reservoir in Middle East
Design and Analysis of Visual Illusion Application in Visual Communication
A Comparison of the Economic Feasibility of the Protecting Tent Method and SCSFM Method for Heat Curing of Cold-Weather Concrete
The Earthquake Damage Remote Sensing Automatic Recgnition Based on Texture of Roof Tiles
Design and Development of Intelligent Household System
A Study on Cases of Legal Punishment for Construction Accidents
Chapter 7: Environmental Science and Technologies
Comparing Different Kinds of Materials for Adsorption of Methylene Blue
Decomposition Analysis of COD and NH4-N Discharge Reduction of Livestock and Poultry Breeding Industry in China
Experimental Study on the Supercritical Water Co-Oxidation of Municiple Sludge with Methanol
German Textile Waste Recycling Industry Processing and its Implications in China
Low-Carbon Ship Technology Based on Ship Energy Efficiency Rules
Photocatalytic Degradation of Hydrofluorocarbon under Visible Light Irradiation
Preparation and Performance of Mesoporous Carbon-SnO2-Sb Composite Electrode
Salinity Effect on the Microbial Fuel Cell Performance
Study on Fiber-Reinforced Laminated Composite Textile Tearing Behavior and Strength Prediction
Study on Soil Evaporation of Flue-Cured Tobacco and its Main Driving Factors under Water and Nitrogen Coupling Condition
The Value of Influence of Vibrations of the Chemical Composition of Technogenic Waste on Properties of Pigments
Variation of Total Volatile Fatty Acids (VFAs) and its Components in Hydrolytic Acidification Treatment of Dyeing Wastewater
Water Consumption Characteristics and Water Use Efficiency of Flue-Cured Tobacco under Different Conditions of Irrigation
A New Technology of High Efficiency Filter Water Purification
A Project of Energy Saving Control on Air Separation Cooling Tower
Application of Principal Component Analysis for the Estimation of Source of Heavy Metal Contamination in Sugarcane Soil
Analysis of Carbon Emissions Trading Costs Influencing Factors in Power Industry
Aquatic Transfer Mechanism of Mercury in Jiaozhou Bay
Distribution and Source of Plumbum in Jiaozhou Bay Waters
Effects of Different Irrigation Amounts on Water Use of Precocious Walnuts
Environmental Suitability of the Cassava Mealybug Assessments Using Ecological Niche Modelling
Enhanced Phytoremediation on PAHs in Soils by Combined Plants Cultivation
Ground Source Heat Pump System Operation under Initial Ground Temperature Influence
Mercury and other Heavy Metal Pollution in Soil-Vegetation System around Compact Fluorescent Lamp Production Town in China
Methods for Identifying Life Cycle of Environmental Protection Industry
Performance Analysis and Evaluation of a PHEV Using Dynamic Programming
Research on Evaluation of the City Environmental Pollution Based on Support Vector Machine
Research on Guilin Haze and Response Countermeasures
Research on Low Carbon Transformation of Tourism Industry in China
Study of Plankton in Qiantang River in Summer and Evaluation of Water Quality
Study on Exploitation Potential Evaluation of Reserved Land Resources Suitable for Cultivation in Wuhua County of Guangdong Province
Study on Treatment of College Wastewater Based on Hydrolysis Acidification Bio-Contact Oxidation Process
The Ecological Characteristics of Phytoplankton in Caohai Lake in Guizhou Karst Area
The Variation of the Contents of Pb in Surface Waters in Jiaozhou Bay
Predicting Impacts of Climate Change on Chinese Hybrid Poplar Using Maxent Modeling
A Standardization Analysis Research Method of the Shipboard Artillery Ammunition Demolition Technology
Chapter 8: Organization and Management of Production, Economics and Finances
Accessibility Evaluation in Aircraft Cabin Based on Virtual Reality
Agricultural Information Remote Collection System Based on Zigbee Research
Analysis of Outdoor Clothing Development Factors in Northeast China
Analysis of the Virtual System of Sports Scene Based on Virtual Reality Technology
Analysis on Problems of Liaoning Tourism Industry Based on DIAMOND MODEL
Application Research of Industrial Design Based on ALIAS Reverse Engineering
Application Research on the Internet in the Management of Medical Equipment Maintenance
Based on the Experience of E-Government Affairs how to Design Electronic Port in China
Building a Hybrid Prediction Model to Evaluation of Financial Distress Corporate
