Advances in Energy Science and Technology
Trans Tech Publications Ltd (Verlag)
978-3-03785-634-5 (ISBN)
Selected, peer reviewed papers from the 2012 International Conference on Sustainable Energy and Environmental Engineering (ICSEEE 2012), December 29 -30, 2012, Guangzhou, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The studies cover topics such as: Development and Utilization of Solar Energy, Development and Utilization of Biomass Energy, Development and Utilization of Wind Energy, Nuclear Energy, Hydrogen, Fuel Cell and Other New Energy, Energy Storage Technologies and Energy-Saving Technologies, Energy Materials and Energy Chemical Engineering, Energy Security and Clean Use, New Energy Vehicles and Electric Vehicles, Green Building, Energy-Saving Buildings and Construction Technology, Development and Management of the Energy and Resource Industry, Power System and Automation.
Preface and Conference Organization
Chapter 1: Development and Utilization of Solar Energy
Comparative Studies on the Efficiency of Solar Flat-Plate Collector and Evacuated Tube Collector
Design and Analysis of a Photovoltaic Power System with Bi-Directional Inverter
Improving Silicon Concentrator Solar Cells Performance by Dielectric Liquids Immersion
Nonlinear Response of Si-Based Solar Cells in Linearly Polarized Light under Low Illumination
Research on Photovoltaic Power Capacity Optimization in Microgrid
The Development Present Situation and its Countermeasures about the Solar Energy Industry in China
The Effect of Substrate Temperatures on CdS Film Prepared by Thermal Evaporation
An Improvement Method for Extracting Five Parameters of a Solar Cell Based on Lambert W-Function with the Current-Voltage Data
Application of Super-Capacitor in Grid-Connected Photovoltaic Power Generation System
Cluster Control of Grid-Connected PV System
Design of Parabolic Trough Solar Collector (PTC) and Numerical Simulation for Improving the Efficiency
Economics Reasearch for Photovoltaic Power Generation Project Based on Different Business Model
Investigation in the PV Converter Smoothing Circuit Size Reduction vs. Loss in Energy Capturing
Short-Term Prediction Model for a Grid-Connected Photovoltaic System Using EMD and GABPNN
Short-Term PV Generation System Forecasting Model without Solar Radiation Based on Improved Wavelet Neural Network
Simulation of New Solar Heating System for Heating Biogas Digesters above Ground in Cold Regions
Sky Emissivity at Clear Nights in Yunnan, China
The Endothermic Performance Experimental Study of New Type Cavity Heat Receiver
Transmission and Temperature for the Surface Icing Solar Pond
An Innovative Design of the Automatic Solar Tracking Control Scheme
Analysis of the Diffusion Effect of a New Continuous Diffusion Furnace
Design of Boundary Mode Flyback Control Auxiliary Power Supply of a PV Inverter
Heat Loss Measurement and Analyses of Solar Parabolic Trough Receiver
Honeysuckle Drying by Using Hybrid ConcentratorPhotovoltaic-Thermal (PV/T) Dryer: An Experimental Study
Investigation Research on Solar Heating Methods in a Typical City in Southern China
Performance Research of a Solid Desiccant Material Regenerating Directly with Solar Energy
Studies on the Grid-Connected Characteristics about Large-Scale Photovoltaic Power Bases
Study on Application of Solar Heating System Integrated Latent Heat Store Heat Exchanger
The Research of the Available and Utilization of Solar Energy in Rural Areas - The Example from the Loess Plateau Area
A Solar Power Storage Trolley
Effects of the Boundary Condition on the Performance of a Falling Film Dehumidifier of Solar Liquid Desiccants Air Conditioning System
Experimental Study on the Solar Air Collector Module Used in Northern Rural
Modeling and Simulation of Three-Phase Two-Level Grid-Connected Photovoltaic System
Development of the Training Equipment for the Output Characteristics of PV Module
Research on the Application of Solar Collector and Phase Change Technology
Analysis of Optimal Configuration of Building Integrated Photovoltaic (BIPV) Array under Moving Partial Shade
Chapter 2: Development and Utilization of Biomass Energy
Deacidification of Jatropha Curcas Oil by Extraction for Biodiesel Production
Evaluating Effects of Expanding Grain-Based Fuel Ethanol and Cassava-Based Fuel Ethanol on Agriculture in China - A Multiplier Decomposition within a Social Accounting Matrix Framework
Installed Capacity Prediction of Biomass Power Generation in China Based on Gray Dynamic Model
Optimization of Culture Conditions for Biosynthesis of Lipopeptide by Bacillus Subtilis with Starch
Screening of Microorganisms Capable of Producing Ethanol by Direct Fermentation of D-Xylose
The Catalytic Disproportionation of Glycerol over Supported Alkaline Metal Carbonate Catalysts
A Biomass Boiler Hybrid Solar Thermal Power System in Computer Aided Design
Cloning, Expression and Characterization of a Lipase from Bacillus Subtilis Strain I4 with Potential Application in Biodiesel Production
Conversion of Glucose to Levulinic Acid Catalyzed by ZSM-5 Loading SO42-/ ZrO2
Determination of Fatty Acid Methyl Esters in Biodiesel Produced from Pistacia Chinensis Oil by GC
Development of Biodiesel in Japan and its Revelation to China
Effects of Cultivation Conditions and Media Compositions on Lipid Productivity of Native Microalga Chlorella vulgaris U3-3
Efficient Production of Biodiesel from Rapeseed Oil Deodorizer Distillate: One-Pot Esterification and Transesterfication with Compound Lipases
Experimental Research on Combustion Characteristics of Palm Kernel Meal in a Circulating Fluidized Bed
Experimental Study on the Co-Firing Power Generation of Municipal Solid Waste and Biomass
Optimized Enzymatic Production of Waste Oil to Biodiesel
Research Progress of Methanogens Methanogenic Metabolic Pathway and its Ecological Factors
Study on Air Preheater Corrosion Problem of CFB Biomass Directed-Fired Boiler in Zhanjiang Biomass Power Plant
Synthesis of Biodiesel from Castor Oil Catalyzed by Cesium Phosphotungstate with the Assistance of Microwave
Thermogravimetric Analysis of Raw and Demineralized Biomass Materials
Direct Conversion of Glucose in Ethanol and Ethanol/Water Mixed Medium
Effective Viscosity of Chlorella Sp. USTB-01 Suspension for Biofuel Production
Experimental Study on Catalytic Pyrolysis of Biomass Pellet
Investigation and Analysis of Biomass Energy Utilization in Tianjin
Prediction of the Cold Flow Properties in Biodiesel Blends
The Stress Finite Element Analysis of Die-Holes in Biomass Flat Die Briquetting Process
An Empirical Model for Methane Generation Rate during Anaerobic Digestion of Kitchen Wastes
Diethanolamine Pulping Process of Pinus Kesiya
Pyrolysis Characteristics of Rice Husk Using TG-DTG Analysis
Synthesis of Biodiesel by Phase Transfer Catalysis
TG-FTIR Analysis on Evaporation, Decomposition and Combustion Characteristics of Bio-Oil
Using Backcasting Methodology in Decision-Making of Biomass Energy Development
Components Characteristics of Wood Vinegar from Rice Husk Continuous Pyrolysis and Catalytic Cracking
Is Cornstalk a Best Substitute for Corn in Bioenergy Production in China?
