Mechanical Design and Power Engineering
Trans Tech Publications Ltd (Verlag)
978-3-03835-001-9 (ISBN)
Collection of selected, peer reviewed papers from 2013 the 2nd International Conference on Mechanical Design and Power Engineering (ICMDPE 2013), November 29-30, 2013, Beijing, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 330 papers are grouped as follows:
Chapter 1: Advanced Materials Engineering, Technologies and Processing;
Chapter 2: Applied Mechanics and Dynamics;
Chapter 3: Engineering Design, Modeling, Simulation and Computational Methods;
Chapter 4: Engineering and Automation;
Chapter 5: Electronics and Integrated Circuits, Embedded Technology and Applications;
Chapter 6: Electrical Engineering, Electric Machines and Mechatronics;
Chapter 7: Data and Signal Processing;
Chapter 8: Measurement, Monitoring and Testing Technologies
Preface, Committees and Sponsors
Chapter 1: Advanced Materials Engineering, Technologies and Processing
Capacitive Properties of Polyaniline/Nickel Hydroxide Composites Prepared by Using 4-Amino Thiophenol as the Structure Directing Agent
Study on the Formation of Nanometer Silver Sol by Micro Arc Discharge
Study on Scheduling Method for Reentrant Autoclave Moulding Operation of Composite Materials
Morphology and Strength of Cement Paste from Clay as Nanomaterial
A Material Selection Criterion for Hot-Stamping Dies
Investigation on TiCP/Al Composite Coating by TIG Cladding
Research of the True Flow with High Polymers as a Critical Process Parameter
Nanocrystalline Ni-30wt%Fe Supersaturated Solid Solution Synthesized by Mechanical Alloying
The Effect of VC on the Sintering Ability and Microstructure of WC-Al2O3 Composites
Operation Mechanism of Terminal Distribution of Productive Materials
Optical Properties of DLC-Ag Nanocomposite and Grating Structures on their Base
Study of Typical Filter Material on Dust Cleaning
Friction Properties of Sisal Fiber Reinforced Nano-SiO2 Phenol Formaldehyde Resin Brake Composites
The Properties of Low Yield Ratio and High Heat Input Welding Construction Steel and the Microstructure of HAZ
Effect of Aging Treatments on the Tensile Strength and SCC Resistance of 7A04 Aluminum Alloy
Numerical Simulation on Water Absorption by MX-80 Bentonite for Nuclear Waste Disposal
Effects of Primary Si and Applied Load on the Dry Sliding Wear Behaviors of Hypereutectic Al-20Si Alloy
AFM Analysis of Fullerene C60 Coated Para-Aramid Fabric via Physical Vapor Deposition
Experimental Study on the Electrothermal Effect of Concrete Reinforced with Hybrid Carbon and Steel Fiber
Facile and Green Method for Fabrication of Polystyrene/Multi-Walled Carbon Nanotube Composites with Covalent Functionalization
Study on Chromium-Free Pretreatment Solution of Color Coated Sheet
The Effect of the Microstructure of Semisolid Al Alloy on its Rheology
Surface-Specific Catalytic Activity of Carbon Nanotube Encapsulated with Metal-Oxide Clusters
Room Temperature Atomic Layer Deposition of SiO2 on Flexible Plastic Materials
Nano World: A Novel Path for Modern Drug Discovery
Research and Development of a New Type of Iron Coated Nodularizer
Tribological Properties of KDP Single Crystal
Influence Analysis of Performance on Sasobit Warm Mix Asphalt with Salinity
Heavy Metal Contents of some Wild Edible Mushrooms from Miyi, China
Suizhong 36-1 Oil Field Acid Rock Dissolution Rate Studies
Performance Evaluation of the Carbon Dioxide Corrosion Inhibitor IMC-1
Effect of Surface Finishing on Filtration Performance of a Regenerable Filter Media
Flotation Experimental Study of High-Sulfur Cu-Zn Ore in Yunnan
Study on Beneficiation of a Fe-Mn in Sinkiang
Synthesis and Properties of Barakol Tailored for Fluorescent Biodiesel Marker
Theoretical and Experimental Study on Crystal Detachment from a Chilling Surface with Vibration
Preparation and Performance of Electrodeposited Cr-Pr Coating
Experimental Study for Ultra High Strength Strapping Flat Steel
The Anti-Corrosion Study on Zn-Al-Mg Coated Steel Sheets