Construction and Application of County-Level Database of Basic Rural Economic Information
Design and Implementation of Food Processing Quality Traceability System Based on CMM
Effectiveness Analysis on Regulation and Model of Monetary Policy
Enterprise Competitive Intelligence System Research Based on Data Mining Technology
Enterprise Operating Funds Management Research
Estimation of Risk-Return for Real Estate Investments by Applying Ellwood’s Model and Real Options Analysis: An Application to the Residential Real Estate Market of Naples
Evacuation Simulation to a Library Room of a University Based on Computer Software Building EXODUS
Generative Method for Query Recommendations of Search Engines with Respect to the Traditional Chinese Medicine Industry
How Far is the Employment Transformation of “the Second-Generation Migrant Workers”
Information Resources in the Application of the Auto Inspection and Maintenance
Intelligent and Real-Time Information System of Production Manufacturing Based on Internet of Things Technology
Management and Maintenance on CT, MRI, Gamma-Ray Radiotherapy Instrument
Model and Algorithm Based on Sum of Deviation Squares for Multi-Criteria Decision-Making
Oil Extraction Engineering Data Query System Based on WEBGIS under the B/S Model
Reform of the System of Local Administration
Reformation Ideas and Suggestions to the Cotton Standardized Production Management Model in Xinjiang Corps
Research and Application of CBR System Based on Frame
Research on Financial Support for Rural Economic Development in China
Research on Online Marketing Technique Based on Three Dimensional Fitting System
Research on Power System Communication Operation and Maintenance Outsourcing Model
Research on the Moderate Social Financing Scale Based on Requirement
Research on Tourism Service Intelligent Recommendation System Based on Apriori-MD Algorithm
Study on Agricultural Investment Value of Listed Companies Based on Logistic Regression Model
The Association Analysis of Technical Indicators of Shanghai Stock Market
The Design for Petroleum Engineering Cost Management System Based on B/S Architecture
The Employment Differentials of the Industry between Rural Migrant Workers and Urban Local Low Skilled Labors
The Impact of Credit Constraint on Agricultural Productivity - Evidence from Less Developed Province of Jiangxi in China
The Research on many Issues in Tax Sources Economy Management under the GIS Technology
The Trading Methodology Using Employing Gibbs Effect at the Market Opening Time
The Visualization Research of User Observation and Quantitative Information
Tourism Marketing Strategy Based on Network - Take Microblog for Example
Usage and Maintenance of Medical Apparatus and Instruments of Human Factors Research
Use Logistic Regression to Predict User’ Behaviors
Design of Performance Evaluation System of Fresh Agricultural Products Logistics Distribution
Price and Warranty Period Decision in Different Channel Structures for Durable Product
Risk Assessment of Large-Scale Public Utility Projects on Base of Entropy Law
Strategies for E-Commerce Development of Local Agricultural Products - A Case Study in Dabie Mountain
Study on the Influencing Factor of C2C E-Commerce Consumption Tendency Based on Online Shopping Platform
Research on Multi-Level Context-Aware Material Data Model within Manufacturing Enterprises
Analysis on Coupling Development Competitiveness of Tourism Industry and Modern Service Industry in Liaoning Province Based on DIAMOND MODEL
Model Construction for Foreign Tourist's Sense of Belonging to Local Residents
Chapter 9: Theory and Practice of Information Technologies and Communications
A Discovery Method of the Dirty Data Transmission Path Based on Complex Network
A Link Prediction Model Based on Similarity between Links
A Method for Command Business Services Selection Based on Execution Efficiency and Reliability Restraint
A Method of Software Maintainability Evaluation Based on Static Analysis
A Model of Illegal Access Detection System under Cloud Environment
A Network Hotpoint Discovery Method for Micro-Blog
A Neural Networks Pruning and Data Fusion Based Intrusion Detection Model
A Software Engineering Method Based on Bionic Components
A Study of Knowledge Management System Based on Data Resources of Medical Industry
An Efficient Intra-Cluster MAC Protocol in Underwater Acoustic Sensor Networks