Green Biodiesel Production Catalyzed by Basic Ionic Liquid
Optimal Physical Pretreatment Conditions for the Release of Carbohydrate and Protein from Dairy Manure
Experimental Investigation on NOX Emission and Combustion Characteristics of South China Typical Biomass
Chapter 3: Development and Utilization of Wind Energy
An Instantaneous Phase Angle Detection Algorithm under Asymmetric Grid Voltage Dips
Research on Wind Power Fluctuation and its Impacts on Power System Frequency
The Research of Finite Element Modeling and Contacts for Connecting Bolts of Wind Turbine
A Discussion of the Impact of Building Wind Deflector on Changes in Wind Field by Using the Numerical Simulation
A New Method for Horizontal Axis Wind Turbine Angle of Attack Determination
A Robust Algorithm for Wind Power Forecasting Based on Projection Pursuit and Back Propagation Neural Network
A Study of Electricity Generating from Small Multi-Blade Wind Turbine for a Household
Comparison of Archimedean Screw and Normal Pump in Pumped Storage Generation Combined with Wind Power Generation
Field Experiment of Blade Surface Pressure of a HAWT
Large-Eddy Simulation of Flow around a Horizontal-Axis Wind Turbine
Numerical Simulations of Spherical Vertical-Axis Wind Rotor
Reliability Modeling of Wind Farm Considering the Outages of Connection Cables
Research on an Improved Control Strategy for Enhancing LVRT Ability of DFIG System
Rotational Turbulent Wind Field Simulation of Wind Turbine
The Realization of Individual Pitch Control
Using Dynamic Reactive Power Compensation Equipments to Enhance Low Voltage Ride-Through Capability of Fixed Speed Asynchronous Wind Farms
Numerical Simulation of Unsteady Flow for Variable-Pitch Vertical Axis Wind Turbine
Stall Nonlinear Flutter of Wind Turbine Blade Modeled as Thin-Walled Composite Beam Integrated with Structural Damping
Variation of Aerodynamic Load Engineering Analysis during Wind Turbine Run
Wind Turbine Pitch Angle Control Based on ANFIS
Research on Matching of Main Engine and Turbocharger on Sail-Assisted Ship
The Applicability of Two-Equation Turbulence Models in Wind Velocity Prediction
WTG’s Gearbox Condition Assessment by Matching the Hilbert-Huang Spectrum of Vibration Signal
Aerodynamic Performance Analysis of a Large Scale Wind Turbine Blade under Variable Condition
Forecast of Energy Storage Applied in Wind Power Integration
Probabilistic Assessment of Wind Farm Active Power Based on Monte-Carlo Simulation
Some Controlling Strategies of DFIG to the Grid Turbulence
Chapter 4: Nuclear Energy,Hydrogen, Fuel Cell and Other New Energy
Investigation of Temperature Field of the Canned Motor of Nuclear Primary Pump
Nuclear Power Accidents and its Development Prospects
Analysis on Public Participation in Decision-Making of Nuclear Power in China
Detailed Nuclear Power Plant Model for Power System Analysis Based on Matlab-Simulink
Concern on the Sustainable Development of China Nuclear Power Emergency Treatment after the Japan Fukushima Nuclear Crisis
A Study on Generation Expansion Planning Considering Transition of Nuclear and Renewable Policy
Flow Field Model Experiment Studies of a Bipolar Plates PEMFC
Numerical Study the Performance of Microfluidic Fuel Cell with Porous Electrodes
Design of Dynamic MCFC Simulation Bed for MBOP Feasibility Test of Marine Applications
Study of Hydrogen Production Using Photovoltaic
The Effect of the Precipitator Concentration on the Activity of Mesoporous Cu-Ce-La Mixed Oxide Catalyst for Water-Gas Shift Catalyst
Simultaneous Electricity Generation and Electrochemical Decolorization of Azo Dyes in Microbial Fuel Cells
Feasibility Analysis on Oscillating Buoy Wave Power Device for Ocean Buoy
Effect of the Supernatant Liquid Recirculation on H2 and CH4 Production in the Two-Phase Anaerobic Fermentation
Review on Biopolymer Membranes for Fuel Cell Applications
Chapter 5: Energy Storage Technologies and Energy and Power Saving Technologies
An Experimental Investigation of a Cold Thermal Energy Storage System
Sizing and Economic Analysis of Lithium-Ion Battery Energy Storage System
The Research for Uncertainty Heat Transfer Process of Phase Change Thermal Storage Based on Monte Carlo Method
Wind/Storage System Capacity Configuration Research Based on the Benefits of Energy Saving and Emission Reduction
Performance Evaluation of a Thermal Energy Storage
An Electricity-Replacing-Oil Strategy Based on Chinese Subway System’s Energy Saving and Emission Reduction Model
Energy-Saving Performance Studies of Road Tunnel Luminaries
Research on the Mechanism of Energy-Saving Technology Innovation in Energy Service Companies
Study on Low-Temperature Dyeing of Cashmere Fiber
Analysis of D-STATCOM Reducing Loss and Saving Energy in Distribution System Based on PSCAD
Behavior-Based Detection of Abnormal Power Consumption for Power Saving
An Upgrade of Seawater Reverse Osmosis with Work Exchanger - A Case Study
Analysis on Energy Saving Factors and Research on Energy Efficiency Evaluation Indexes of Ventilation and Air Conditioning System in the Underground Engineering
Deduction and Analysis of Driving Exergy Loss in Oil Pipeline System
Construction of Scientific Evaluation System for Energy Saving and Emission Reduction Oriented to Product Full Life-Cycle
Chapter 6: Energy Materials, Energy Chemical Engineering and Processes
Corrosion Behavior of AZ91/AZ91-0.4%Nd Alloys in 3.5wt.% NaCl
Effect of Substrate Temperature on One-Step Magnetron-Sputtered Cu(In,Ga)Se2 Thin Films for Solar Cells
Porous LiMn2O4 Spheres Synthesized by Topochemical Route Using the Porous Mn2O3 as Precursor
Effect of Heat-Treatment Condition on the Morphology and Electrochemical Property of LiFePO4
Molecular Dynamics Simulations of Interaction between the Mixture of Glycerol and 1,6-Hexanediol and Silicon Dioxide Surface
Synthesis of TiO2 - CNT Nanocomposites and its Application to Dye-Sensitized Solar Cells
Carbon Dioxide Reforming of Methane over Carbonaceous Catalyst in a Plug Flow Reactor
An Novel Synthesis Route of γ-Nitro-β-Aryl-α-Methylene Arone: Microwave-Assisted Michael Reaction of Phosphorus Ylides to Nitroolefins
Model Used for On-Line Testing Resolution Ratio of Baked Limestone in Lime Furnace
Studies on Olefin Production by Steam Cracking of Waste Oil Blended with Naphtha
Study of Effect of Flame Retardants on Initiation Process of Lignocellulose Materials at Heat Flux Acting
The Effects of Methanol on Honehe Lignite Pyrolysis
The Pyrolysis Characteristics of Low Ash Lignite
High Liquid-Gas Ratio Separation in Pre-Cyclone Jet Singlet Oxygen Generator
Electrical Energy per Order and Photodegradation Efficiency of Advanced Oxidation Processes
