5th EPI International Conference on Science and Engineering (EICSE)
Aggregated Book
This book presents the latest research results in materials science, engineering science, and technology which were introduced at the 5th EPI International Conference on Science and Engineering 2021, Indonesia. The edition will be interesting and useful to researchers and engineers from materials science, microelectronics, mechanical engineering, civil engineering and architecture.
Preface
Chapter 1: Properties and Processing of Steel and Alloys
Mechanical Properties Comparison Between Induction Hardening and Rehardening of Axle Shaft AISI 1043 According to JIS G 0559 Standard
Strength Analysis of ST 41 Steel as Propeller Shaft with Quenching Heat Treatment and Tempering after Carburizing Carbon Media Variations
Experimental Investigation on the Effect of EDM Wire Cut Parameters on the Formation of Cr23C6 in AISI 316 Steel
Analysis of Voltage, Current Density, and Welding Speed of Flux Core Arc Welding on the Hardness and Micro-Structure of High Strength Low Alloy (ASTM A572)
The Influence of Machining Variables on the Quality of the Shaping Process on Hard Steel
Chapter 2: Composite Materials and Structures
Crashworthiness Analysis of Vehicle Crash-Box Filled with Aluminium Foam
Improving Fiber-Matrix Compatibility by Surface Modification of Coconut Coir Fiber Using White Rot Fungi
Ramie Fiber Woven Composite: The Effect of Feedrate Variation on the Tensile Strength of the Open Hole in the Drilling
Mathematical Model of Shear Stress Transfer at Fiber-Matrix Interface of Composite Material
Study on the Mechanical Properties and Behavior of Corrugated Cardboard under Tensile and Compression Loads
Chapter 3: Materials and Processing Technologies in Photovoltaics and Mechatronics
Conductive Glass with Simple Spray Deposition Method for Dye-Sensitized Solar Cell Application
Semiconductor TiO2 Coating Deposited by Microwave Plasma Method
Fabrication of Chemotaxis Microfluidic Device Mould Using Digital Light Processing 3D Printing Method
Chapter 4: Materials in Construction
Shear Strength Analysis of Rock due to the Effect of Surface Roughness Based on Laboratory Testing and Numerical Modeling
External Shear Strengthening of RC Beams with Anchored Geopolymer Fiber Mortar Panel: An Experimental Study
Failure Mode of GFRP Bar RC Beams Using GFRP Sheet as Shear Reinforcement
Strength Development of Seawater Mixed and Cured Concrete with Various Replacement Ratios of Fly Ash
Study on some Properties of Sustainable Mortar Incorporating Processed Waste Tea Ash
Investigation of Depth Variations of the Bamboo Twigs for its Acoustical Performance
The Sound Absorption Characteristics of Bamboo Twigs Based on Surface Combination Patterns
The Utilization of Geopolymer Mortar as Permanent Formwork in Reinforced Concrete Beam
Assessment of Stone Ash as a Fine Aggregate Material to Meet the Value of Normal Concrete Compressive Strength
Sound Absorption Coefficient Analysis for Composite Made of Agricultural Waste
Chapter 5: Structural Mechanics
Analytical and Experimental Study for Vibration of Laminated Rectangular Plates with Point Masses
Accurate Results by the Ritz Method for Free Vibration of Uniform Annular Plates
The Critical Load on Quadrilateral and Circular Hollow Pipes under Pure Bending and Pure Torsion
Laboratory Testing and Numerical Analysis on Reinforced Concrete Frames with Prefabricated Cellular Lightweight Concrete (CLC)
A Study of Alternative Materials for Sail Mast of Sandeq
| Erscheinungsdatum | 22.08.2023 |
|---|---|
| Reihe/Serie | Scientific Books Collection |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 630 g |
| Themenwelt | Naturwissenschaften ► Physik / Astronomie ► Atom- / Kern- / Molekularphysik |
| Technik ► Elektrotechnik / Energietechnik | |
| Technik ► Maschinenbau | |
| Schlagworte | 3D Printing • alloy • Building Materials • composite • Conductive Glass • Electrical Discharge Machining • Heat treatment • mechanical properties • Polymer • Quenching • Solar cell • steel • Structural Mechanics • welding |
| ISBN-10 | 3-0357-2772-4 / 3035727724 |
| ISBN-13 | 978-3-0357-2772-2 / 9783035727722 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