An Event Bridge Framework for Modeling and Simulating Networked Hybrid Dynamic Behaviors
An Improved VIPS-Based Algorithm of Extracting Web Content
Complex Network Theory in the Application of Optimization Topology Network
Cooperative Space-Time Network Coding for Multi-Sources Distributed Cooperative Network
Design and Implementation of an Open Source Content Management System
Design and Implementation of Software Configuration Tool for Integrated Modular Avionics
Design the Function of Excluding Interference for On-Board Radio Management Module
Development of Satellite/3G+ Multi-Link Communication Terminal Based on Medical Rescue Information System
Dynamic Effect Simulation of Snow Falling Based on Particle System
Enhancing User Authentication and Encrypting Lob Data in OLE DB Provider for Database
Higher Vocational College "Computer Network Technology" Course Life Scene Design
Hospital Library Information Service under the Digital Environment
Implementation and Application of an Algorithm for System Menu Traversal in C#
Implementation of Monitoring and Management for Professional Mobile Application Adapting to Scenarios Switch
Massive Data Hybrid Encryption Algorithm Based on Cloud Computing
Network Routing Mechanism Simulation Research Based on VANETs
One-to-One Disjoint Path Covers on WK-Networks
Optimization of the Virtual Potential Field Based on Coverage-Enhancing Algorithm for Directional Sensor Networks
Real-Time Embedded Software Architecture Modeling and Reliability Evaluation Based on Time-Extended Petri Net
Research and Design of Enterprise-Class Network Data Center Based on Cloud Computing
Research and Implementation of Topic Crawler Based on Hadoop
Research of Android Platform Application Based on HTML5
Research on Data Packets Clustering Algorithm in the Wireless Multiple Hop Network
Research on HWSN Node Covering Algorithm
Research on Information Security Issues Facing the Era of Big Data
Research on Network Attack Training Simulation System Based on Attack Tree
Research on Optimal Deployment of HWSN Node Cost Based on Simulated Annealing Algorithm
Research on Optimal Strategy of HWSN Coverage Based on Force-Directed Differential Evolution Algorithm
Route Optimize Scheme for Nest NEMO in Aeronautical Communications
Schedulability Analysis of Fixed Priority Servers for Scheduling Aperiodic Real-Time Tasks – A Review
Security Mechanism Design on the Embedded Computer System
Spectrum Sensing with Clustering in Cognitive Radio Networks
Study on Application of Electronic Delivering Service Based on the Media of Internet in Civil Cases
Study on the Performance of CCSDS Standard Convolution Codes through Simulation
Study on the Quantitative Vulnerability Model of Information System Based on Mathematical Modeling Techniques
The Application of Computer Multimedia Technology in Aerobics Music Orchestration
The Attack Principle and Defense Strategy of SYN Flood under Windows
The Design and Implementation of the Maintenance Training Simulator of a Comprehensive Switch Machine
The Design and Implementation of the Software System of the Maintenance Training Simulator for a Certain Type of Communication Controlling Machine
The Design of Mobile Terminal Security Management System Based on Digital Certificate
The Implementation of Information Sharing Method Based on XML
The Improvement of Computer Information Retrieval Efficiency
The Key Technology Research of Spatial Data Crawl Based on Web
The Survey of Wireless Sensor Networks Information Security in Smart Grid
The Video Encryption Algorithm for H.264 Based on Hyper Chaotic System
An Overview of Wireless Communication Networks for Grid-Enabled Vehicles
Application of Wireless Communication Technology Based on Visual C + + in Smart Home
Research on Multi Agent Data Acquisition and Processing Technology of Distributed Network
Research on 3D Modeling Technology of Battlefield Environment
Costume Innovative Design Based on Kansei Engineering
Design and Implementation of Facial Sketch System Based on Cloud Computing Platform and Big Data
Design and Realization of IE Vulnerabilities Mining Based on Fuzz Testing
Hybrid Laser/Microwave Wireless Communication System for Fractionated Cluster Spacecraft
RFID Technology Applied in Medicine Distribution Center
Study of Accelerating Infrared Imaging Simulation Based on CUDA
The Application Research on Ergonomics Based on the CATIA Software Platform