Chapter 6: Energy Materials, Energy Chemical Engineering and Processes
Rod-Like LiMn2O4 Evolved from Porous Spherical Flower-Like Carbonate Precursors
Preparation and Characterization of Chitosan Edible Film
The Synthesis of Levulinic Acid Synthesis from Glucose Using ZSM-5 Zeolite Catalyst
A Hydrothermal Process for the Fabrication of Nickel Foam Based NiO and Co3O4 Nanostructures with Excellent Properties for Electrochemical Capacitors
Analysis of the Pressure Drop of the Horizontal Liquid-Solid Circulation Fluidization Bed with Kenics Static Mixers
Theoretical Investigations of the Mechanism of CO2-CH4 Reforming Reaction Catalyzed by Transition Metals (Pt, Rh, Ru) under a Supercritical Condition
Research on the Making of Activated Carbon from Disposable Chopsticks and its Adsorption Characteristics for Cr(VI)
The Investigation on Application of Oxygen-Enriched Combustion in Cement Rotary Kiln
Chapter 7: Energy Security and Clean Use
Regional Energy Security Analysis with Cluster Eensemble Method: A Case of Typical Regions in China
Constrained Multi-Objective Differential Evolution for Security Constrained Economic/Environmental Dispatch
Influences of Clean Syngas Preheating Temperature on IGCC Power Plant Performances
Effect of Acid-Washing on the Distribution of Phenols from Wulagai Lignite Pyrolysis
Effect of FeSO4 on the Reactivity of Petroleum Coke with CO2 by TG-FTIR
Primary Study on Relationship between PAHs and Macerals in Coal
The Application and Trend of the FSRU for LNG Import in China
Statistic Analysis on Coal and Gas Outburst Accident in China Coal Mines from 2006 to 2012
Chapter 8: New Energy Vehicles and Electric Vehicles
Demand Forecast of Electric Vehicle Charging Stations Based on User Classification
Research on the Development of New Energy Vehicle Industry in China
Device Configuration and Investment Decision-Making of Fast Charging Station
Equipment Optimization Method of Electric Vehicle Fast Charging Station Based on Queuing Theory
Research on Developing Countermeasures of the EV Industry in China
Research on Harmonic of Electric Vehicle Charger Based on Matlab
Improvement of Total Regenerated Energy by Two Motors Considering Initial Speed-Ratio of CVT in Power-Train during Reducing Speed of Automotive
Research on Load Modeling of Electric Vehicles
Control Strategy Design and Simulation for Plug-in Hybrid Electric Vehicle
Experimental Research on Energy Conservation and Emission Reduction of LPG Vehicles
Contactless Charging Technology of Electric Vehicle
The Development of Intelligent Maintenance and Assessment Simulation System for Automotive Air-Conditioning
A Method for Calculating Energy Savings and Carbon Emissions Reduction Benefits of Electric Vehicles
Analysis of Welding Fatigue on Electric Scooter Using CAE Approach
Chapter 9: Green Building, Energy-Saving Buildings, Construction and Buildings Technologies
Analysis of Energy Utilization Technology for Ecological Buildings
Microclimate Variations with Wall Configurations for Chinese Solar Greenhouses
Optimized Energy Saving Design Analysis for Bashang New Rural Residences of Northwestern Hebei Province
Perception and Management System for Building Energy Consumption Based on Internet of Things Technology
A Comparative Study on Different Evaluation Standards of Green Building
Analysis of Heat Transfer by Thermal Bridge of Corner Wall in a New Glass Regenerated Pumice External Wall System
Exploring Conservation and Development Strategies for Architectural Heritage:A Case Study from Paris Hotel in Kaiping, Guangdong
Stability Analysis on the Slope Located in Embankment Dam Downstream under Seepage Action
The Analysis of Square Enclosure Air Layer's Heat Transfer in Building Materials
Analysis of Green Building Design in the Northeast Cold Region
Research on Ultrahigh Pumpability of C80 HS & HP Concrete
Study on the Performance of Reinforced Embankment on Mountain Slope Using Full-Scale Model Experiments
The Current Situation of Rural Construction of Southern Shanxi in China and its Ecologic Strategy
The Development of New Sandwich Thermal Insulation Composite Wall Based on the Housing Industrialization
Experimental Study on Aseismatic Property of a Two-Bay Two-Story Lightweight Steel Frame
Explore on Green Construction of the Construction Engineering
Problem Analysis and Countermeasures of the Construction Enterprises in the Green Construction
Reviews on the Research Status and Prospect of the Prefabricated Concrete Shear Wall Structure
Role of Corrosion in Life-Cycle Performance Evaluation of Existing Buildings with Steel Moment Resisting Frames: II
The Research and Application of Masonry Structure Reliability Rating Method Based on Extenics
Analysis and Evaluation on Compaction Property of Energy-Saving and Environment-Protecting Road Material
Energy Audits and Energy-Saving Potential Analysis of the Science Building at Xi'an Jiaotong-Liverpool University in Suzhou
Research on Sustainability Assessment of Large-Scale Public Building
Stability Analysis of the Pile Considering Gravitational Stress
Temperature Sensitivity Analysis of Large Span PC Concrete Box-Girder Bridge
DEA Based Performance Evaluation Model of Green Construction Supply Chain
New Perspective of Low-Carbon Building Materials
The Energy-Saving Research of Southward Balcony in Heating Area
The Measures of Green Development on Real Estate in China
A Design Methodology for Pile Foundation of Frame-Type Levee
A Nonlinear Finite Method for Analysis Cable Structures’ Displacement
Experiment and Finite Element Simulation Analysis about Temporary Bracing
Study on Dispersive Influencing Factors of Dispersive Soil in Western Jilin Based on Grey Correlation Degree Method
Study on Thermal Environment of Direct Gain Solar and Heating Rooms
Application Analysis of Small Sound Barrier on Soundproof Windows under Line and Point Sound Sources
Determining Preconsolidation Pressure of the Lakeside New District Soft Clay of Hefei Based on Casagrande Method by Matlab
Research Status of Local Stability in the Web of Castellated Components
The Arch Support Construction and Hydration Heat Analysis of the First Bridge over Yangtze River in Hejiang
The Study on the Calculation Method of Energy Savings of Heating System in China
A Method of Calculation on the Deformation of Column Piles in Deep Foundation Pit
Analysis on Deformation of Foundation Excavation Considering of Time-Space Effect
An Economic Analysis of a New and Renewable Energy System Installed at a Public Building
Parametric Analysis of Temperature Gradient about Concrete Box Girder
Simulation and Economic Analysis of the Soil Temperature Field when Concrete Heat Accumulation Piles Buried in Different Modes
