Advanced Testing and Characterization of Bituminous Materials, Two Volume Set
CRC Press
978-0-415-55854-9 (ISBN)
Bituminous materials are used to build durable roads that sustain diverse environmental conditions. However, due to their complexity and a global shortage of these materials, their design and technical development present several challenges. Advanced Testing and Characterisation of Bituminous Materials focuses on fundamental and performance testing of binders and asphaltic mixtures. The contributions demonstrate that modern experimental material characterization techniques, sophisticated constitutive modeling, and innovative design provide appropriate tools for pavement performance prediction. The book is of interest to academics and engineers in pavement and road engineering.
National Technical University of Athens, Greece EMPA, Duebendorf, Switzerland Delft University of Technology, The Netherlands University of Illinois at Urbana-Champaign, USA
VOLUME I
1. Evaluation of binder properties
Laboratory study on interlayer bonding using cationic tack coats
C. Raab & M.N. Partl
Factors affecting recovered asphalt binder properties: A theoretical and experimental study
F.G. Praticò & V. Dattola
Influence of low temperature behaviour of PmB on life cycle
M. Hase & C. Oelkers
Influence of granular polymer additives on the asphalt quality
P. Sivapatham, H.J. Beckedahl & S. Janssen
Phase angle determination and interrelationships within bituminous materials
G. Rowe
Evaluation of initial road performance correlating with different tests of binders
G. Malkoç
Laboratory study of environmental performance of binders by headspace gas chromatography
J.E. Poirier, C. Gueit, L. Fanouillet & G. Durand
New fatigue test on bituminous binders and mastics using an annular shear rheometer prototype and waves propagation
J. Van Rompu, H. Di Benedetto, G. Gauthier & T. Gallet
Functional forms for master curve analysis of bituminous materials
G. Rowe, G. Baumgardner & M. Sharrock
Linear viscoelastic spectra of asphalt binders from DSR and BBR
I.B. Kazatchkov, P. Michalica, J. Stastna & L. Zanzotto
Principal component analysis of rheological and hardening data from bituminous binders
E. Nielsen
Rheological and functional evaluation of the interactions between bitumen and rubber
E.J. Peralta, H.M.R.D. Silva, J.C. Pais & A.V. Machado
A thermodynamic approach to healing in bitumen
N. Kringos, A. Scarpas, T. Pauli & R. Robertson
Nanoclay for binder modification of asphalt mixtures
M.F.C. van de Ven , A.A.A. Molenaar & J. Besamusca
First-principles investigation of the multiple phases in bituminous materials:
The case of asphaltene stacking
A.J.M. Schmets, N. Kringos, A. Scarpas, C.P. Duif, G. Schitter & T. Pauli
The morphology of SBS modified bitumen in binders and in asphalt mix
H. Soenen, X. Lu & P. Redelius
2. Testing and modeling the influence of climate and ageing effects
Developing a test method for the accelerated ageing of bituminous mixtures in the laboratory
N. Piérard & A. Vanelstraete
Chemical characterization of laboratory and field bitumen aging in Porous Asphalt Concrete
E.T. Hagos, A.A.A. Molenaar & M.F.C. van de Ven
Influence of temperature and aging on laboratory fatigue performance of asphalt mixtures
I. Artamendi, B. Allen & P. Phillips
Aging of SBS polymer in hot and cold bituminous coatings. Relationship between microstructure and performances: Low temperature and cohesion properties
C. Gueit, M. Robert & G. Durand
Impact of freeze-thaw cycles on the performance of asphalt mixture based permeability
J. Yi, D. Feng & D. Wang
Formulation of authoritative temperature gradients for an analytical design process of flexible pavements using statistical techniques
S. Kayser & F. Wellner
Performance evaluation of prepared gelled hot sealant in cold climates
AI A1-Hadidy & Yi-qiu Tan
Age hardening behaviour of bituminous stabilized materials
M.E. Twagira & K.J. Jenkins
Investigation of friction properties of various road surfaces affecting road safety
T. Pellinen, M. Currie & J. Valtonen
Combined experimental and numerical analysis of moisture infiltration in the modified Lottman test
N. Kringos, A. Scarpas & H. Azari
Assessment of moisture effect on open graded mixes using water sensitivity and Cántabro after immersion tests
B. Rubio, R. Jiménez, F. Pérez & A. Martínez
Moisture damage on bituminous stabilized materials using a MIST device
