Earthquake Geotechnical Engineering Design (eBook)
XII, 388 Seiten
Springer International Publishing (Verlag)
978-3-319-03182-8 (ISBN)
Pseudo-static analysis is still the most-used method to assess the stability of geotechnical systems that are exposed to earthquake forces. However, this method does not provide any information about the deformations and permanent displacements induced by seismic activity. Moreover, it is questionable to use this approach when geotechnical systems are affected by frequent and rare seismic events. Incidentally, the peak ground acceleration has increased from 0.2-0.3 g in the seventies to the current value of 0.6-0.8 g. Therefore, a shift from the pseudo-static approach to performance-based analysis is needed.
Over the past five years considerable progress has been made in Earthquake Geotechnical Engineering Design (EGED). The most recent advances are presented in this book in 6 parts.
The evaluation of the site amplification is covered in Part I of the book. In Part II the evaluation of the soil foundation stability against natural slope failure and liquefaction is treated. In the following 3 Parts of the book the EGED for different geotechnical systems is presented as follows: the design of levees and dams including natural slopes in Part III; the design of foundations and soil structure interaction analysis in Part IV; underground structures in Part V. Finally in Part VI, new topics like the design of reinforced earth retaining walls and landfills are covered.
PART I: SITE CHARACTERISATION AND SITE AMPLIFICATION 1 Spatially constrained inversion of surface wave data to build shear wave Velocity models S. Foti, L.V. Socco 2 Site Classification and spectral amplification for seismic code provisions A. Anastasiadis, E. Riga PART II: LIQUEFACTION 3 Sand Liquefaction observed during recent earthquake and Basic Laboratory Studies on Aging effect T. Kokusho, Y. Nagao, F. Ito, T. Fukuyama 4 Liquefaction In Tokyo Bay And Kanto Regions In The 2011 Great East Japan Earthquake K. Ishihara, K. Araki 5 Allowable settlement and inclination of houses defined after the 2011 Tohoku - Pacific Ocean Earthquake in Japan S. Yasuda PART III: RIVER LEVEES AND DAMS 6 Seismic Performances of River Levees; Experience and Prediction I. Towhata 7 Earthquake Performance Design of Dams using Destructive Potential Factors G. R. Saragoni PART IV: FOUNDATIONS AND SOIL-STRUCTURE INTERACTION 8 Seismic responses of shallow footings: a promising application for the macro- Element approach C. di Prisco, R., M. Maugeri 9 Large-Scale Modeling of Ground and Soil-Structure Earthquake Response K. Kim , A. Elgamal , G. Petropoulos , A. Askan , J. Bielak, G. L. Fenves 10 Seismic displacement based design of structures: relevance of soil structure interaction G. M. Calvi, M. Cecconi , R. Paolucci PART V: UNDERGROUND STRUCTURES 11 Performance and seismic design of underground structures K. Pitilakis, G. Tsinidis PART VI: SPECIAL TOPICS 12 Reinforced Soil Walls during the Recent Great Earthquakes in Japan and Geo- Risk based Design Y. Miyata 13 Performances Based Seismic Design of Geosynthetic Barriers for Waste Containment E. Kavazanjian, M. Arab, P. Fox, N. Matasovic
Erscheint lt. Verlag | 3.2.2014 |
---|---|
Reihe/Serie | Geotechnical, Geological and Earthquake Engineering |
Zusatzinfo | XII, 388 p. 306 illus., 212 illus. in color. |
Verlagsort | Cham |
Sprache | englisch |
Themenwelt | Naturwissenschaften ► Geowissenschaften ► Geologie |
Technik ► Bauwesen | |
Schlagworte | Earthquake Geotechnical Engineering • Foundations and Soil Structure Interaction • liquefaction • Performance based Design • site investigation |
ISBN-10 | 3-319-03182-1 / 3319031821 |
ISBN-13 | 978-3-319-03182-8 / 9783319031828 |
Haben Sie eine Frage zum Produkt? |
Größe: 21,3 MB
DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasserzeichen und ist damit für Sie personalisiert. Bei einer missbräuchlichen Weitergabe des eBooks an Dritte ist eine Rückverfolgung an die Quelle möglich.
Dateiformat: PDF (Portable Document Format)
Mit einem festen Seitenlayout eignet sich die PDF besonders für Fachbücher mit Spalten, Tabellen und Abbildungen. Eine PDF kann auf fast allen Geräten angezeigt werden, ist aber für kleine Displays (Smartphone, eReader) nur eingeschränkt geeignet.
Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.
Zusätzliches Feature: Online Lesen
Dieses eBook können Sie zusätzlich zum Download auch online im Webbrowser lesen.
Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.
aus dem Bereich