Experimental Research on the Heat Transfer and Mechanical Property of Phase Change Material Wallboards
The Experimental Research on the Thermal Properties of Shape-Stabilized Phase Change Materials
Role of Corrosion in Life-Cycle Performance Evaluation of Existing Buildings with Steel Moment Resisting Frames: I
Shrinkage of New Concrete Restrained by Old Concrete Based on Interface Roughness
Application of Composite Sandwich Panels in Construction Engineering
Numerical Simulation on the Vertical Bearing Capacity of Large-Diameter Thin-Wall Tubular Pile with Rib
Chapter 10: Development and Management of the Energy and Resource Industry
Research of Development Policy for Renewable Energy Industry
Empirical Analysis on Energy Forecast of China
An Empirical Analysis of Time Window for Energy Consumption Inflection Point in China
Inverted U Curve in Economic Growth and Energy Consumption: Evidence from China
Study on the Development Path of the New Energy Industry of Ningbo
The Research and Implementation of Beijing Energy Policy Simulation System
The Influence of FDI on Energy Efficiency of China: An Empirical Analysis Based on DEA Method
Energy Consumption Reduction Decomposition Model Based on Input-Output Analysis and Comprehensive Evaluation
Study on City Energy Plan and Control
Study on Performance Evaluation System of R&D Team of New Energy Enterprises
The Application of Knowledge Discovery Model in Energy-Economy-Environment Sustainable Development Research
Analysis of Energy Efficiency in China with a Slack-Based Directional Distance Function Approach
Study on Issues of Technical Upgrading and Sustainable Innovation of Energy Industry in Henan Province
Causality between Energy Conservation and Economic Growth in China
The Game Analysis and Measures of Sino-Russia Oil Project Cooperation
Petroleum Enterprise Safety Investment-Benefit System of Gray Relational Analysis
The Evolution of Loss Aversion Coefficient in Energy Futures Market Considering Investor Heterogeneity
Development of Environmental Regulation in Energy Industry of China a Comparative Perspective
The Empirical Research on Energy Conservation and Emission Reduction Situation of SMEs in Zhejiang Province - A Case Study of Ningbo
Efficiency Evaluation of Energy Saving & Emission Reduction: Application of DRF and the SE-DEA Model
Technical Analysis on Energy Consumption of Chinese Household (1990-2009)
The Heterogeneity of Sectors and Related Efficiency of Differential Energy Consumption
Growth Ceiling of Energy Efficiency and Countermeasure Archetype in Electric Power Supply and Demand System
Energy Consumption, Conservation and Emissions Reduction Research of Beijing
Software Solution Implementation for Regional Balancing Mechanism of Electrical Energy
Decomposition of Overall Specific Energy Consumption over 1990-2010 in China’s Cement Industry
Research on the Formation Mechanism and Dynamic Factors of Commercial Housing Prices Based on the Correction Carey Model - Panel Data from Thirty-Five Key Cities
Selecting Sustainable Renewable Energy Sources by Using a New Synthesis Method of Alternative Priorities for Benefits, Opportunities, Costs and Risks
Preliminary Research on Energy Consumption in Machinery Manufacturing Industry in China Based on Input-Output Analysis Method
Research of Residents Cognitive and Attitude towards Renewable Energy
Comprehensive Evaluation of Power Quality Based on the Integration of Rough Set and Evidence Theory
Research on Energy Development of Mid-West Region in China and Regional Economic Development
Chapter 11: Ecological Economy, Circular Economy, Low-Carbon Economy and Eco-Tourism Applications
Study on Dynamic Change of Carbon Emission in Zhengzhou
The Estimation of Appropriateness for CO2 Geological Sequestration Based on Well Logging
Analysis of Energy Use and Related Carbon Emissions in Beijing and Shanghai
Emission Reduction and Economic Impacts of us Carbon Tariffs on China: Based on CGE Model Analysis
Carbon Emission Factor Decomposition Model and Empirical Research of Inner Mongolia Based on LMDI
Strategy for Carbon Dioxide Reduction – A Case Study of China
Research on Spatial-Temporal Characteristics and Affecting Factors Decomposition of Agricultural Carbon Emission in Suzhou City, Anhui Province, China
Study on Low-Carbon Development Status Quo and Countermeasures of Transportation in Shandong Province
Study on Low-Carbon Emission Economic Pattern Based on Transformation and Upgrading of Zhenjiang's Industrial Structure
Assessment on the Possibility of Low-Carbon Economic Development - Taking Zhejiang, China as a Case Study
Carbon Efficient Supply Chain Management: Literature Review with Extensions
China’s Low-Carbon Economy Development: A Policy Suggestion
Research on China's Low Carbon Economy Financing and Investment
The Performance and Development Trends of Low-Carbon Textile Materials
A Study on the Decoupling between Economic Growth and Carbon Dioxide: A Case on the Shanxi Province
Research on Low-Carbon Tourism Development in Qinghai Province of China Based on Stakeholder Theory
Exploring the Changes of Carbon Emissions Performance Using Data Envelopment Analysis
New Iron and Steel Industry Development Path Choice under the Restriction of Low Carbon Economy in Shandong Province
New Petrochemical Industry Development Path Choice under the Restriction of Low Carbon Economy in Shandong Province
A Research on Eco-Tourism Development Models Based on the Stakeholder Theory
Pattern of China’s Eco-Tourism Resources in Low Carbon Economy
Study on the Status and Development Strategy of Low-Carbon Economy in the Northeast Old Industrial Base
The Devolopment of Eco-Tourism with Convergence Theory
The Institutional Guarantee of Eco-Tourism Resources Value Compensation Mechanism
Dynamic Analysis on Carbon Footprint of Energy Utlization in Guangdong Province
Analysis on Green Hotel Marketing Management under the Background of Circular Economy
Analysis on the Effectiveness of Supportive Policies for Roof-PV-Scheme Dissemination in P.R. of China
Ecological Civilization Construction of Eroded Red Soil Region of South China: A Case of Changting
Analysis on China's Energy Low Carbonization under the Background of Industrialization
Mode Research of the Coal Enterprise Low Carbon Management
Variation Characteristics of Artificial Grassland Carbon Storage in the Underground
Resource Allocation Optimization Problem on the Population Growth Model
Review of Power Loss Calculation and its Trend of in Low Carbon Economic Situation
Chapter 11: Ecological Economy,Circular Economy, Low-carbon Economy and Eco-Tourism Applications
Economic Development: Environmental Friendly Materials or High-Carbon Materials Produced by who?