Microstructure and Mechanical Properties of Al/AlN Surface Composite Fabricated via Multi-Pass Friction Stir Processing
TEM Characterization of the Microstructure of Hot-Hydrostatically Extruded 93W-4.9Ni-2.1Fe Alloy
Effect of Flame Retardants on Aging Properties of Asphalt Binders
Development of Surface Roughness Prediction by Utilizing Dynamic Cutting Force Ratio
Zeolite Supported Cobalt Catalysts for Sodium Borohydride Hydrolysis
Investigation on Properties of Modified Asphalt Containing Antiaging Agent
Study on Surface Modification of Mesporous Silica SBA-15
Theoretical Analysis and Experimental Study on Heat-Transfer in Cryogenic Gas Atomization Jet Cooling Nickel-Base Alloy
Wetting Behavior of Al Melt/C Interface and Al-Ti Melt/C Interface Assisted by AlF3-KF Salt Eutectic
Characterisation of Micro Channels in Electrochemical Discharge Machining Process
Research of the Chemico-Mechanical Practices in Polymer Material Processing by Cutting
Material Removal Mechanisms in Cu Electrochemical Mechanical Polishing
Analysis of Heat Pipe Filled with Several Oxide Nanofluids on the Start-Up Process
Study on Microstructure Evolution during the Cold Roll-Beating of 40Cr
Nanostructured Surface Effect of Electrode on Doxorubicin Determination
Study on the Theory of a New Kind of Cutting Technology and the Test Analyses
Low Resistance Transparent Electrode
Microfluidic Nonwoven-Based Device as a Potential Biosensor for Sweat Analysis
Different Content of Short Carbon Fiber Influence on the Hardness of Thermo Plastic Resin Composite Material
Study on Application of Carbon Fiber Strengthen Thermoplastic Resin Composite Material
Numerical Control Machining of Scroll with Variable Thickness
Optimization of Cutting Parameters for Turning Based on GALib
XPS Study of the Effect of Low Temperature Ammonia Plasma Treatment on PAN-Based Carbon Fiber
Precise Die Face Design of Drawing Dies for Stamping Process Based on Point Cloud
MQL Application in High-Speed Turning Bearing Steel
Evaluation of Carbon Dioxide Corrosion on N80 Steel
Analyses of Strategies and Problems in Resistance Spot Welding of Dissimilar Materials
Size Tunable near Infrared High-Quality PbS Quantum Dots
Chapter 2: Applied Mechanics and Dynamics
Global Existence and Asymptotic Behavior of Solutions for Nonlinear Wave Equations
Modal Modification of Damped Asymmetric Systems without Using the Left Eigenvectors
Dynamic Characteristics Analysis of the Magnetic Levitation Cylindrical Linear Motion Guide
Study on the Static and Dynamic Characteristics of Linear Rolling Guideway
Periodic Motion Control of Flexible Manipulator via Controllable Local Degree of Freedom
Testing of Hardness on Long Rail Welded Joint by Means of Magnetic Barkhausen Noise Technique
Study on Cutting Performance and Wear Mechanisms of Graded Ceramic Tool
Study on a Portable Abrasive Suspension Jet Cutting Machine for Coal Mines
Study of Proportional Navigation Guidance of Reentry Vehicle Considering Wind Disturbance
Kinematic Analysis Based on Screw Theory of a 3-DOF Cable-Driven Surgical Instrument
Dynamic Analysis on the Principle and General Research Situation of Band Conveyor
Based on 1/4 Vehicle Suspension System for Tire Pressure and Tire Stiffness Nonlinear Studies
Research on FFSR Kinematics and Dynamics Modeling and its Parallel Coordination Motion Control
The Analysis and Solutions of Floor Vibration for Light Bus
Experimental Study on a New Type of Pneumatic Flexible Joint
Dynamic Response of the Fiber Metal Laminated (FML) Plate with Interfacial Damage in Unstable Temperature Field
Dynamic Modeling and Control of Flexible Hexapod Platform for Micro-Vibration Isolation and Precision Tracking
Experimental Study on Hydrodynamic Characteristics of Three-Stranded Polyethylene Rope
Stability of Rock Slope with Geo-Material Described by Nonlinear Criterion
Chapter 3: Engineering Design, Modeling, Simulation and Computational Methods
Numerical Study on Creep Properties of the Governing Stage Blade for Large Power Steam Turbine Considering Airflow Force
