Novel Materials Processing by Advanced Electromagnetic Energy Sources (eBook)

Proceedings of the International Symposium on Novel Materials Processing by Advanced Electromagnetic Energy Sources (MAPEES'04)

S. Miyake (Autor)

eBook Download: PDF

2005 | 1. Auflage
400 Seiten
Elsevier Science (Verlag)
978-0-08-045612-6 (ISBN)

Infos

Proceedings of the International Symposium in Novel Materials Processing by Advanced Electromagnetic Energy Sources (MAPEES'04)

*Identifies and details recent progress achieved by advanced electromagnetic energy sources in materials processing.
*Explores novel approaches to advanced electromagnetic energy processing of materials in an attempt to discover new and unique industrial fields.

Inhalt

Cover 1
CONTENTS 6
Preface 16
Organizing Committee 17
Plenary Papers 20
Smart Processing Development of Novel Materials for Electromagnetic Wave Control 22
A Review of Cluster Ion Beam Process Technology 30
Plasma Processing 38
Structural Control of Nanocarbon Materials by Novel Plasma Processing (Invited) 40
Amorphous Carbon Film Deposition by Magnetically-Driven Shunting Arc Discharge (Invited) 48
RF Sheet-Plasma Source Using Permanent Magnets 54
Deposition Uniformity of Pulsed Vacuum Arc Ion Source 58
Thermal Properties of Gravity-Free Gas-Arc Discharge Measured in a Jet Plane and Its Application Nano-Tube Production 64
New Method for Measuring Ion Energy in Pulsed Vacuum Arc 68
Relationship between H-/D- Production and Plasma Parameter Control with Magnetic Filter in Volume Negative Ion Sources 74
Novel Method to Increase Energy Density of Arc Plasma Jet 78
Material Coating Using Electromagnetically Accelerated Plasma Jet 82
Process Control of Carbon Nanotube Formation Using RF Glow-Discharge Plasma in Strong Magnetic Field 86
Development of Arc Discharge Method in Organic Solvents for the Formation of DNA Encapsulated Carbon Nanotubes 90
Effects of Sputtering Due to Ion Irradiation on Plasma Anisotropic CVD of Cu 94
Evaluation of Contribution of Higher-Order Silane Radicals in Silane Discharges to Si-H2 Bond Formation in A-Si:H Films 98
Nanometer-Ranged Metallic Coatings by Noble Pulsed Cathodic Arc Deposition 102
Preparation of Hard Carbon Films by MCECR Plasma Sputtering Method 106
Microwave/Millimeter-Wave Processing 110
Micro- and Millimeter-Wave Processing of Advanced Materials at Karlsruhe Research Center (Invited) 112
Simultaneous Use of Different High Frequency Energy Sources for Material Processing (Invited) 118
High Power Submillimeter Wave Radiation Sources, Gyrotron FU Series (Invited) 124
What Type of Transport Phenomena can be Induced by Microwave Field in Solids and How These Phenomena Contribute to Materials Processing (Invited) 130
Powerful Electron Beams for Cyclotron Resonance Devices 138
Quasi-Stationary Electro-Thermal Heating Model for Microwave/Hybrid-Processed Materials Using Greens Function Techniques 144
Aerospace CFRP Structure Fabrication with the 2.45 GHz Hephaistos System 148
Optimization of Slotted Waveguides for 2.45 GHz Applicators Using Nobel Slot Types 154
The Role of High Pressure Plasma in Microwave Sintering Processes 158
Heating Behavior of Slags in 2.45 GHz Microwave Applicator 162
Rapid Heating by Single-Mode Cavity Controlled at 6 GHz 166
Millimeter-Wave Dielectric Measurement of SiC Powders as a Basis of Millimeter-Wave Sintering of Ceramics 170
Boron Carbide Ceramics Sintering by Using 24 GHz Compact Gyrotron 174
Instrumented Millimeter Wave Sintering of Mechanically Alloyed Amorphous Ceramic Powders for Bulk Nanocrystalline Synthesis 178
Millimeter-Wave Effect on Sintering of Silicon Nitrides by 28 GHz Millimeter-Wave Radiation 182
Mechanical Evaluation for Silicon Nitride Sintered by 28 GHz Millimeter-Wave Heating 188
Intergranular Microstructure of Yb2O3-added AIN Sintered by Millimeter-Wave Heating 192
Laser Processing 196
All Solid State High Power Lasers for Materials Processing (Invited) 198
Effect of Surface Orientation on Characteristic Weld Microstructure Evolution of Ni-Base Superalloy Single Crystal 204
Modification of Hydroxyapatite Crystallization Using CO2 Laser 208
Synthesis of Ti-Fe-O Thin Films Prepared by Pulsed Laser Deposition 212
Oxidation Behavior of TiN and Ti-Ni-N-O Thin Films Prepared by Pulsed Laser Deposition 216
Oxidation Properties of Cr(N,O) Thin Films Synthesized by Pulsed Laser Deposition 222
Laser Ablation Processing of Solid Surfaces Immersed in Water 228
Penetration Welding of Plastics Using a Tunable CO2 Laser and a Transparent Heat Sink 232
Ion Cluster and Ultrafine Particle Processings 236