Estimating the Rebound and Reduce Effect of Low Carbon Policy in Shanghai Industrial Sectors
A Study of the Relationship between Environment Protection and Increase of Foreign Exchange Reserves
Green Economy on Small and Medium Enterprise's Sustainable Development Analysis - For Example to Changsha-Zhuzhou-Xiangtan City Cluster
The Construction of Bus Operation Cycle
Cluster Analysis of Industrial Transfer Park Based on Carbon Emission Intensity
Using LMDI Method to Analyze the Energy-Related CO2 Emissions in Guangdong Province, China
An Exploration of Provincial Low-Carbon Economy Evaluation System Based on Principal Component-Variable Fuzzy Evaluation
Necessity and Feasibility to Develop Circular Economy in West Regions
Based on Comparable Price Energy Input-Output Table of Xinjiang to Research Low Carbon Economic Development Strategy
Research on Low-Cardon Development of China’s Coal Industry
The Product Development and Brand Strategy for Low Carbon Clothing
Bottleneck at Promoting Strengths of Tourism-Culture Integration in Ancient Town Cicheng and Enlightenments for Development
Study on the Policy Framework for the Development of Green Industry
Optimization Research on Carbon Emissions and Energy Structure of Responding to Climate Change
Sustainable Development Path for the Rare Earth Industry under the Background of Trade Disputes
Research on the Sustainable Development Based on PREES Model of Beijing
Simulated Analysis of Impacts of Alteration of Mineral Resource Tax Policies on Economic Growth Based on Input-Output Method
Economic Growth, Energy Consumption and Carbon Emissions in China: A Cointegration Analysis
Chapter 12: Thermophysics, Thermal, Heat Engineering and Dynamics, HVAC and Refrigeration
Thermal Simulation of Plate-Fin Heat Exchangers
Development and Characterization of Small-Scale ORC System Using Scroll Expander
Analysis of Air Cycle and Efficiency Evaluation for a Blast Freezing Tunnel Plant
CFD Turbulent Model and Grid Dependency of Hypersonic Aerodynamic Heating Calculation Accuracy
OAHT System Built and Off-Design Performance Analysis
Suppressing Knock of the Dual-Fuel Engine by Injection Timing under Pressure Boundary Conditions
The Application and Evaluation of the Heat Medium Heater in Changqing Oil Field Production
Effects of Non-Uniform Circumferential Heating and Inclination on Critical Heat Flux in Smooth Round Tubes
Studying on the Polymorphs and the Melting Point of HMP
Economic Analysis of the Absorption Heat Pump in Supercritical Unit
Influence of Temperature Parameter Change on Lithium Bromide Absorption Heat Pump Performance
Numerical Simulation and Optimization on the Variable Oxygen of a 3000 T/H Ultra-Supercritical Boiler
Optimal Simulation on the Variable Load for an Ultra-Supercritical Boiler
Heat Pump Heating Systems Combined with Solar Energy and Lake Water Source for the Biogas Digester
Numerical Simulation of Heat Transfer Characteristics of Melting Process of Paraffin Heat Storage Ball
A Testing Facility for Refrigerating Plants Equipment Working with New Fluids
Application of Mine Water for Water-Source Heat Pump System
Technical and Economic Analysis of 150MW Turbine Unit about Two Reconstruction Modes for High Back Pressure Heating
Discuss on Post Combustion Characteristics of the 116MW Circulating Fluidized Bed Hot Water Boiler
Combustion Characteristics of a Helmholtz-Type Valveless Self-Excited Pulse Combustor
The Experimental Investigation on the Internal Temperature Field of Regenerative Burners
Ground Source Heat Pump Air Conditioning System of Vertical Geothermal Heat Exchangers Heat Transfer Process and Design Calculation Method
Simulation and Experimental Verification of Dynamic Heat Load for the Underground Structure Envelope
The Comparative Analysis of R22 and R134a Applied in a Five-Stage Auto-Cascade Refrigeration System
The Preliminary Study on Mixed Refrigerants of a Four-Stage Auto-Cascade Refrigeration
The Research of Indoor Thermal Comfort under Dynamic Conditions
Computational Simulation and Experimental Research of Heating System for a Field Shower Equipment
Heat Transfer Coefficients and Dynamical Thermal Models for Variable Flow Rates in Pipes and Ducts
Study of Economic Specific Frictional Resistance in Hot Water Heat Supply Net Work in Xi’an
Integration of Multiple In-House Heat Stations into One Energy Flexible Heat System
LCCP Evaluation on Environmental Impact of Air-Conditioning Cold and Heat Source
The Air Conditioning System of a Large Public Building Energy Consumption Simulation Research
A New Operating Mode of Air-Conditioning Systems with Thermal Storage
Energy Saving Analysis on Application of Condensing Heat Recovery to Constant Temperature/Humidity System
Steady State Model of Screw Chillers Suitable for Variable Conditions Simulation
The Influence of Oversized Boilers on Power Efficiency, Energy Consumption and Cost in Energy Flexible Heat Stations. Part 1
The Influence of Oversized Boilers on Power Efficiency, Energy Consumption and Cost in Energy Flexible Heat Stations. Part 2
Investigation of the Heating Characteristics in a Reheating Furnace with Pulse Combustion
The Decision-Making Model of Air-Conditioning Options Based on Time-of-Use Electric Policy
The Systems Emulation Study of the Dynamic Heat Load for Underground Structure Envelope
A Fault Diagnosis Model and its Application in Chiller Operating
System Optimization and Exergy Analysis of Air Conditioning System for Data Center
The SMER Simulation Solution of Air Volume on the Effects of Dehumidifier
Study and Theoretical Calculation on New Type of Adsorption Chiller
On-Line Fan Monitoring System Based on Improved Intelligent Regression Algorithm
Humidity Distribution Simulation of Passenger Vehicle Cabin
Application of Genetic Algorithm in Hydraulic Calculation of Capillary Air-Conditioning System
Chapter 13: Systems of Power Machinery and Fluid and Flows Dynamic Machinery
Design and Experimental Study on the Urea-SCR Converter Exhaust System of the Marine Diesel Engine
A New Type of Solving Method for Reliability Model Parameter Optimization
A Study of a Hydrogen Enriched LPG Intake Liquid Injection Engine
A Study of Bio-Diesel Application on 6L20(27) Diesel Engine
A Study on the Effects of EGR on the Performance of Bio-Diesel Engines
Experimental Study of Coal Liquefaction Diesel Combustion and Emissions