An Approach to the Design and Calculation of a New Hydraulic Motor
Mathematical Modeling and Simulation Analysis of Lift for Car Hydraulic System
Performance Optimization of DOA Estimation in Non-Uniform Linear Antenna Array by PSO Algorithm
A New Fault Location Algorithm for Series Compensated Lines Using Two Terminal Data
The Analysis of Voltage Stability in Power System
Simulation on Performance of Sequential Turbocharging Diesel Engine with Inlet and Exhaust Bypass System
Research on the Distriution Rules and Calculation Method of the Parameters of Reservoir of Putaohua Groups in Yushulin Oil Field
Long and Medium Term Load Forecasting Based on Grey Model Optimized by Cosine Function and Time Response Function
Nonlinear Behavior and Characterization of Flow through Preferential Seepage Channels
Virtual Maintenance Technology Application Research in Agricultural Vehicle Repair
Dynamic Detection of the Multiple Hydrate Blockages in Natural Gas Pipeline Using Mass Pulse at the Inlet
Configuring Agents for the Design of Chamber Systems of IC Equipments
Finite Element Modal Analysis of S385 Diesel Engine Block
Improvements for a Hydraulic Excavator's Boom
Workflow Based Assembly Process Control and Management Method for Complex Product
Study the Smoke Characteristics of Fire in the Ship Engine Room Based on the Different Speeds of Inlet Air
Study on the Radar Echo Dynamic Image Simulation
Graph Based Property Representation for the Function Decomposition
Pumping Unit Optimization Design Based on Virtual Prototype Technology
The Finite Element and Experimental Modal Analysis on the Rack of Batching Mixer System
Parameter Design of LS-SVM Based on QPSO and its Application to Node Localization
Application Research of Integrated Design Using Neural Networks
Simulation on Expanding Steady Working Range of Centrifugal Compressor by Self-Recirculation Casing Treatment
A Design of Digital Imaging System Based on Underwater Laser Line-Scanning
Reliability Optimization Design of Mechanical Parts Involving Confidence Level of Reliability
An Inspection Period Analysis of the Grinder Rods Eccentric Wear of the Rod-Pumped well Based on the Multi-Linear Regression Equation
The Numerical Simulation on Diesel Particulate Filter Based on CFD Technology
Use of Drawings Archive for Design Process
Structure Design of a Machining Center Bed Based on Topology Optimization Technique
The Study of EDM TC11 Surface Discharge Mark Diameter Based on the Artificial Neural Network Modeling
Modal Analysis of Diamond Wire Cutting Machine's Bed
Numerical Simulation for Residual Stress and Deformation of Surface Welding on Membrane Water-Wall
Study on Feed Offset in Elliptical Vibration Cutting
The Springback Predication for a Pillar Reinforcement Plate with Drawing Surface Optimization
The Full Flow Simulation of Auto Centre Pillar Reinforce Plate
The Finite Element Analysis of Car's Rear Axle and Prediction of Fatigue Life
A Rigidity and Flexibility Coupled Reliability Calculation Method for the Type 6-6 Stewart Parallel Mechanism
Computational Modal Analyses of a Steel Nuclear Containment Vessel
Structural Analysis and Optimization of Combine Harvester Frame
The Inversion Analysis of the Reservoir Saturation Landslide's Permeability Coefficient
Design on Test Bench of Safety Belt Emergency Locking Property
The Numerical Simulation of Hemispherical Parts Based on FBDF Technology
Precision Analysis of the Surface Model Based on Geomagic Qualify
The Relationship between Frequency Domain Blind Source Separation and Frequency Domain Adaptive Beamformer
Simulation Research on the Potential and Sencitivity Distribution of ECT System Based on Finite Element
A Generalized Thermoelastic Diffusion Problem with Temperature-Dependent Properties
Versatile Assembly Systems for Large Components on the Example of the Aircraft Structure Assembly
Fast Design and Analysis of Large Gantry Machining Center Based on Unit Structure
