A contribution to the modelling of the charge acceptance of lead-acid batteries – using frequency and time domain based concepts
Seiten
2008
|
1., Aufl.
Shaker (Verlag)
978-3-8322-7659-1 (ISBN)
Shaker (Verlag)
978-3-8322-7659-1 (ISBN)
- Titel ist leider vergriffen;
keine Neuauflage - Artikel merken
The demands on electrical storage devices in automotive applications and other technical systems have greatly increased in recent years and are going to grow further in the future. This requires developing and sizing new vehicle systems, devising more efficient operating strategies and establishing the system limits. The so-called “SLI”-battery has gained importance. Today, the lead-acid battery enables highly dynamic operation of powerdemanding, electromechanically and electrohydraulically driven systems. Supplying these systems exclusively by the “combustion engine and generator system” can hardly be realized, since this system is characterized by significantly lower dynamics and a lower peak power than the battery. The battery also allows for engine idle-off periods (without turning the loads off). Additionally, a small fraction of the braking energy can be returned to the system. Since the design of those complex systems is barely manageable without using simulation tools, appropriate device models of vehicle components are necessary; a battery model constitutes one of the essentials.
The proposed model precisely represents the processes which are of main interest for the respective battery applications. For automotive applications, short-term periods with very high discharging currents (cranking), longer discharging events (engine idle-off) and charging periods are the most important operating modes that have to be covered by the model. Charging events are highly important, because the battery can deliver energy only as long as an opportunity for sufficient recharge is given. The charge acceptance, however, is influenced by a number of factors. Battery temperature, state-of-charge and the preceding operation of the battery have to be taken into account. Particularly in future automotive applications, the battery is going to be subject to highly dynamic operation. This is due to the intensive charging and discharging events caused by the mentioned strategies such as recuperation and engine idle-off periods.
The proposed model precisely represents the processes which are of main interest for the respective battery applications. For automotive applications, short-term periods with very high discharging currents (cranking), longer discharging events (engine idle-off) and charging periods are the most important operating modes that have to be covered by the model. Charging events are highly important, because the battery can deliver energy only as long as an opportunity for sufficient recharge is given. The charge acceptance, however, is influenced by a number of factors. Battery temperature, state-of-charge and the preceding operation of the battery have to be taken into account. Particularly in future automotive applications, the battery is going to be subject to highly dynamic operation. This is due to the intensive charging and discharging events caused by the mentioned strategies such as recuperation and engine idle-off periods.
| Reihe/Serie | Aachener Beiträge des ISEA ; 50 |
|---|---|
| Sprache | englisch |
| Maße | 148 x 210 mm |
| Gewicht | 248 g |
| Einbandart | Paperback |
| Themenwelt | Technik ► Elektrotechnik / Energietechnik |
| Schlagworte | Battery model • Charge acceptance • HC/Technik/Elektronik, Elektrotechnik, Nachrichtentechnik • Impedance spectroscopy • Lead-acid battery • Simulation |
| ISBN-10 | 3-8322-7659-9 / 3832276599 |
| ISBN-13 | 978-3-8322-7659-1 / 9783832276591 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
Mehr entdecken
aus dem Bereich
aus dem Bereich
DIN-Normen und Technische Regeln für die Elektroinstallation
Buch | Softcover (2023)
Beuth (Verlag)
CHF 119,95
Kolbenmaschinen - Strömungsmaschinen - Kraftwerke
Buch | Hardcover (2023)
Hanser (Verlag)
CHF 69,95
