Architectural Drafting and Design, International Edition
Delmar Cengage Learning
978-1-4354-8820-5 (ISBN)
ARCHITECTURAL DRAFTING AND DESIGN, International Edition is an ideal book for all architectural drafters and CAD operators, whether beginning, intermediate, or advanced. An important feature of this best--seller is its step--by--step instructions for the design and layout of each type of drawing associated with a complete set of architectural plans, with projects that can be completed using either CAD or manual drawing methods. The basics of residential design, commercial drafting, basic materials used for construction, common construction methods, and drawings typically associated with commercial construction are all covered in this comprehensive book, which is written to meet the most recent editions of IRC and IBC. Readers will be introduced to the various types of projects that a designer or architect is likely to complete during the actual design process and will gain the knowledge needed to complete the drawings required by most municipalities to obtain a building permit for a single--family residence.
A prolific author and respected instructor, Alan Jefferis has taught drafting technology at Clackamas Community College, an Authorized AutoCAD® Training Center, for more than 31 years. Prior to that, Mr. Jefferis taught for four years at Mt. Hood Community College in Gresham, Oregon. He brings a wealth of professional experience to his writing, including eight years of drafting for structural engineers and 35 years of residential designing. Mr. Jefferis is currently the principal owner of Residential Designs, a design firm specializing in custom, energy-efficient homes. He is a former Autodesk® Developer Network member and a former member of the A.I.B.D. Mr. Jefferis obtained his B.S. degree from San Diego State University in 1972 and has authored or co-authored numerous textbooks on architectural drafting and design and effectively working with AutoCAD. David A. Madsen is an emeritus faculty member in drafting technology and the Autodesk Premier Training Center at Clackamas Community College in Oregon City, Oregon, where he also served as an instructor and department chairperson for nearly 30 years. In addition to his community college experience, David served as a drafting technology instructor at Centennial High School in Gresham, Oregon. He is a former member of the American Design and Drafting Association (ADDA) Board of Directors and was honored by the ADDA with Director Emeritus status at the annual conference in 2005. David is an Autodesk Authorized Author and has extensive experience in mechanical drafting, architectural design and drafting, and building construction. He holds a master of education degree in vocational administration and a bachelor of science degree in industrial education. He is the author of ENGINEERING DRAWING AND DESIGN, GEOMETRIC DIMENSIONING AND TOLERANCING, and PRINT READING FOR ENGINEERING AND MANUFACTURING TECHNOLOGY, and coauthor of ARCHITECTURAL AUTOCAD; ARCHITECTURAL DESKTOP AND ITS APPLICATIONS; ARCHITECTURAL DRAFTING AND DESIGN; ARCHITECTURAL DRAFTING USING AUTOCAD; AUTOCAD AND ITS APPLICATIONS: BASICS, ADVANCED, AND COMPREHENSIVE; AUTOCAD ARCHITECTURE AND ITS APPLICATIONS; AUTOCAD ESSENTIALS; CIVIL DRAFTING TECHNOLOGY; and PRINT READING FOR ARCHITECTURE AND CONSTRUCTION TECHNOLOGY. David P. Madsen is president of Engineering Drafting & Design, Inc., and vice president of Madsen Designs Inc. Dave provides drafting and design consultation and training for all disciplines and is an Autodesk Authorized Author. He has been a professional design drafter since 1996 and has extensive experience in a variety of drafting, design, and engineering disciplines. Dave has provided drafting and computer-aided design and drafting instruction to secondary and postsecondary learners since 1999, and he has considerable curriculum and program coordination and development experience. Dave holds a master of science degree in educational policy, foundations, and administrative studies, with a specialization in postsecondary, adult, and continuing education. He also holds a bachelor of science degree in technology education and an associate of science degree in general studies and drafting technology. Dave