A Study on Reducing the NOx Emission of the L21/31 Medium-Speed Marine Diesel Engine for IMO Tier Emission Legislation
Numerical Simulation of Fuel Consumption of Vehicle Cold Start in Low Temperature
Pressure Drop in Horizontal Taper Pipe of Dense-Phase Pneumatic Conveying
Modeling and Stability Analysis of Hydraulic System for Wave Simulation
Study on the Flow Characteristics of Transverse Injection in Cavity
Analysis of Resistance Loss’s Impact Factors in Ash Transportation System
Numerical Simulation of Interactions between Waves and Pendulum Wave Power Converter
CUDA Based Numerical Simulation of Cavity Flow and Performance Analysis
Numerical Simulation of Blade Channel Vortex in a Low Head Francis Turbine
Numerical Simulation of Cavitating Turbulent Flow in a Francis Turbine with Draft Tube Natural Air Admission
Numerical Simulation on Fouling of the Steam Cooler in a Power Plant
The Prospective Analysis of Marine Dual Fuel Engine Application Based on Emission and Energy Efficiency
Numerical Simulation of Muzzle Flow Field of Gun Based on CFD
Moment of Lignocellulosic Materials Ignition Defined by Critical Mass Flow Rate
A New Device for Increasing Output of Marine Current Energy
Working Condition Diagnostics System for Electrical Submersible Pump in Geothermal Well
Molecular Dynamics Simulations of Thermal Transport at the Nanoscale Solid-Liquid Interface
Chapter 14: Smart Grid Technologies
DSP - Based Islanding Protection for Photovoltaic Grid Connected Inverter
A New Buck/Boost Bidirectional DC/DC Converter Base on Soft Change Current Network
Economic Operation Assessment of Micro-Grid Combining Photovoltaic and Energy-Storage
Optimal Planning of Distribution System Considering Distributed Generators
Solar Photovoltaic Grid-Connected Key Technology
Study on DLCC Network for Networking Power Quality Monitoring System in Smart Distribution Grid
Application of PLC in On-Line Monitoring and Diagnosis for XLPE Cables
Dynamic Simulation for Grid-Connected Inverters of Distributed Generation Based on DIgSILENT Software
Research on Plug&Play Technology for Smart Grid Information Exchange Bus
Reformative Arithmetic for Non Detection Zone Islanding Detection Based on the Voltage Shift Technique
Research of Grid-Connected Operation Control of PV Cells in Microgrid
Research on Control of Information Flow in Smart Distribution Grid
Review of Smart Grid Development in China
Research on Ontology Modeling Method of Smart Grid
Support Vector Machine Based Voltage Relays for Voltage Disturbance Detection in Micro-Distribution Systems
Role of Government on China Smart Grid Construction
Using Smart System to Improve Electric Power Grid
Discuss Hydrogen Production in Jiangsu Province Using Non-Grid-Connected Offshore Wind Power
New Development in Relay Protection for Smart Grid – Protection Function Development
Sizing and Locating of Distributed Generations Based on Chaos Particle Swarm Optimization Algorithm
Control of Quasi-Z Source Inverter with Super Capacitor under Unbalanced Grid Fault Conditions
Smart Home Design Based on Wireless Transmission Technology
Chapter 15: Power System, Automation and Control
Application Research on Lightning Rod for Shielding Failure Prevention Based on JG and ZGUT Type Tower
Assessment of State of Urban Power Supply Systems’ Power Transmission Lines on the Basis of Indicative Analysis
Design of Transformer Temperature Measurement System Based on Fiber Grating
Dynamic Economic Emission Dispatch Using Multi-Objective Hybrid Evolutionary Algorithm
On-Line Parameters Identification for Excitation System Based on Small Population-Based Particle Swarm Optimization
Research on SVM Line Loss Rate Prediction Based on Heuristic Algorithm
Structural Vulnerability Evaluation Model Based on Improved Electrical Betweenness
Study on the Dynamic Benefits of Pumped Storage Power Station
A Study of Fixed Steam Pressure Control of Ultra-Supercritical Unit
Application of Traps in Detection of Temporary Ground Wires
Improve the Frequency Quality of Power System Using Decentralized Intelligent Loads
Method for Computing Power Flow of Distribution Network with Distributed Generation Based on Improved Initial Value Choice
Network Partition and Pilot Nodes Selection for Reactive Power / Voltage Control Based on the Complex Network Theory
Pattern Recognition Based on Integrative Vulnerability Mode for Elcctric Power Grid
Preliminary Study on Indexes and Assessment Method for Power Grid Development Diagnosis
Research on Method for Obtaining Time Difference of Localization of Transformer PD Source
Series Reactance Rate Design of Shunt Capacitor with the Current-Limiting Reactor in Consideration Based on Particle Swarm Algorithm
Tracking Performance Optimization of Compensation Current in Active Power Filter
Ultra-Supercritical Power Unit Steam Temperature Control Based on Model Predictive Control
A Single-Ended Transient Based Voltage Protection Method of UHVDC Transmission Line which Distinguishes the Opposite Side’s Internal and External Fault with Protectors
Analysis of LVRT Influence on the Neighboring Wind Farm and a New Protection Scheme for DFIG
Application of an Improved Immune Algorithm in Generation Expansion Planning
Research about Voltage Support of Distribution Network with Distributed Generation
Simulation Study on Transient Response of UHVDC Transmission Line Fault
Transformer Winding on-Line Monitoring and Diagnosis Using Current Source Method
Electric Power System Low Voltage Risk Assessment Based on the Utility Theory and Node Importance
Integrated Simulation Platform Based on Multi-Source Data
Modeling and Simulation of the Automatic Transmission Assembly Using Matlab/Simulink
Research on the Frequency Dynamic Characteristics and UFLS Scheme in Shanghai Subzone Power Grid
Short-Term Wind Speed Forecasting Based on Time Series-State Transition Method
An Active Power Filter Controller Based on Dual-DSPs in Low-Voltage Power System
Application of Functionally Graded Materials for Solid Insulator: Fabrication, Optimization Design, and Surface Flashover of Prototype Samples
Atmospheric Corrosion Study on High-Voltage Overhead Power Transmission Line
Compensation of Phase Modulation Disturbance in All Fiber-Optical Current Transformer
Chapter 15: Power System, Automation and Control
Separation Research of Ultrasonic Wave in Transformer Partial Discharge Based on Improved Waveform Matching