The Design and Development of Information Conformance Test System Based on IEC 61968
The Design and Implementation of a Certain Information System Joint Debugging and Status Monitoring System
Using Expert Systems and Cloud Computing to Build a Diabetes Diagnosis System
Collaborative Application of Computer Technology in Interior Design
LabVIEW Simulation of Optical Feedback Interference Effect in Laser Diode
Using MATLAB to Establish the Physical Simulation of the Milling Force and Surface Roughness
Chapter 10: Applied Mathematics, Data and Signal Processing, Computational Procedures
Recovery of 3D Non-Rigid Structure from Images Based on Trajectories
3D Model Retrieval Based on Wavelet Transform
A New Denoising Method via Empirical Mode Decomposition
A Novel Approach to Detect Note Onset Using Musical Wavelet
A Perturbed Algorithm for Completely Generalized Set-Valued Nonlinear Quasi-Variational Inclusions
A Preliminary Discussion of Division Algorithm on Digital Matrix
Alternating Direction Method of Solving Nonlinear Programming with Inequality Constrained
An Application to Academic Rankings of New Evaluation Algorithm
An Excellent 2D Window Function
An Improve Cuckoo Search Algorithm for Solving Nonlinear Equation Group
An Improve Firefly Algorithm and its Application in Permutation Flow Shop Scheduling Problem
Application of Variance Analysis Method in Agriculture Information in Statistics
Complete Convergence of Weighted Sums of ρ Mixing Sequences
Data Quality Evaluation in Aerospace Tracking Mission
Digital Signals Processing in the Application of the Watermark
Effects of Shape of Closed Space on Agent Motion
Fast Algorithm for Order Statistics Filters
Hybrid Particle Swarm Optimization Algorithm Merging Simulated Annealing and Mountain-Climb Searching
One Method to Construct the S-Box Based on Improved Chaos Map
Optimized K-Means Hashing for Approximate Nearest Neighbor Search
Optimum Vibrational Resonance in a Time-Delay Bistable System Driven by Biharmonic Signals
Recovery of Sparse Signal and Nonconvex Minimization
Research and Analysis of Network Data Mining Based on Genetic Algorithm
Research and Simulation of Data Mining Method Based on the Association Rules Algorithm
Research on Gridding Algorithm of Remote Sensing Image Segmentation by Region Growth
Riemann Integrablity of the Composite Function
Simhash for Large Scale Image Retrieval
Study on Threshold Method in Gene Recognition
Sufficient Conditions of H-Matrix
The Equivalence Relationship of Matrix and the Corresponding Equivalence Classes
The Identity between the Real Number and Order one Matrix
The Image Fusion Algorithm Based on Rough Neural Network
Uniform Variance Product Quantization
Using Sample and Multilayer Compressed Counting Bloom Filter Algorithm to Realize Elephant Flows Identification
Simulation and Analysis on Fast Modeling for Large-Scale 3D Dynamic Images
SIMP-Based Evolutionary Structural Optimization Method for Topology Optimization
The New Approach to the Invariant Feature Extraction Using Ridgelet Transform
The Research on Visual Parallel Growth Model of Pooideae Repent Stem
An Algorithm Based on Related-Selection for Network of Reversible Logic Gates
An Improved Shark Search Algorithm Based on Domain Ontology
An Improved TFIDF Algorithm in Text Classification
Analysis of Adaptive Beamforming Based on Convex Optimization
Audio Power Amplifier Design and Debugging
Chaotic Genetic Algorithm for Mixed Integer Programming Problem
Cloud Particles Images Features Extraction Based on LabVIEW
Computer Vision Recognition of Incomplete Symbols in Russian Symbols
Correcting the Mistake of the Principle of Light Velocity Invariance and its Effect
An Improve Cuckoo Search Algorithm for Traveling Salesman Problems
Design of Online Pipeline Ultrasonic Data Acquisition and Storage System Based on PCI Bus
Effect Evaluation Method of Video Surveillance System
Face Tracking Based on Particle Filtering and α-β-γ Filtering
Functional Structure Modeling Based on Fuzzy Inference
Identification of Hammerstein Systems with Two-Segment Preload Nonlinearity Based on the Gradient Search
Image Recognition and Counting for the Bacilli Cell Based on the Microscopic Image
Improved Chaotic Bacteria Foraging Optimization Algorithm Particle
Improved Natural Gradient Algorithms for Multi-Channel Signal Separation