is the author of INVENTOR AND ITS APPLICATIONS and coauthor of ARCHITECTURAL DRAFTING AND DESIGN, ARCHITECTURAL DRAFTING USING AUTOCAD, AUTOCAD AND ITS APPLICATIONS: BASICS AND COMPREHENSIVE, CIVIL DRAFTING TECHNOLOGY, ENGINEERING DRAWING AND DESIGN, GEOMETRIC DIMENSIONING AND TOLERANCING, PRINT READING FOR ARCHITECTURE AND CONSTRUCTION TECHNOLOGY, and PRINT READING FOR ENGINEERING AND MANUFACTURING TECHNOLOGY. David A. Madsen is an emeritus faculty member in drafting technology and the Autodesk Premier Training Center at Clackamas Community College in Oregon City, Oregon, where he also served as an instructor and department chairperson for nearly 30 years. In addition to his community college experience, David served as a drafting technology instructor at Centennial High School in Gresham, Oregon. He is a former member of the American Design and Drafting Association (ADDA) Board of Directors and was honored by the ADDA with Director Emeritus status at the annual conference in 2005. David is an Autodesk Authorized Author and has extensive experience in mechanical drafting, architectural design and drafting, and building construction. He holds a master of education degree in vocational administration and a bachelor of science degree in industrial education. He is the author of ENGINEERING DRAWING AND DESIGN, GEOMETRIC DIMENSIONING AND TOLERANCING, and PRINT READING FOR ENGINEERING AND MANUFACTURING TECHNOLOGY, and coauthor of ARCHITECTURAL AUTOCAD; ARCHITECTURAL DESKTOP AND ITS APPLICATIONS; ARCHITECTURAL DRAFTING AND DESIGN; ARCHITECTURAL DRAFTING USING AUTOCAD; AUTOCAD AND ITS APPLICATIONS: BASICS, ADVANCED, AND COMPREHENSIVE; AUTOCAD ARCHITECTURE AND ITS APPLICATIONS; AUTOCAD ESSENTIALS; CIVIL DRAFTING TECHNOLOGY; and PRINT READING FOR ARCHITECTURE AND CONSTRUCTION TECHNOLOGY.
PART 1: INTRODUCTION TO ARCHITECTURAL DESIGN AND DRAFTING.
1. Professionals Architectural Careers, Office Practice and Opportunities.
2. Introduction to Construction Procedures.
3. Architectural Drafting Equipment.
4. Drafting Media and Reproduction Methods.
5. Sketching Applications.
6. Architectural Lines and Lettering.
7. Computer-Aided Design and Drafting in Architecture.
PART II: RESIDENTIAL DESIGN.
8. Construction Specifications.
9. Guidelines and Required Codes that Affect Building Design.
10. Room Relationships and Sizes.
11. Exterior Design Factors.
12. Conservation and Environmental Design and Construction.
PART III: SITE PLANNING.
13. Site Orientation.
14. Legal Descriptions and Site Plan Requirements.
15. Site Plan Layout.
PART IV: THE FLOOR PLAN.
16. Floor Plan Symbols.
17. Floor Plan Dimensions and Notes.
18. Floor Plan Layout.
PART V: SUPPLEMENTAL FLOOR PLAN DRAWINGS.
19. Electrical Plans.
20. Plumbing Plans.
21. Heating, Ventilating and Air-Conditioning.
PART VI: ROOF PLANS.
22. Roof Plan Components.
23. Roof Plan Layout.
PART VII: ELEVATIONS.
24. Introduction to Elevations.
25. Elevation Layout and Drawing Techniques.
26. Millwork and Cabinet Technology, Cabinet Elevations and Layout.
PART VIII: FRAMING METHODS AND PLANS.
27. Environmentally Friendly Framing Methods.
28. Structural Components of Framed Construction.
29. Design Criteria for Structural Loading.
30. Sizing Joist and Rafters Using Span Tables.
31. Determining Simple Beams.
32. Drawing Framing Plans.
PART IX: FOUNDATIONS PLANS.
33. Foundation Systems.
34. Floor Systems and Foundation Support.
35. Foundation Plan Layout.
PART X: SECTIONS AND DETAILS.
36. Sectioning Basics.
37. Section Layout.
38. Alternate Layout Techniques.
39. Stair Construction and Layout.
40. Fireplace Construction and Layout.
PART XI: PRESENTATION DRAWINGS.
41. Presentation Drawings.
41. S1(On CD) Perspective Drawing Techniques.
41. S2(On CD) Rendering Methods for Perspective Drawings.
PART XII: COMMERCIAL DRAFTING.
42. Building Codes and Commercial Design.
43. Common Commercial Construction Materials.
44. Commercial Construction Project Drawings.
45. Structural Drafting.
| Verlagsort | Clifton Park |
|---|---|
| Sprache | englisch |
| Maße | 217 x 275 mm |
| Gewicht | 2280 g |
| Themenwelt | Technik ► Architektur |
| Schlagworte | Architekturzeichnung |
| ISBN-10 | 1-4354-8820-2 / 1435488202 |
| ISBN-13 | 978-1-4354-8820-5 / 9781435488205 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