Research of Cable PD Detected Technology Based on Variable Frequency Oscillation Wave
Risk Assessment of Power Transformer Life Cycle Cost Based on Analytical Hierarchy Process
Power Factor Detection Methods Based on Atmega128
Overview of Ontology-Based Power System Applications
The Research of the Internet of Things Technology Applied in Electric Power Communication Equipment Life Cycle Management
Study of Efficiency Power Plant Based on Benefit Sharing Model
The Study and Design of Electric System for Photovoltaic Generation Mix Charging Station
Early-Warning System for Power Coal Storage and Supply Margin of Henan Province
Investigation on the Mode of Investment Management and Value Compensation in Pumped Storage Power Plant
Reliability Parameters Forecasting for Transmission Lines Based on Principal Component Regression
A Weather Dependent Failure Rate Model for Overhead Lines
Improvement of Box-Type Substation for Port
Fuzzy Control of Deaerator Water-Level in Nuclear Power Station Based on MATLAB/Simulink
Reliability Enhancement Test on Undercarriage Signal Light Box
A Minimum-Energy Consumption Control Algorithm for Omni-Directional Mobile Robots
Periodic Solution of a Class Predator-Prey System with Rate Stocking and Time Delay
Research on Pressurizer Pressure Control System Based on BP Neural Network Control of Self-Adjusted PID Parameters
Synchronization of Laser Measurement Technology Application on Automatic Orientation
Analysis and Calculation of Substation’s Internal Electric Field Intensity Caused by Incoming and Outgoing Lines
The Applied Research of the Hilbert-Huang Transform and Wavelet Transform in the Fault Location of Transmission Line
A Method of Detecting Wave Grade Based on Visual Image Taken by USV
Research on Control Strategy of Electronic Ballast for Electrodeless Lamp
Research on Current Control of Photovoltaic Grid-Connected Inverter
A Novel Control Strategy Based on Virtual dc Voltage Feedback for an Improved Three-Phase to Single-Phase Matrix Converter
An Improved Harmonic Current Detection Method Based on Variable Forgetting Factor RLS Algorithm
Separated-PI Control Strategy and Stability Analysis of a Single-Phase Inverter Connected to the Grid with a LCL Filter
Study on the CFBB Main Steam Pressure Control System Based on ADRC Technology
A Novel Technique for Eliminating Probe Lift-Off in Eddy Current Nondestructive Testing
Control Chart Pattern Recognition Based on Wavelet Analysis
Eddy Current Detecting of Leak Hole in Pipeline by Wavelet Packet Signal Analysis Method
A Gait Feature Extraction Algorithm Based on Fusion of Spatial and Frequency Feature
Parameter Optimization of Steam Generator Feedwater Controller Based on Particle Swarm Optimization
Layered, Partition, Local Equilibrium of Reactive Power Compensation
Chapter 16: Electronics, Electrical Engineering and Power Drives Applications
Research on the Steady Voltage of Permanent-Magnet Generator with Pressure Roller on the Vehicle
Study on Design Process of the Mechanical and Electrical Products
The Power Drive Circuit for a Switched Reluctance Motor Based on C8051F310
Design of Power Harmonic Analyzer Based on LabVIEW and HHT
Variability Analysis of Pi Network Impedance Matching
Adaptive Multi Path Routing Protocol for Heterogeneous Multi-Hop Wireless Sensor Network
ARM Based Low Cost Integrated Navigation System Technology Research
Influence of Harmonic on the Protections of Capacitor Bank
Breaks Strip Breakdown with the Parameter Identification Law Diagnosis Mouse Cage Asynchronous Motor Rotor
Research on Bi-Directional Inverter of Wind-Solar-Diesel Hybrid Generation System
Design of Fault Diagnosis Expert System of Transformer
Research on Identification of Voltage Interruption and Voltage Dips in HHT
Ultrasonic Flowmeter Based on FPGA
Stand-Alone Power System for Monitoring and Control of the Temperature
Chapter 17: Materials and Products Manufacturing Technology
Microstructure and Corrosion Behavior of AZ91-0.4%Nd Magnesium Alloy
The Acoustic Character Analysis of the Sandwich Composite Structure with Cavum in Water Backing
Co/ZrO2-Al2O3 Catalysts with Bimodal Pore Distribution for Fischer-Tropsch Synthesis
Chemical, Structural, Mechanical and Intergranular Corrosion Characterization of Welded Pipes Joints Made of TP 347 Steel
Corrosion Failure Analysis of 35CrMo Bolt in Wet Hydrogen Sulfide Environment
The Present Research State and Perspective of the Titaniferous Blast-Furnace's Complex Utilization
Effects of the Laser Power on the Microstructure and Microhardness of the Carbonitrided 45 Steel
Influence of TiO2 and Comprehensive Alkalinity on the Viscous Characteristics of Blast Furnace Type Slag
Experimental Study on Desilication of the High-Phosphorus Hot Metal
Experimental Study on Alkali Decomposition of Low Grade Tungsten Concentrates under Microwave Heating
Static Analysis and Structure Optimization Based on Ansys for a Large Chamber of Vacuum Electron Beam Weld
Effects of Lattice and Thermal Mismatch Induced by Different Seed Layers on (Na0.8K0.2)0.5Bi0.5TiO3 Ferroelectric Thin Film
In Situ Test on Effective Stress Principle for Ultra Soft Soil
Composition Design, Microstructure and Properties of Ultra-High-Strength Steel Using for Energy Storage Flywheels
Process Performance Measures of Mould Steel Cr12
Effects of Mixing Parameters on Tensile Strength of TPU/NR Blends
Experimental Study of Remolded Unsaturated Soil Subjected to Wetting Load under Constant Compression
Further Reduction of Normal Forms for High Dimensional Nonlinear Systems and Application to a Composite Laminated Piezoelectric Plate
Palm Oil Polyol/ Polyurethane Shape Memory Nanocomposites
Feather Model and Application
Plastic Deformation Simulation on Compound Twist Extrusion Process for Metal Materials
Microstructure and Interface of TiC In Situ Synthesized Reinforced Steel-Based Surface Composite Prepared by V-EPC Infiltrating Method
Prediction Welding Quality in Multi-Pass Welding Process Using Mahalanobis Distance Method
The Effects of N2 Flow Rates on the Properties of Ti-Al-Si-N Films Deposited by Arc Ion Plating
Technical Properties and Economic Feasibility of Recycled Concrete
Studies on the Modeling Morphology and Development Trend of Volkswagen Golf Cars
Design Scheme Evaluation and Sensitivity Analysis of Product Based on Grey Relation
