Injectable Fillers (eBook)

Facial Shaping and Contouring

Derek H. Jones, Arthur Swift (Herausgeber)

eBook Download: EPUB

2019 | 2. Auflage
John Wiley & Sons (Verlag)
9781119046950 (ISBN)

Infos

In the innovative field of cosmetic dermatology, the range of products and methods available to patients is expanding all the time. Prominent among these are facial fillers, which, when injected into and beneath the skin, help alleviate wrinkles and improve smoothness. However, the many fillers on offer have varying characteristics and effects, and practitioners must be properly trained in order to administer them safely and successfully.

Injectable Fillers offers those performing these popular procedures an in-depth and far-reaching survey of current best practices, with a strong emphasis on safety. Covering everything from the science behind facial fillers to their appropriate means of application, the book places each product in context, demonstrating the pros and cons of the expanding range of hyaluronic acids and calcium hydroxylapatite microspheres, and exploring injectable submental fat reduction with sodium deoxycholate. This second edition broadens the scope of discussion to also include chin, mandible, temple, nose, brow, and forehead injections, as well as the use of cannulas as an alternative to needles.

Derek H. Jones, MD, is a Medical Director at the Skin Care and Laser Physicians of Beverly Hills, Los Angeles, CA, USA.

Arthur Swift, MD, is a Plastic Surgeon at the Westmount Institute of Plastic Surgery, Montreal, QC, Canada.

Inhalt

List of Contributors vii

Foreword ix

About the Companion Website xi

1 Injection Anatomy: Avoiding the Disastrous Complication 1
Arthur Swift, Claudio DeLorenzi, and Krishnan M. Kapoor

2 The Mathematics of Facial Beauty 29
Arthur Swift and B. Kent Remington

3 The Temple and Forehead 63
Tatjana Pavicic, Ardalan Minokadeh and Sebastian Cotofana

4 The Eyebrow Revisited 77
B. Kent Remington and Arthur Swift

5 Periorbital Rejuvenation 93
Arthur Swift and Herve Raspaldo

6 The Midface and Cheeks 119
Jeanette M. Black, Ardalan Minokadeh and Derek H. Jones

7 Injection Rhinoplasty - Aesthetic Considerations and the Anatomical Basis for Safe Injection Techniques 131
Woffles T.L. Wu

8 The Lips 149
Shannon Humphrey

9 The Mandible, Jawline, and Chin 165
Amir Moradi and Jeff Watson

10 Submental Contouring 175
Frederick C. Beddingfield III, Jeanette M. Black, Paul F. Lizzul, and Ardalan Minokadeh

11 Avoidance and Management of Complications 191
Katie Beleznay and Derek H. Jones

Index 207

Textauszug

CHAPTER 1
Injection Anatomy: Avoiding the Disastrous Complication

Arthur Swift1, Claudio DeLorenzi2, and Krishnan M. Kapoor3,4

1 The Westmount Institute of Plastic Surgery, Montreal, QC, Canada

2 The DeLorenzi Clinic, Kitchener, Ontario, Canada

3 Fortis Hospital, Mohali, Punjab, India

4 Anticlock Clinic, Chandigarh, India

Over the past two decades, neuromodulators and ‘dermal’ fillers have provided cosmetic physicians with the tools necessary to enhance facial features non‐surgically and usually with minimal discomfort. Having a profound impact on beauty is no longer limited to a surgeon's knife wielded by an experienced specialist proficient in facial anatomy and aesthetics. Originally intended for the safer location of intradermal deposition, synthetic filler therapy has been extended beyond the eradication of unwanted wrinkles and folds into the realm of facial contouring and volume restoration. The transition of more robust fillers into deeper treatment planes by practitioners unfamiliar with the attendant vital anatomy has resulted in the appearance of devastating intravascular complications.

Complications have arisen from the use of various dermal fillers since their inception. Historically, paraffin, Vaseline, and many other materials were used that could not only cause many of the same types of devastating vascular complications, but also result in serious adverse events that were long lasting due to tissue incompatibility and immune‐mediated issues [1]. Fat may be considered the archetype of ‘deep’ fillers, and embolic phenomena have been reported from many sites over the decades since it was first developed as a technique for volume replacement (including blindness, stroke, and tissue necrosis) [2]. Since the development of the hypodermic needle, many different drugs that were either partially insoluble or that had serious inflammatory effects on the linings of blood vessels (particularly arterial wall linings), were implicated in many serious adverse events resulting from the ensuing ischemia when accidental intra‐arterial injection caused inflammatory desquamation of the arterial lining tissue. From this historical perspective, then, the present state of filler complications does not present anything new, but rather mirrors experiences with other filler materials. The most successful modern fillers (the class of hyaluronic acid derivatives) now mainly show improved results for tissue integration and also lack inflammatory effects [3].

It is imperative that all injection specialists have an intimate understanding of facial anatomy and its relationship with injection therapy so that serious adverse events are minimized. A 100% foolproof method of facial injection therapy is impossible because of the variability in facial anatomy. Anatomy textbooks only give an average depiction of what exists in vivo, with numerous classifications and variations of vascular patterns reported (with their intendant percentages) for every facial region [4]. It is therefore crucial that treating physicians familiarizes themselves with the different techniques available to limit intravascular compromise (Table 1.1).

Table 1.1 Techniques to limit intravascular injection.

Know your injection anatomy – avoid danger areas and depths.