M.E. Twagira & K.J. Jenkins
Determination of gradual reduction of the flexible pavement bearing capacity
G. Fodor, C. Capitanu & T.C. Damian
Testing of low temperature behaviour of asphalt mixtures in bending creep test
M. Pszczoła & J. Judycki
Effect of beam size on the creep stiffness of asphalt mixtures at low temperatures
R. Velásquez, M. Marasteanu, M. Turos & J. Labuz
Assessment of water sensitivity of asphalt rubber mixtures for wearing course
F.A. Batista, M.L. Antunes & P. Fonseca
Development of a laboratory bituminous mixtures ageing protocol
C. de la Roche, M. Van de Ven, W. Van den bergh, T. Gabet, V. Dubois,
J. Grenfell & L. Porot
3. Hot bituminous mixtures characterization and design
Optimum loading speed for deformation strength test of bitumen mixtures
S.H. Baek, J.C. Kim, Y.S. Doh & K.W. Kim
Enhanced algorithms for the derivation of material parameters from triaxial cyclic
compression tests on asphalt specimen
K. Kappl & R. Blab
Reliability and suitability for standardization of methods for HMA density measurements: Experimental investigation on transverse vs longitudinal variations
F.G. Praticò, R. Ammendola & A. Moro
Research on coordinating deformation between Fiber Bragg Grating strain sensor and asphalt mixture
D. Zejiao, T. Gengliang & T. Yiqiu
Influence of treatments on the surface characteristics of aggregate
D.Q. van Lent, A.A.A. Molenaar & M.F.C. van de Ven
Mix design of grouted porous asphalt concrete for wearing course layers
M. la Agostinacchio, D. Ciampa & S. Olita
“Liquefaction” of asphalt caused by cyclic loading, as a potential reason of extreme rutting
G. György, F. Wellner & I. Herle
Experimental investigation on the dynamic properties of asphalt concrete using filler with waste hydrated lime
M. Arabani, H.R. Joodi & V. Shakeri
Monitoring and designing of wearing courses for orthotropic steel decks throughout the five-point bending test
A. Houel, T.L. N’Guyen & L. Arnaud
Evaluation of modified bitumen, High Modulus Asphalt Concrete and steel mesh as materials for road upgrading
M. Tušar, M. Ravnikar Turk, W. Bańkowski, L.G. Wiman & B. Kalman
Theoretical investigation of the stress distribution in a Bimodular IDT specimen
S. Katicha & G. Flintsch
Investigation of Alkali-Silica Reaction in asphalt mixtures exposed to potassium acetate deicing solution
A.K. Apeagyei, L.J. Struble & W.G. Buttlar
Laboratory tests used in Cuba as low financial resources country for the evaluation of the mechanical properties of the asphalt mix
R. Herrera de la Rosa
Polypropylene fiber modification of asphalt by using mechanical and optical means
S. Tapkın, Ş. Özcan, M. Tuncan & A. Tuncan
Evaluation of Petroleum-Contaminated Soil effect on the properties of hot-mix asphalt concrete using dynamic modulus |E*| and indirect tensile tests
H.F. Hass
Overview of the LOT meso mechanical research into porous asphalt raveling
M. Huurman, L. Mo, M.F. Woldekidan, R.N. Khedoe & J. Moraal
Monitoring the introduction of Enrobé à Module Élevé class 2 onto UK roads
R.C. Elliott, R. Perera, A. Hunter, J.C. Nicholls, N.B. Meite & D. James
On the fracture properties of epoxy asphalt mixture with SCB test
X. Chen, H. Li & Z. Qian
Viscoelastic response of asphalt-aggregate mixes to transient confining conditions
E. Levenberg & J. Uzan
Evaluation of creep compliance of rubberized asphalt in compare with conventional hot mix asphalt
M. Arabani & S.M. Mirabdolazimi
Characterizing volumetric deformation behavior of naturally occurring bituminous sand materials
J.K. Anochie-Boateng & E. Tutumluer
Alternative materials for asphalt mixture—steel slags
E. Diaconu & Ş.M. Lazăr
Evaluation on the shear performance of asphalt mixture through triaxial shear test
J. Yang, H. Zhu & Z. Chen
Development of a Dog-Bone Direct Tension Test (DBDT) for asphalt concrete
C. Koh, G. Lopp & R. Roque
Evaluation of performance grading parameters for crumb rubber modified asphalt binders and mixtures
N. Tabatabaee, H.A. Tabatabaee, M.R. Sabouri & P. Teymourpour
4. Warm and cold bituminous mixtures characterization
Design method for cold and warm emulsion mixtures based on links between laboratory and field
J.P. Serfass, X. Carbonneau, B. Eckmann & J.P. Triquigneaux
Fundamental property evaluation of styrene monomer modified warm-mix asphalt concrete
I. La, M.Y. Ryu, H.H. Kim, K. Ahn, Y.S. Doh & K.W. Kim
An evaluation of use of synthetic waxes in warm mix asphalt