The Transformation and Optimization to Desulfurizer Preparation System
A Human Finite Element Model for Human-Cushion Interface Pressure Research
Experience of Automobile Industry Development in Japan and its Implication to China
Simulation Study of the Ultrasonic Attenuation Measurement of Particle Concentration
Establishment of the Print-Through Forecasting Model Based on the Optical Density Difference and its Application
Effects of Al on the Flat Band Potential of Nanostructured TiO2 Electrodes
Direct Writing Micro-Structure on 65Mn by Femtosecond Laser
Research on the Annoyance Rate of Vehicle Vibration Serviceability
Load Effect on 1Cr18Ni9 Stainless Steel Wires’ Fretting Behaviors in Metal Rubber Dampers
Measurement of Luminance Coefficients of the Road Pavement for Different Lamp Sources
The Metal Foams Modelling with Anisotropic Cells
Synthesis and Characterization of ZnAPSO-34 Membrane on Porous α- Al2O3 Support
Combination of Carbon Nanotube and Alumina by Plasma Chemical Coating
Chapter 18: Development Computer Applications in Industry, Networks Applications
The Software Design of Aging Test System for Rechargeable Battery Based on LabVIEW
A Bayesian Network Method for Automatic Classification of Eddy Current NDE Signals
NPD Management Model Based on Ecological Lifecycle Theory
An Improved Frequency Conversion Constant Pressure Water Supply Algorithm
Comprehensive Evaluation Method for the Product’s Disassembly Sequences Based on Information Entropy
Power Grid Business-Oriented Management Tools of Application Service
The Analysis of Recommendation Method in EC Based on Interest Association Rule
The Review of Cache Application Technology in CMP
A New Wavelet Digital Watermarking Algorithm
Case Study on Business Model Innovation of Online Group-Buying Enterprise - Juhuasuan
Soft Sensing Based on EMD and Improved PSO-SVM
An Assessment of the Accuracy of Cost Estimation Using Building Information Modeling in Design Process
Campus Network Security Analysis and Practice
Implementation of PPP Protocol in μC/OS- II Operating System
Normalized Acquisition System of the Facial Diagnosis in Traditional Chinese Medicine
The Study of Symbiosis Question of Clusters Enterprise Value Chain in the “Post Crisis Era” - A Perspective Based on Value Network and Grid
Context Ontology Modeling for Mobile Petrol Station Recommendation
The Webpage Classification Research of Maximum Entropy Basing on Knowledge Tree
A New Method of Denoising by Reserving Edges for SAR Image
Analyzing and Researching of the Economic Utility of Information Resource Configuration Based on Cloud Computing
An Improved Canny Edge Detection Algorithm
Study of Greedy Genetic Algorithm for Multi-Objective Optimization
The Comparative Study of Grain-Size Parameter Derived from Graphical and Moment Methods
The Research of Cross-Layer Architecture for Cognitive UACN
A Fuzzy Buffer Setting Method for Project Scheduling under Uncertainty
A Novel Reliability-Driven Heuristic for Grid Task Scheduling
A Study of Transport-Oriented Development (TOD) Based on the Frequency Scale-Fuzzy Comprehensive Evaluation Method
Application of a New Improved Ant-Algorithm in TSP
GPS Signal Acquisition Based on an Improved Genetic Algorithm
Research and Design of AVS Video Decoder Bit Rate Control
Research on Building the Standard System of Modern Agriculture Information Resources Classification and Coding
Risk Identification and Evaluation of Customs Management Based on Fuzzy Neural Network Algorithm
Application of GSBSI Theory for Calculating the Relationship between R&D Investment and Economic Growth in China
The Development and Improvement of China’s Golden Taxation Project
The Parallel Design and Implementation of the PCNN Algorithm Based on the Visual Perception Information
Error Analysis of Approximate Ripple Borrow Subtractors
Research and Design of Mixed Fieldbus System
Chapter 19: Engineering and Manufacturing Management, Applications of Education and Industry
The Research on Iron and Steel Enterprises Operation Model Based on the Characteristics of the Accessories Resources
Rapid Prototyping Machine in Teaching Practice and Application
Green Education Project Evaluation and Development Path under Low-Carbon Context
On Synergy of Management Innovation and Technological Innovation of Enterprise, University and Research
Research on Renewable Power Technology Training Course for Employees of the Grid
Technology Sophistication and Industrial Diversification are the Key for Global Manufacturing Competitiveness
The Construction of Informatization Performance Measurement Indicator System for Small-and-Medium Sized Enterprises
The Schedule Control of Nuclear Power Construction Phase of Project Approval and Administrative Licensing
Three-Dimensional Decomposition Models for Chinese Manufacturing Subsector over 1996-2008
Analysis on the Mechanism of Knowledge Alliance of University Industry Research Institute
Empirical Analysis of Operational Efficiency of China’s Telecommunication Industry: Based on DEA Approach
Evaluating Construction Workers’ Understanding of Safety Signs
On the New Model of School-Enterprise Cooperation Implemented by Industry Background Colleges and Universities - A Case of Shanghai Dianji University
A New Grey Bass Equation for Modelling New Product Diffusion
Study on States and Development of ESD in China - Sustainable Development as Strategic Aim for Higher Education
The Interactions between Producer Services and Manufacturing: An Empirical Analysis Based on Input-Output Subsystem Model
Theoretical Research on Obstacles of Organizational Learning and Self-Transcendence in Chinese Family Business
A Discussion on the ‘Engineering + Business’ Inter-Disciplinary Talents Cultivating Model - Taking Zhejiang University City College as an Example
Washington State Higher Education Coordinating Board's Functions and its Historical Value
Green Experiment and Green Network
Multidimensional Scaling and Application in Traffic Jam Prediction
Reihe/Serie | Applied Mechanics and Materials |
---|---|
Zusatzinfo | Illustrations, unspecified |
Verlagsort | Zurich |
Sprache | englisch |
Maße | 170 x 240 mm |
Gewicht | 6200 g |
Themenwelt | Technik ► Elektrotechnik / Energietechnik |
Technik ► Maschinenbau | |
ISBN-10 | 3-03785-634-3 / 3037856343 |
ISBN-13 | 978-3-03785-634-5 / 9783037856345 |
Zustand | Neuware |
Haben Sie eine Frage zum Produkt? |
aus dem Bereich