Research on Determination Method of Maintenance Support Personnel of Equipment System
Finite Element Analysis of Bridge-Foundation Interaction System under Horizontal Seismic Excitation
Flow Field Simulation of Fan Nozzle Jet Used for Disc Tool Cooling with Fluent
Homing and Docking Autopilot Design for Autonomous Underwater Vehicle
Lever–Ejection Mechanism of Two–Color Injection Mould
Structure Vibration Shape Optimization Based on Power Flow Response Analysis
The Demonstration of the Generalized Kalman Filter
A Novel Isar Active Jamming Method Based on Micro-Motion Modulation
Finite Element Analysis and Comparison of Screw Pump Models in Uniform Pressure
Dynamic Analysis and Simulation of Vertical High-Speed Feeding System Based on Direct-Drive Technology
A New Slip Algorithm for Use in Hardware-in-the-Loop Simulation to Evaluate Anti Slip Control of Vehicles
A Prototype of Calligraphy Application Design for Students on Tablet Computer
A Preliminary Design of Recommended Nutrition and Energy Expenditure Application for Smartphone
Two-Level Parallel Alignment Based on Sequence Parallel Vectorization
Loudness Calculation and its Application Based on Moore Model
Motion-Estimation-Drive Fabric Dynamic Simulation
The 3D Modeling and Characteristic Analysis of EBH300 Roadheader
The Technology of Flexible Blank Holder Forming and the Study of its Numerical Simulation
Asynchronous Multi-Sensor Fusion Algorithm Based on the Steady-State Kalman Filter
Numerical Simulation on Effect of Pressure-Released Hole Combined Support with Rockbolt by Dynamic Loading
Synthesized ADRC for One-Level Inverted Pendulum System through Combination of Separating and Assembling
Specifying Concurrent Program Based on TLA
A High-Gain Observer-Based Pd Controller Design for Dynamic Positioning of Ships
Design of Mobile Interactive Learning Community Based on Electronic Cognitive Apprenticeship Mechanism
Study of Curve Planning Algorithm for Partition-Type Rotary Burrs
Partition Scheduling Research of Hard Real-Time and Multi-Core System
An Optimal Consensus Control for Multiple Agents System with Time-Delay and Disturbances
Optimization and Analysis of Double Wishbone Independent Front Suspension Based on Virtual Prototype
Study of Temperature Field Distribution and Deformation of Chain Link Based on Pro/E
Numerical Simulation of Indoor Velocity Field in Winter Effected by Jet Flow Velocity Attached on Exterior Wall
Analysis of Facade Redesign for Enhanced Satisfaction and Improved Building Performance
Numerical Simulation of Air Distribution of Lateral Supply and Return Pattern Affected by Indoor Heated Source Distribution Models
Rigid-Elastic Coupling Multi-Body Dynamics Modeling for a Car and Analysis Optimization of Understeer
Surrounding Rock Rupture Modeling of Tunnel Based on ANSYS
Effects of Mechanical Stimulation on MMP-2 and TIMP-2 Expression of Scleral Fibroblasts after Posterior Sclera Reinforcement
An Optimal Frequency Hopping Sequence Set Based on the Polynomial Theory
Chapter 4: Engineering and Automation
Study on Electronic Controlled Diesel Engine Calibration System Based on CAN-Bus
Transfer Alignment for MEMS Integrated Navigation System Based on H∞ Filter
The Best Speed Limit Range for Road Hump
Development and Application of a PID Auto-Tuning Method to a CNC Servo Control
The Research of the Power Capsule Fan Energy Consumption in Thermal Balance Test Method
Performance of Hydrostatics Spindle under Effect of Mass Unbalance
A Transportation Guidance System Based on Data Mining and GABP
Fuzzy PID Control Mobile Manipulator with Passive Suspension
Sensorless Control of PMSM Based on Sliding Mode Observer
Effects of Chemical Reaction Models on Simulations of Scramjet Nozzle Flow
Research on the Heat Transfer of High-Speed Railway Pantographs
Dynamic Mission Control Method for Multi-UAV System
Hamiltonian Matrix Strategy for Exponential Synchronization of Neural Networks with Diffusion
Dye-Free Coloration in Dyeing and Printing of Tussah Silk Based on PHBA