Aspiration before injection in higher risk areas [5]. This is not a guarantee of extravascular location as false negatives are high. Nonetheless, it is still the authors' recommendation, especially in higher risk areas.

Slow injections with the least amount of pressure [6] (definitely advantageous). Adverse events will commonly occur when the injector is rushing to complete a treatment.

Move the tip of the needle slightly with delivery of the product [7]. Although theoretically this will limit the amount of possible embolic material, it is controversial as the tip can move in or move out of a vessel.

Incremental injections of 0.1–0.2 cm3 of product [8]. Severe adverse events have been associated with a significant deposition of product.

Small syringe to deliver precise aliquots [9]. The amount of product deposited over time is a significant factor in embolic events.

Small needles to slow the injection speed [10]. This is controversial in that the higher gauge can conversely access the smaller diameter vessels inaccessible to larger bore needles.

Blunt flexible microcannulae [11]. Intravascular transgression is still possible and has been reported. A cavalier approach is not warranted.

Addition of a small amount of vasoconstrictor in the product or as a preparatory step may effect some vasoconstriction without the long lasting block nor blanching of the skin [12].

Patient selection (e.g. previous surgery with scarred beds portends an increased risk of a vascular event).

The injector should always observe the skin at the area of injection and not the syringe in his/her hand, just as a driver watches the road and not the steering wheel. Drivers have rear view mirrors into which they glance to prevent accidents – so too does the injector whose rear view mirror is the glabellar region. Glabellar blanching can be the first indication of intravascular injection in the face regardless of the injection location. Therefore occasional glancing into the ‘rear view mirror’ of the glabellar region for signs of blanching, regardless of the site of facial injection, is advisable.

The occurrence of patient pain distant to the site of injection, in spite of lidocaine with the commercially available products [13]. (N.B. This is not noted in every case)

The possibility of delayed onset (several hours later) of symptoms and signs that require emergent care [14].

In principle, all the facial areas currently considered for treatment can be divided into higher risk or lower risk areas, but as we shall see, there are no ‘zero risk’ areas. This is an important detail that is often glossed over by manufacturers, who are keen to promote fillers as safe and effective. As the numbers of practitioners (who often learn the techniques in a weekend course) increase, certain trends in complications have been identified. One important issue is that many new practitioners have no recent experience with the vascular anatomy of the face, and worse, are completely unfamiliar with the previous reports of serious complications with the use of fillers. The combination of exuberance for a new technique, its seemingly easy implementation, and the lack of knowledge of the consequences of severe complications, has resulted in many unrecognized adverse events with high morbidity. Although serious adverse events can happen even in the hands of the most experienced injectors, when these are properly recognized and treated appropriately, the outcome can be good, but when they are not, the outcome can be seriously debilitating or mutilating. The purpose of this chapter is to familiarize the injector with the ‘injection anatomy’ of the face, so that practitioners can properly gauge the level of risk for the intended treatment.

1.1 Injection Anatomy Defined

Many different categories of human anatomy have been described, most of which relate to the instrument being used and the ensuing treatment or therapy (e.g. surgical anatomy, radiological anatomy, etc.).

Injection anatomy, not previously described, is centred on the use of a syringe and needle rather than a scalpel. Where the tip of the needle resides (the point from which the product will flow) once under the skin is crucial. Injecting under the skin involves encountering vital structures. Knowledge of injection anatomy therefore pertains to the depth of injection as it relates to the location of the tip of the needle.

Injection anatomy can be defined as the study of regional anatomy as it relates to surface landmarks and the underlying depth of targeted tissue and vital structures. Although a myriad of vascular patterns exist in two dimensions, there is relative consistency in the depth (third dimension) at which vessels pass through the tissues in specific geographical regions of the face. Appreciating the depth location of the tip of the needle, although not infallible, should guide treatment into ‘safer’ lower risk zones for specific facial regions. The clinician's ability to delineate these facial anatomical zones at the time of treatment is limited to visual and palpable topographical assessment. To this end, five bony and three soft tissue landmarks must be discerned, which divide the face into specific treatment regions according to depth (Figure 1.1).

Figure 1.1 Eight topographical landmarks for defining injection zones. The five boney markers are the temporal...

Produkt-Details

• Erscheint lt. Verlag: 13.2.2019
• Sprache: englisch
• Themenwelt: Medizin / Pharmazie ► Allgemeines / Lexika
• Themenwelt: Medizinische Fachgebiete ► Chirurgie ► Ästhetische und Plastische Chirurgie
• Themenwelt: Medizin / Pharmazie ► Medizinische Fachgebiete ► Dermatologie
• Schlagworte: contouring the brow with injectable fillers • contouring the forehead • contouring the mid-face with injectables shaping the mid-face with injectables • contouring the temple • Cosmetic / Esthetic Dermatology • Dermatologie • Dermatology • Guide to injectable fillers for facial shaping and contouring • Kosmetische u. Ästhetische Dermatologie • mathematics of facial beauty • Medical Science • Medizin • periorbital contouring • periorbital shaping • Plastic & Reconstructive Surgery • plastic surgery techniques • Plastische u. rekonstruierende Chirurgie • resource to injectable fillers for facial shaping and contouring • shaping the brow with injectable fillers • shaping the cheeks with injectables • shaping the forehead • shaping the lips with injectables • shaping the nose with injectables • shaping the temple • text on injectable fillers for facial shaping and contouring • the anatomy of facial shaping and contouring • understanding injectable fillers for facial shaping and contouring
• ISBN-13: 9781119046950 / 9781119046950