F. Cardone, V. Pannunzio, A. Virgili & S. Barbati
Study of the mechanical behaviour of gravel-emulsions using triaxial tests
P. Hornych, V. Gaudefroy, J.L. Geffard & S. Goyer
Laboratory performance-based assessment of half-warm mix asphalts with high recycling rate by means of the factorial experiment design approach
F. Olard, E. Beduneau, N. Seignez, S. Dupriet & D. Bonneau
Evaluation of the rheological behaviour of Warm Mix Asphalt (WMA) modified binders
H.M.R.D. Silva, J.R.M. Oliveira, E.J. Peralta & C.I.G. Ferrei
VOLUME II
5. Cracking in bituminous pavement materials
Modeling of Top-Down Cracking (TDC) propagation in asphalt concrete pavements using fracture mechanics theory
M. Fakhri, M. Farokhi & P.T. Kheiry
The cracking device with temperature control for the laboratory identification of the road material performance
M. Dicu & M. Lobază
Mode II cracking in asphalt concrete
A. Braham & W. Buttlar
Experimental study on resistance to cracking of bituminous mixtures using the Fénix test
F. Pérez, R. Botella & G. Valdés
Fatigue effects in uniaxial cyclic tensile stress test: The link between stiffness decrease and accumulation of irreversible strain
K. Mollenhauer & M. Wistuba
Experimental study of the waveform shape effect on asphalt mixes fatigue
D. Bodin, J.-M. Balay, M. Merbouh, D. Breysse & L. Moriceau
Experimental investigation of crack propagation in asphalt concrete
R.A. Tarefder & E.M. Kias
Theoretical analysis of the 4 point bending test
M. Huurman & A.C. Pronk
Investigation of the PH model as a prediction tool in fatigue bending tests
with rest periods
A.C. Pronk & A. Cocurullo
Fatigue behaviour of bitumen in tension-compression loading mode: Rheological analysis and comparison with mix fatigue
E. Chailleux, D. Bodin, C. de La Roche, M. Leguern & N. Vignard
Mixed-mode cracking in asphalt concrete
A. Braham, C. Peterson & W. Buttlar
Fatigue lines for asphalt mixtures used in wearing course
C. Răcănel, C. Romanescu, M. Dicu, A. Burlacu & C. Surlea
Mechanism of fatigue crack growth and fracture behavior in bituminous roads
R. Lugmayr, M. Jamek & E.K. Tschegg
Simplified fatigue performance modeling of ALF pavements using VECD+3-D Finite Element Modeling
B.S. Underwood, Y.R. Kim, S. Savadatti, S. Thirunavukkarasu & M.N. Guddati
Size effect investigation on fracturing of asphalt concrete using the cohesive softening Discrete Element Model
H. Kim, M.N. Partl, M.P. Wagoner & W.G. Buttlar
6. Fundamental laboratory test methods and models
On the importance of performing accurate material characterization tests for bituminous materials
N. Kringos & A. Scarpas
Prediction of rutting risk of bituminous concrete using complex modulus
K. Ait Mokhtar, E. Ghorbel, S. Saoula & S. Haddadi
Application of simplified VECD modeling to the fatigue life prediction of asphalt concrete mixtures
B.S. Underwood, E.T. Hou & Y.R. Kim
Experimental observation of asphalt mix characteristics in the range of low temperatures
P. Mondschein & J. Valentin
Calibration and validation of a visco-elasto-plastic constitutive model for bituminous conglomerates
N. Baldo, M. Pasetto, N. Kringos, C. Kasbergen & A. Scarpas
Modulus measurement: European standardisation possibilities
X. Carbonneau, Y. Legal & S. Quigniot
The influence of the specimen shape on the results of the uniaxial tensile test
C. Weise & A. Blasl
Experience with triaxial loading systems for the testing of road construction materials
P. Hyzl, D. Stehlik, M. Varaus & P. Zdralek
The estimation of the dynamic modulus of asphalt mixture from creep test results
F. Martinez & S. Angelone
Application of a balanced mix-design concept to thin asphalt overlay mixes: Minimizing rutting and reflective-cracking
L.F. Walubita & T. Scullion
3D finite element modeling of polymer modified asphalt base course mixes
X. Liu & A. Scarpas
Neural networks in rheology: Theory and application
M. Oeser & S. Freitag
7. Test methods and models for permanent deformation
Permanent deformation behaviour of bituminous mixtures containing incinerator bottom ash aggregates under uniaxial testing conditions
M.M. Hassan & H.A. Khalid
A new performance related test method for rutting prediction: MSCRT
S. Dreessen, J.P. Planche & V. Gardel
Effect of binder type on the permanent deformation resistance of asphalt mix at different temperatures
M. Smiljanic, I. Pap & U. Tatic