Sensorless Control of PMSM Based on Improved Sliding Mode Observer Method
Research of Nonlinear Adaptive Flight Control Using Inversible System of Neural Networks
Research on the PID Tuning of Electric Power-Assisted Steering Test Bench System
Recent Development of Electric Vehicles
Study on Radioactive Wastewater Treatment by Precipitation and Membrane Separation
Study on Reactive Support of Distributed Generation
The Application of Linear Motor Analysis
Experimental Investigation of Performance and Emission Parameters Changes on Diesel Engines Using Anisole Additive
Dynamic Analysis of Crank-Connecting Rod-Piston Mechanism of S195 Diesel Engine Based on MATLAB
Comparison of Robust Input Shapers for Elimination of Residual Vibrations
Analysis of Temperature Field of High Speed Diesel Engine Parts and their Structural Optimization
The Thermal Characteristics of the Ball Screw Feed System on a Gantry Machine Tool
Analysis of HEV Engine Start Process Based on μC/Os-II
Development and Application Road Testbench on Vehicle Hydraulic Power Steering System
Chapter 5: Electronics and Integrated Circuits, Embedded Technology and Applications
Examining the Use of B-Splines in Parking Assist Systems
Driving Control Research on Separated Road Surface for Electric Vehicles with Independently Driven Front and Rear Wheels
The Development of Embedded Electronic Jacquard Machine Controller Based on ARM7
Design and Fabrication of MEMS-Based Solid Propellant Microthrusters Array
Design and Implementation of Galaxian Game Based on FPGA Architecture
A Study of Unidirectional Driving Circuit of Piezoelectric Device Considering Energy Recovery
Diesel Engine Working Cycle Utilizing Artificial Intelligent Systems
Active Control of Along-Wind Response of a Tall Building with AMD Using LQR Controller
Nonlinear Modeling of Electrical Equivalent Circuit of Rotary Traveling Wave Ultrasonic Motor
Car Blind Area Alarm System Based on AT89S52 MCU
The Design and Implementation of MSINS/GPS Navigation Computer
A Development and Optimization of Broadcast Live System
The Wireless Ultrasonic Sensor System Based on the Chip of SH79F32
Design and Development of Test and Control System for Hydraulic Steering Control Unit Based on Virtual Instrument
Chapter 6: Electrical Engineering, Electric Machines and Mechatronics
2D Contractile Water Jet Thruster Characterization for Bio-Inspired Underwater Robot Locomotion
Radiation Disturbance from AC Motors in Underground Coal Mines
Research the Stealth Technology of Ship Electric Field by Applying Magnetic Eliminate Strategy
Design of Ultracapacitor-Battery Composite Power System for Coal Mine Trackless Rubber Tyre Electric Vehicle
Coordinate Control of Electro-Hydraulic Hybrid Brake of Electric Vehicles Based on Carsim
The Analysis and Calculation of the Spiral Bevel Gears Transmission System of High-Speed Train
The Drive Control System of Micro Logistics Electric Vehicle
Electric Machine Technology Needs Analysis of the Linear Motor
Vibration Control of the Flexible Robotic Arm through Modal Interaction
A CCTV Lens Robot with Four DOFs for Object Searching
Parametric Identification for a Free-Floating Base Space Manipulator
Covering an Unknown Area with an RFID-Enabled Robot Swarm
3D X-Y-T Space Path Planning for Autonomous Mobile Robots Considering Dynamic Constraints
Mobile Robot Obstacle Avoidance Based on Multi-Sensor Information Fusion Technology
Object Trajectory Information for Robotic Service in Intelligent Space
Medical Tele-Diagnosis Robot (MTR) - Internet Based Communication & Navigation System
Modal Analysis of Scraper Chain Industrial Robot System
Electronic Nose Based on Conducting Polymers for the Discrimination of Medicinal Plants
Chapter 7: Data and Signal Processing
A Comparison of Sandbox Technologies Used in Online Judge Systems
The Performance Analysis of CDMA Traffic Access Self-Similar Equalization Protocol
A Microclimate Monitor Sensor Network with an Effective Data Aggression Algorithm