Experimental Study of Cluster Size Effect with Size-Selected Cluster Ion Beam (Invited) 238
Development of the Large Current Cluster Ion Beam Technology 242
Gas Cluster Ion Beam Source for Secondary Ion Emission Measurements 246
Surface Structure Dependence of Impact Processes of Gas Cluster Ions 250
High Quality Oxide Thin Film Formation with Gas Cluster Ion Beam Assisted Deposition System 254
Morphology Dependence of Surface Smoothing of Ar Gas Cluster Ion Beams 260
Comparison of Irradiation Effects between Cluster and Monomer for DLC Film Deposition 264
CO2 Laser Annealing of Pb(Zr,Ti)O3 Aerosol Deposition Film on Stainless-Steel-Sheet 268
Infrared Thermography: An Introductive Thermal History Study in Aerosol Deposition 272
Surface Modification of Nanoparticles by Mechanical Milling with Glow Discharge 276
Synthesis of Fine Ferrite Particles from Powder Mixtures by Using Well-Controlled Thermal Plasmas 280
Pulsed High Current Processing 284
Electrical Field Enhancement of Compaction and Super-Plastic Deformation of Ceramics (Invited) 286
Mechanical Properties of Binderless WC Produced by SPS Process (Invited) 294
Homogeneity of Porous Metals Prepared by Pulsed Electric Current Pressure-Sintering 300
Preparation of Composite Dielectric Ceramics by Spark Plasma Sintering Method 304
Sintering Behavior of Metallic and Ceramic Powders During Pulsed Electric-Current Sintering Process 308
Spark Plasma Sintering of Cu-TiB2 Nanocomposite 312
Production of Nd-Fe-B Magnets by Spark Plasma Sintering 316
Pulse Current Pressure Sintering of Al/Al2O3 Functionally Graded Material 320
Discharge Phenomena and Effect of Pulse Condition in Pulsed Current Sintering 324
Microstructure and Thermoelectric Properties of ZnO Ceramics Prepared by the Polymerized Complex and SPS Methods 328
Pulsed Electric-Current Press Bonding of Aluminum Alloy to Stainless Steel 332
Synthesis of NaxCo2O4 Thermoelectric Oxide by the Polymerized Complex Method and SPS Methods 336
Mechanical Properties of SiC/Ti-15V-3Cr-3Sn-3Al Composites by Spark Plasma Sintering 340
Dielectric Properties of Pb(Zr,Ti)O3 Ceramics Prepared by Pulsed Electric Current Sintering 344
Functional Materials Synthesis 348
In-situ Observation of Alloy Phase Formation in Isolated Nanometer-Sized Particles (Invited) 350
Progress and Application of Nano-Surface Engineering in China (Invited) 358
Nanocomposite Coatings with Enhanced Hardness (Invited) 364
High-Strength SiC Matrix Production with Polymeric Techniques 376
SiC Nanowires with In-Situ Carbon Coating by CVG Process 380
Hydrogen Absorbing Films Prepared by Ion Beam Assisted Deposition 384
Fabrication and Fracture Toughness of SiC Nanowires/Tyranno-SA/SiC Composite 388
Low-Temperature Synthesis of Superhard Ti-Si-N Nanocomposite Films 392
Preparation of Fe2VAl Compound Using MA-PCS Process and the Thermoelectric Property 396
Oxidation Resistance of Sintered Chromium Nitride Composite 400
Finite Element Analysis of SiC/SiC Composite Joints by Using a New Interface Potential 404
Finite Element Analysis of Surface Texture of Substrate on Local Damage of Hard Coating Under Sliding Contact 408
Coating and Modification of Materials 412
Recent Research on Flattening Behavior of Thermal Sprayed Particle onto Flat Substrate Surface (Invited) 414
Formation and Physical Properties of Cr Base Alloy by Sputtering (Invited) 420
The Development of Nano-Photocatalytic TiO2 Coatings by Thermal Spraying 426
Nitride Reinforced TiAl Formed by Reactive Low Pressure Plasma Spraying 430
Influence of Surface Roughness on Room Temperature Adhesional Bonding 434
Microstructure Control for Joining Advanced Stainless Steel 438
Auger Analysis of (Al, Ti)N/Si Interface Synthesized by Ion Beam Assisted Deposition and Optimization of Film Formation Factors 442
Research of TiN Coating by Means of Gas Tunnel Type Plasma Reactive Spraying 446
Simultaneous Chromizing-Siliconizing Diffusion Coating on Austenitic Stainless Steel 452
Ternary Nitride Films Synthesized by Cathodic Arc Method 456
The Atomic Structure of Amorphous Carbon Films 460
Rapidly Solidified Titanium Aluminide-Based Composite Deposits with Dispersed Nitride Particles Produced by Reactive Plasma Spraying 466
Effect of Ultrasonic Wave on the Morphorogy of Fracture Surface of Alumina/Copper Brazing 470
Author Index 474

Produkt-Details

• Erscheint lt. Verlag: 21.11.2005
• Sprache: englisch
• Themenwelt: Sachbuch/Ratgeber
• Themenwelt: Naturwissenschaften ► Physik / Astronomie ► Atom- / Kern- / Molekularphysik
• Themenwelt: Technik ► Maschinenbau
• ISBN-10: 0-08-045612-X / 008045612X
• ISBN-13: 978-0-08-045612-6 / 9780080456126