Diffusion Phenomena: Aspects of Characterization and Experiments
Trans Tech Publications Ltd (Verlag)
9783035710038 (ISBN)
Present issue is devoted to problems classical mass diffusion such as phase transformations, corrosion behavior, coatings and microstructures and extensions to new research in the field of nanotechnology. Were investigated classical carbon and alloy steels, titanium and aluminum alloys as well as polymer materials. Technical applications relate to oil recovery, surface quality, and improved material properties for machining and processing. Many of these topics are related to experimental measurements and methods as well as numerical simulation and approaches to predict properties and processes.
Modification of the Diffusion Process in the Iron-Aluminum System via Spark Plasma Sintering/Field Assisted Sintering Technology
Effect of Interfacial Heat Transfer Coefficient on Dendritic Growth and Microhardness during Horizontal Directional Solidification of an Aluminum-Copper Alloy
Precipitation Processes in Hot-Rolled Al-Mn-Sc-Zr Alloy
Comparative Analysis of the Surface Roughness Parameters due to the Machining Uniformity
Improving Surface Roughness of Steel Parts XC48 by Tribofinishing Process
Corrosion Monitoring of the Active/Passive/Transpassive State of a High-Alloy CrMnNi Steel by Means of Acoustic Emissions
Formation and Characterization of Hard Coatings on Ductile Iron Grade 100-70-03
Effects of Vanadium on the Continuous Cooling Transformation of 0.7 %C Steel for Railway Wheels
HF Transport Coefficients in Polymers Used for Microelectronic Applications
Mass Transfer Behaviour in Hybrid Solvent Oil Recovery Processes
Brazing Vacuum Ceramic Tubes - A Diffusion Profile in the Joint
The Effect of Differences in the Diffusion Coefficients of Components on the Onset of Convection in Isothermal Multicomponent Systems
A Dilatometric Study of the Non Isothermal Aging of a Cold Rolled Al-Mg-Si Alloy
Identification of Casting Conditions Influence on the Structure and Properties of Al-Si-X Alloy Castings by Experimental and Virtual Way
Identification of the Moisture Distribution in the Intensively Heated Porous Sand Mould
The State of Grain Boundaries and Grain-Boundary Diffusion in Ultrafine-Grained Mo Obtained by Severe Plastic Deformation
Atomic Transport in Nano-Сrystalline Thin Films
Application of Nanotechnology for Enhanced Oil Recovery: A Review
Self and Chemical Diffusion in Liquid Al-Ag
Microwave Drying of Sweet Potato (Ipomoea batatas (L.)) Slices: Influence of the Osmotic Pretreatment
The Effect of Processing Method on Microstructure and Mechanical Behavior of Ti-6Al-4V Plate Produced by Powder Metallurgy Technique
Evaluation of the Microstructure and Charpy Impact Toughness of Hot Worked Powder Ti-6Al-4V
| Erscheinungsdatum | 03.06.2016 |
|---|---|
| Reihe/Serie | Defect and Diffusion Forum |
| Zusatzinfo | Illustrations |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 340 g |
| Themenwelt | Mathematik / Informatik ► Informatik ► Theorie / Studium |
| Naturwissenschaften ► Chemie ► Analytische Chemie | |
| Technik ► Maschinenbau | |
| ISBN-13 | 9783035710038 / 9783035710038 |
| Zustand | Neuware |
| Informationen gemäß Produktsicherheitsverordnung (GPSR) | |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