A Fast Feature Matching Algorithm Based on Multi Scale Spatial Segmentation Technology
Block-Wise Background Subtraction Based on Gaussian Mixture Models
Analysis and Simulation of Meteorological Wind Fields Based on Wavelet Transform
A Scalable Distributed System for Multi-User Virtual Environments
Research on Natural Ventilation Effect Based on Ventilation Network Model - Case Study of an Office Building in Chongqing, China
A Novel Iso-Neigborhood Level Set Framework
A LabVIEW Design for Frontal and Non-Frontal Human Face Detection System in Complex Background
Bayesian Software Reliability Prediction Based on Yamada Delayed S-Shaped Model
Based on Extreme Dynamic Optimization of Mill Load Optimization Algorithm
A Motion Image Detection Method Based on the Inter-Frame Difference Method
Driver Voice Identification System Using Auto-Correlation Function and Average Magnitude Difference Function
Processing Top-N Queries Based on p-Norm Distances
Wireless Distributed Data Acquisition System for EIT
Due Date Model Build and Analysis Based on Multi-Vendors
The Application of Curvelet Transform Method for Regional Gravity Data
Analysis of Shock Wave Signals and Calculation of Trajectory Vector in Acoustic Positioning System
The Data Link Layer Protocols for Underwater Acoustic Networks
Processing Relational Top-N Queries with Text and Numeric Attributes
AgCleaning: A Track Data Filling Algorithm Based on Movement Recency for RFID Track Data
Research and Improvement on HMM-Based Face Recognition
Managing Fragmented Database Replication for Mygrants Using Binary Vote Assignment on Cloud Quorum
A Novel Weighted Dynamic Time Warping for Light Weight Speaker-Dependent Speech Recognition in Noisy and Bad Recording Conditions
Seismic Data Denoising Simulation Research Based on Wavelet Transform
Trajectory Pattern Mining: Methods and Applications
Authentication Algorithm Based on Hash-Tree for Web Single Sign-On
P300 Feature Extraction of Visual and Auditory Evoked EEG Signal
Numerical Analysis of Interaction of Single Pile and Soil Based on ADINA
Data Acquisition and Control of Air-Conditioning Systems Based on Virtual Instrument Technology
Research and Application of Multi-Dimensional Model in 110 Incidents Data Warehouse
Methods of Feature Weighting Calculation and Case Retrieval in CBR Case Base
Teleoperated Road Vehicles – The "Free Corridor" as a Safety Strategy Approach
On Optimal Constellation Shaping for Wireless MIMO Relay Networks Based on Complex Field Network Coding
Hydrocarbon Migration Mechanisms of Hailar - Tamsag Basin
Study on Calculation Method of Formation Pressure Using Well Logging Data
Towards Real-Time Trinocular Visual Odometry
A Prototype of Preliminary Symptom Analysis and Follow-Up Systems for Systemic Lupus Erythematosus Patients
An Efficient Stream Cipher WG-16 and its Application for Securing 4G-LTE Networks
Numerical Simulation of Controlled Rolling of Heavy Plates with Low Compression Ratio
An Online Evaluation Method for Ride Comfort Based on Multivariate Physiological Indicators
Chapter 8: Measurement, Monitoring and Testing Technologies
A New Kind of Beer Bottle Mouth Defect Recognition Method Based on Vision
Measurement of a Single Standing Tree Volume Based on Three-Dimensional Laser Scanner System
Calibration Technique for Micro Inertial Measurement Units
The Research on the Ultrasonic Focusing and TR Thickness Test Technology
Investigate the Method on Measurement Transparence of Tissue Engineered Cornea
Research on Location-Based Personalized Recommendation System
Evaluation of Chinese Vinegar by Electronic Nose
System of Fuzzy Duplicates Detection
Parallelism Measurement System of Porous Parts Based on Computer Vision
Beam Forming of Lamb Waves for Nondestructive Testing of Plates
Research and Application of 3D Digital Detection Technology in Reverse Engineering
Study of Portable Shaft Power Measurement System
Testing Study on a Kind of Vehicle-Mounted Magnetorheological Retarder Testing Bed