Linear Feature Detectionin Images
Measured Scan Data Reduction Combination Algorithm Based on Scan Line
New Criterion for Stability of Linear Systems with Interval Time-Varying Delay
New OFDM Channel Estimation Method Based on ISI Cancellation
Numerical Simulation of the Basketball Flight Trajectory Based on FLUENT Fluid Solid Coupling Mechanics
Optimizing the Greedy Algorithm Used in the TSP Abstract Problems
Paper Currency CIS Image Fuzzy Enhancement and Boundary Detection
Parallel Filtering Algorithm in Three Dimensions for IMM Maneuvering Target Tracking
Research of Speech Enhancement Based on Adaptive Noise Cancellation Methods
Research on Infrared Imaging Modeling and Simulation of Armored Vehicles
Research on Mathematical Methods Based on Special Workpiece Grinding
Research on Voltage Fluctuation and Flicker Extraction Method Based on Null Space Pursuit Algorithm
Study on Global-Piecewise Fitting for Modal Parameter Identification
The Extraction of Wheat Lodging Area in UAV’s Image Used Spectral and Texture Features
RETRACTED: The Impact of Cacheable Algorithms on Cryptography
The Improved Method of Delay-Dependent Stability Criterion for Uncertain Systems with Multiple Time-Varying Delays
Wavelet Analysis of Fault Diagnosis Technology
Theoretical and Experimental Study on Radiant Models of Building Inner Surfaces
Application of Seismic Attributes Using Image Fusion for Small Structure Interpretation in Coalmine
Conjoint Analysis of Focusing Field Characteristics of Radially Polarized Beams Based on LabVIEW and MATLAB
Research on the Subdivision Algorithm about the Approximate Development of the Undevelopable Surfaces
Extraction of Tobacco Leaves Color Features Based on HSI Color Space
The Effect of Urban Aging on Human Capital
Chapter 11: Modern Technologies in Education
An Evaluation Model of Polytechnic Teaching Quality Based on ID3 Decision Making Tree
Design and Implementation of Electronic Bus Stop Boards System Based on Wireless Communication Module
Design and Implementation of Teaching Management System Based on Short Message Service Platform
Design and Implementation of the University Online Course Selecting System Based on B/S Structure
Design of College Teaching Management Information System Based on J2EE Framework
Design of Online Teaching Management Platform Based on Android Internet APP Technology
RETRACTED: English Research Based on Big Data and Data Mining
Individualized Online English Teaching Assisted by QQ Webpages
MOOC: Challenges and Opportunities of Higher Education
Network Management System Design of Education Based on J2EE and JSP Network Framework
Network Moral Education Research Based on the Network Media Age for Students
Research on Management Information System of University Archives Based on B/S Mode
Research on Network Mode of English Writing Learning Based on Constructivism
Research on Problems and Countermeasures Existing in the Process of Autonomous Learning under the Network Environment
Research on Subjective Items Grading Strategy of Network Examination System Based on VBA Macro
Research on the Evaluation of Students’ Development Based on Support Vector Machine
Study on the Information Commons Construction of the University Library
The Application of Cloud Computing Technology in Operating System Teaching Assistant System
The Design and Implementation of Teaching Management System Based on .NET
The Design and Research of Electronic Schoolbag Learning Environment Take "Science of Eyes" of the Science of Primary School for Exam
The Development and Research of the Construction of the Digital Resources - In the Higher Vocational School Professional for Vehicle Inspection and Maintenance
The Research of Application of Multimedia Demonstration
The Research of Calisthenic Mode Based on Complex System Model
University Course Arrangement System Based on Improved Ant Colony Algorithm Design
The Experimental Research on Dynamic Hierarchical Mode
The Research of Knowledge-Based Chinese Segmentation Method
| Reihe/Serie | Applied Mechanics and Materials |
|---|---|
| Zusatzinfo | Illustrations, unspecified |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 4900 g |
| Themenwelt | Technik ► Architektur |
| Technik ► Bauwesen | |
| Technik ► Maschinenbau | |
| ISBN-10 | 3-03835-267-5 / 3038352675 |
| ISBN-13 | 978-3-03835-267-9 / 9783038352679 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