Rutting evaluation of asphalt binders and mixes
T.L.J. Wasage, I.B. Kazatchkov, J. Stastna & L. Zanzotto
An integrated approach to modeling rutting of flexible pavements
V.T. Thushara & J. Murali Krishnan
Equiviscous temperature based on Low Shear Viscosity: Evaluation as binder indicator for rutting and critical discussion of the test procedure
J. De Visscher & A. Vanelstraete
The effect of volumetric properties of asphalt concrete mixture to wheel track rutting with respect to EN and BS rutting test methods
A. Nikolaides & E. Manthos
Rutting resistance of SMA determined with triaxial and wheel-tracking tests
J.L.M. Voskuilen & M.F.C. van de Ven
Rut resistance of asphalt concretes of different aggregate gradation
K. Zhdanyuk, O. Volovyk, V. Zhdanyuk & Y. Prusenko
8. Field methods for structural behavior assessment
Damage identification in flexible pavements using FWD technique
A. El Ayadi, B. Picoux & C. Petit
Dynamic approach for the evaluation of the load carrying capacity and stability of flexible pavements with the Falling Weight Deflectometer
S. Riedl
Behavior of asphalt pavements subjected to non-standard heavy vehicles
P.E. Sebaaly & R.V. Siddharthan
Field behavior of foamed bitumen pavement material
V. Papavasiliou & A. Loizos
Evaluation of cracking in overlays in Quebec: A case study
A. Carter, D. Perraton, M. Meunier & M. Paradis
9. Recycling of bituminous pavement materials
Utilization of aggregate production waste filler in cold recycling mix optimization
J. Valentin & P. Mondschein
Rehabilitation of an Italian highway by Cold In-Place Recycling techniques
F.A. Santagata, M. Bocci, A. Grilli & F. Cardone
Fracture energy evaluation of Cold In-Place Recycling mixtures
S. Charmot & P. Romero
The use of marginal materials in road constructions: Proposal of an eco-compatible section
M. Agostinacchio, M. Diomedi & S. Olita
Influence of active filler, curing time, and moisture content on the strength properties of emulsion and foamed bitumen stabilized mix
S. Zulakmal, A.A. Nafisah, M. Mohd Yazip & H. Mat Zin
An experimental study on the recycling of powder extinguishers into bituminous mixtures
F.G. Praticò, A. Moro & R. Ammendola
Key characteristics of materials stabilised with foamed bitumen
D.C. Collings & K.J. Jenkins
In-plant asphalt cold recycling in rehabilitation of Babaei expressway project
V. Ayan, A. Khavandi, A. Nikzad Gharehaghaji
10. Synthesis of international coordinated research initiatives
RILEM interlaboratory test on interlayer bonding of asphalt pavements
H. Piber, F. Canestrari, G. Ferrotti, X. Lu, A. Millien, M.N. Partl, C. Petit, A. Phelipot-Mardelé & C. Raab
RILEM interlaboratory test on pavement performance prediction and evaluation
H. Piber, M.N. Partl & C. Raab
New tests for polymer-modified binders: Results of a Belgian round robin test
J. De Visscher, S. Vansteenkiste, A. Leuridan, N. Piérard, E. Schelkens & Ph. du Bus de Warnaffe
Comparative test on indirect tension modulus test
X. Carbonneau & Y. Le Gal
Binder fatigue properties and the results of the Rilem Round Robin Test
D. Sybilski, M. Gajewski, W. Bańkowski, H. Soenen, E. Chailleux & G. Gauthier
11. Other topics
Skid-resistance capability of two newly resurfaced runways in Israel
M. Livneh
Chemical spill tolerance of hot mix asphalts: New research and gaps identification
F.G. Praticò, R. Ammendola & A. Moro
Result of numerical analysis of efficacy geogrids on reinforced pavements’ vertical and horizontal deformations
F. Saleh, Gh. Shafabakhsh & Ah. Hadad
Life cycle costs of typical asphalt pavement rehabilitation techniques in Colorado USA
S. Shuler, C. Schmidt & J. Goldbaum
Performance oriented payment adjustment for flexible pavements
P. Sivapatham & H.J. Beckedahl
Performance of hot mix asphalt surface under high tire pressure aircraft landing gear configuration at the FAA National Airport Pavement Test Facility
N. Garg, T. Bennert & H. Brar
Quantification of the highway costs as a function of the road traffic and speed
A.C. Valle de Souza & D. Cardoso de Lima
| Erscheint lt. Verlag | 14.5.2009 |
|---|---|
| Verlagsort | London |
| Sprache | englisch |
| Maße | 174 x 246 mm |
| Gewicht | 2721 g |
| Themenwelt | Technik ► Bauwesen |
| Technik ► Maschinenbau | |
| Technik ► Umwelttechnik / Biotechnologie | |
| ISBN-10 | 0-415-55854-9 / 0415558549 |
| ISBN-13 | 978-0-415-55854-9 / 9780415558549 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