Research on an Access Control Model for Radio and Television Monitoring Software Based on T-RBAC
Study on the Infrared Radiation Properties of Different Tourmaline Species
Fast Circular Object Detection Using Multiscale Grayscale Hough Transform
Analysis and Application on Frequency-Response Charateristic Based on Multi-Elements in Near-Surface
A Performance Testing Tool for Source Code
Numerical Study of Buoyancy-Driven Oil Cluster Jumping in Porous Media by a Dynamic Pore-Network Model
Monitoring Heart Rate and Body Temperature Using Wireless Technology (Zigbee)
Intelligent Container Based on Thing of Internet Technologies
The Comparison among Three Control Charts for Monitoring the Auto Correlated Processes
Measurement Method on the Absorption Coefficient of the Material with Large Dimension Based on Two-Microphone
The Research of Intrusion Detection Based on Intelligentization
Development of the On-Line Straightness Detection System for Shafts
Dynamic Tests of Energy Dissipation Structure with Unconsolidated Conical Bearings
Biosensing Surfaces Based on Quantum Dots Array
Study on the Platform of Visual Producing Technology of Greenhouse by Solar Heat in Winter Based on Information Flow Model
Fabrication of a Textile-Based Platform for Rapid Analyte Detection
The Framework for Testing of Web Services through Actions in Addition to Scripts
Electrochemical Immunochromatographic Strip Test for Melamine Biosensor in Milk Products Using Silver Nanoparticles as Probe
Gait Measurement System for the Elderly Using Laser Range Sensor
APD-Based Detection Module of Single-Photons in Chemiluminescence Immunoassay System
The Study of Baseline Correction Method Using Energy Dispersive X-Ray Fluorescence to Detect Heavy Metals
Research on the Whole Condition Loaded Noise Measurement Circuit of Power Capacitor
Research on Sitting Transformer Substations in Rural Areas Based on Improved Genetic Algorithm
A Data-Driven Method of Engine Sensor on Line Fault Diagnosis and Recovery
Research on the Reliability of Distribution Network and its Influencing Factors
Bearing Test Research on the Cable Anchorage Zone of the Main Girder of the Xiamen-Zhangzhou Bridge
An Autonomous Predicted Star Locations Algorithm for Star Sensor
Evaluation on Filter Cleaning Performances Measured by VDI and JIS Testing Rigs for Cleanable Fabric Filter
The Automatic Measurement of Complex Surface Based on ZOO-Type CMM
A Calibration Method for Binocular Vision System Based on CPSO-BP Netural Network
Research and Application of Adaptative Weighted p-Norm LS-SVM
Application of Marginal Spectrum in Active Lamb Wave Damage Monitoring of Plate Structure
Translate the Stateflow Models into Alloy for Safety Analysis
The Settlement Computation of Composite Foundation of Different Typed-Pile Based on the Load Test
Application Seismoelectric Method for Inspection Electrically Conducting Media
Oil Supply Characteristic Test and Application of Fuel Injection Pump for Diesel Engine
Parameter Identification and Attitude Control of Ducted Fan UAVs
Identification of Physical Parameters in a Robotized IPC Device Interacting with Human
An Optimized RFID Unidirectional Authentication Method
Improved AdaBoost Based Infrared Object Detection Algorithm
Modbus/TCP Communication Anomaly Detection Based on PSO-SVM
Research of Fuzzy Neural Network in the Fault Diagnosis of Numerically-Controlled Machine Tool
Identification of Critical Factors to System Performance Using Availability Modeling and Simulation Analysis
Driving Control of a Powered Wheelchair by Voluntary Eye Blinking and with Environment Recognition
| Erscheint lt. Verlag | 2.4.2014 |
|---|---|
| Reihe/Serie | Applied Mechanics and Materials |
| Zusatzinfo | Illustrations, unspecified |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 3400 g |
| Themenwelt | Technik ► Elektrotechnik / Energietechnik |
| Technik ► Maschinenbau | |
| ISBN-10 | 3-03835-001-X / 303835001X |
| ISBN-13 | 978-3-03835-001-9 / 9783038350019 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
