Device Modeling for Analog and RF CMOS Circuit Design (eBook)
312 Seiten
Wiley (Verlag)
978-0-470-86434-0 (ISBN)
- Bridges the gap between device modelling and analog circuit design.
- Includes dedicated software enabling actual circuit design.
- Covers the three significant models: BSIM3, Model 9 &, and EKV.
- Presents practical guidance on device development and circuit implementation.
- The authors offer a combination of extensive academic and industrial experience.
Trond Ytterdal received the M.Sc. and Ph.D. degrees in electrical engineering from the Norwegian Institute of Technology, University of Trondheim, Trondheim, Norway, in 1990 and 1995, respectively. From 1995 to 1996, he was a Research Associate with the Department of Electrical Engineering, University of Virginia, Charlottesville. from 1996 to 1997, he was a Research Scientist with the Electrical, Computer, and Systems Engineering Department, Rensselaer Polytechnic Institute, Troy, NY. from 1997 to 2000, he was a Senior ASIC Designer with Nordic VLSI, Trondheim. Since 2000, he has been on the faculty of the Norwegian University of Science and Technology (NTNU), Trondheim.
He is the author of more than 100 scientific papers in international journals and conference proceedings. He is a coauthor of the books Semiconductor Device Modeling for VLSI (Prentice Hall, 1993), Introduction to Device Modeling and Circuit Simulation (Wiley, 1998), and Device Modeling for Analog and RF CMOS Circuit Design (Wiley, 2003). He has been a contributor to several other internationally published books. He is also a co-developer of the circuit simulator AIM-Spice. His current research interests include design of analog and mixed-signal integrated circuits, modeling of deep sub micrometer MOSFETs, MESFETs, HFETs, and novel device structures for application in circuit simulators.Prof. Ytterdal is a member of the Norwegian Academy of Technological Sciences.
Bridges the gap between device modelling and analog circuit design. Includes dedicated software enabling actual circuit design. Covers the three significant models: BSIM3, Model 9 &, and EKV. Presents practical guidance on device development and circuit implementation. The authors offer a combination of extensive academic and industrial experience.
Trond Ytterdal received the M.Sc. and Ph.D. degrees in electrical engineering from the Norwegian Institute of Technology, University of Trondheim, Trondheim, Norway, in 1990 and 1995, respectively. From 1995 to 1996, he was a Research Associate with the Department of Electrical Engineering, University of Virginia, Charlottesville. from 1996 to 1997, he was a Research Scientist with the Electrical, Computer, and Systems Engineering Department, Rensselaer Polytechnic Institute, Troy, NY. from 1997 to 2000, he was a Senior ASIC Designer with Nordic VLSI, Trondheim. Since 2000, he has been on the faculty of the Norwegian University of Science and Technology (NTNU), Trondheim. He is the author of more than 100 scientific papers in international journals and conference proceedings. He is a coauthor of the books Semiconductor Device Modeling for VLSI (Prentice Hall, 1993), Introduction to Device Modeling and Circuit Simulation (Wiley, 1998), and Device Modeling for Analog and RF CMOS Circuit Design (Wiley, 2003). He has been a contributor to several other internationally published books. He is also a co-developer of the circuit simulator AIM-Spice. His current research interests include design of analog and mixed-signal integrated circuits, modeling of deep sub micrometer MOSFETs, MESFETs, HFETs, and novel device structures for application in circuit simulators.Prof. Ytterdal is a member of the Norwegian Academy of Technological Sciences.
Preface.
MOSFET Device Physics and Operation.
MOSFET Fabrication.
RF Modeling.
Noise Modeling.
Proper Modeling for Accurate Distortion Analysis.
The BSIM4 MOSFET Model.
The EKV Model.
Other MOSFET Models.
Bipolar Transistors in CMOS Technologies.
Modeling of Passive Devices.
Effects and Modeling of Process Variation and Device
Mismatch.
Quality Assurance of MOSFET Models.
Index.
"...this book will prove a valuable reference and text for engineers striving to achieve first-time right, reduced time-to-market silicon products." (IEEE Solid-State Circuits Society Newsletter, January 2004)
| Erscheint lt. Verlag | 1.8.2003 |
|---|---|
| Sprache | englisch |
| Themenwelt | Technik ► Elektrotechnik / Energietechnik |
| Schlagworte | Circuit Theory & Design • Components & Devices • Electrical & Electronics Engineering • Elektrotechnik u. Elektronik • Komponenten u. Bauelemente • Schaltkreise - Theorie u. Entwurf • Schaltungsentwurf |
| ISBN-10 | 0-470-86434-6 / 0470864346 |
| ISBN-13 | 978-0-470-86434-0 / 9780470864340 |
| Haben Sie eine Frage zum Produkt? |
PDF (Adobe DRM)Größe: 3,2 MB
Kopierschutz: Adobe-DRM
Adobe-DRM ist ein Kopierschutz, der das eBook vor Mißbrauch schützen soll. Dabei wird das eBook bereits beim Download auf Ihre persönliche Adobe-ID autorisiert. Lesen können Sie das eBook dann nur auf den Geräten, welche ebenfalls auf Ihre Adobe-ID registriert sind.
Details zum Adobe-DRM
Dateiformat: PDF (Portable Document Format)
Mit einem festen Seitenlayout eignet sich die PDF besonders für Fachbücher mit Spalten, Tabellen und Abbildungen. Eine PDF kann auf fast allen Geräten angezeigt werden, ist aber für kleine Displays (Smartphone, eReader) nur eingeschränkt geeignet.
Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen eine
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen eine
Geräteliste und zusätzliche Hinweise
Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.
aus dem Bereich
