Advanced Ceramic Coatings and Materials for Extreme Environments II, Volume 33, Issue 3 (eBook)

Dongming Zhu, Hua-Tay Lin, Yanchun Zhou, Taejin Huang, Michael Halbig, Sanjay Mathur (Herausgeber)

eBook Download: PDF

2012 | 1. Auflage
250 Seiten
John Wiley & Sons (Verlag)
978-1-118-53018-4 (ISBN)

Infos

Exploring advanced ceramic coatings and ultra-high temperature ceramic materials, this issue brings readers up-to-date with important new and emerging findings, materials, and applications. The nineteen papers in this issue originate from two symposia and one focused session held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC). With contributions from leading ceramics and materials researchers from around the world, this issue explores the latest advances and key challenges in advanced thermal and environmental coating processing and characterizations, advanced wear corrosion-resistant, nanocomposite, and multi-functional coatings, thermal protection systems, and more.

Autor

Dongming Zhu is a senior Materials Research Engineer at Army Research Laboratory, Vehicle Technology Directorate, and Durability and Protective Coatings Branch of Structures and Materials Division, at NASA Glenn Research Center. His expertise covers the areas of thermal conductivity, lattice defects and transport, high temperature oxidation, high-heat-flux testing, and mechanical behavior of ceramic coating systems, with an emphasis on experimental investigation and analytical modeling of processing, thermal fatigue and fracture behavior of advanced protective coatings and composites. His major contributions include the development of low conductivity thermal barrier coatings for turbine airfoil applications, 1650°C thermal/environmental barrier coatings for SiC/SiC ceramic matrix composite turbine vane and combustor liner applications. He has authored more than 100 archival publications and three patents. He is a member of the American Ceramic Society and ASM, International, has been a lead organizer for several International Symposia. He is currently the Chair-elect of the Engineering Ceramic Division of the American Ceramic Society, and an associate editor of the International Journal of Applied Ceramic Technology. He has received several awards from NASA and professional societies. He received his Ph.D. degree in Chemical Engineering and Materials Science from the University of Minnesota in 1996.

Inhalt

Preface ix

Introduction xi

ADVANCED THERMAL AND ENVIRONMENTAL COATING PROCESSING ANDCHARACTERIZATIONS

Multilayered Thermal Barrier Coating Architectures for HighTemperature Applications 3
Douglas E. Wolfe, Michael P. Schmitt, Dongming Zhu, Amarendra K.Rai, and Rabi Bhattacharya

Foreign Object Damage (FOD) Behavior of EB-PVD Thermal BarrierCoatings (TBCs) in Airfoil Components 19
Jennifer Wright, D. Calvin Faucett, Matt Ayre, and Sung R.Choi

Solid Particle Erosion of Thermal Spray and Physical VapourDeposition Thermal Barrier Coatings 37
F. Cernuschi, C. Guardamagna, L. Lorenzoni, S. Capelli, F.Bossi, R. Vaßen, and K. von Niessen

Effect of Hard Thin Film Coatings on Tribochemical Film Behaviorunder Lubricated Sliding Contact 47
C. Lorenzo-Martin, O. O. Ajayi, S. Torrel, N. Demas and G. R.Fenske

Rare Earth Oxides Pyrochlore Compounds by Soft Chemistry57
A. Joulia, E. Renard, D. Tchou-Kien, M. Vardelle, and S.Rossignol

Degradation of (Ni.Pt)AI Coatings by Mixture of Sodium andPotassium Sulfate at 950°C 67
Le Zhou, Sriparna Mukherjee, and Yongho Sohn

Original In-Situ Method to Quantify the SiC Active CorrosionRate and Active/Passive Transition in Ar/02 and Ar/H20 Gas Mixturesat Very High Temperatures 77
Mathieu Q. Brisebourg, Bernard Boilait, Francis Rebillat, andFrancis Teyssandier

Silicon Carbide Nanotube Oxidation at High Temperatures 89
Nadia Ahlborg and Dongming Zhu

ADVANCED WEAR-CORROSION RESISTANT, NANO-COMPOSITE ANDMULTI-FUNCTIONAL COATINGS

Evaluations of Multilayer Coatings for Galvanic CorrosionResistance Applications--Oxide and Nitride Coatings on CarbonSteel 101
C. Qu, R. Kasica, R. Wei, E. McCarty, J. H. Fan, D. D. Edwards,G. Wynick, L Lin, Y. Liu, R. E. Miller, and X. W. Wang

Acoustic Field Assisted Drying of Electrophoretically DepositedColloidal Coatings 115
Changzheng Ji and Houzheng Wu

THERMAL PROTECTION SYSTEMS

Testing of Candidate Rigid Heat Shield Materials at LHMEL forthe Entry, Descent, and Landing Technology Development Project129
Steven Sepka, Matthew Gasch, Robin A. Beck, and SusanWhite

Failure Mechanism of R-Type Temperature Sensor in ExtremeEnvironments 157
Hongy Lin and Eric Allain

MATERIALS FOR EXTREME ENVIRONMENTS

Protection against Oxydation by CVD or SPS Coatings of HafniumCarbide and Silicon Carbide on Carbon/Carbon Composites 163
A. Allemand, Y. Le Petitcorps, O. Szwedek, J. F. Epherre, N.Teneze, and P. David

Properties of Hot-Pressed Ti2AIN Obtained by SHS Process171
L. Chlubny, J. Lis, M. M. Bucko, and D. Kata

A Comparative Study of Decomposition Kinetics in Max Phases atElevated Temperature 179
I. M. Low and W. K. Pang

The Hardness of ZrB2 between 1373K and 2273 K 187
Jianye Wang, E. Feilden-lrving, Luc J. Vandeperre, and F.Giuliani

Microstructural Analysis of a C/ZrC Composites Produced by MeltInfiltration 197
Linhua Zou, Sergey Prikhodko, Timothy Stewart, Brian Williams,and Jenn-Ming Yang

TECHNOLOGIES FOR INNOVATIVE SURFACE COATINGS

Interactions between Amorphous Carbon Coatings and Engine OilAdditives: Prediction of the Friction Behavior using OptimizedArtificial Neural Networks 209
Edgar Schulz, Thilo Breitsprecher, Yashar Musayev, StephanTremmel, Tim Hosenfeldt, Sandra Wartzack, and HaraldMeerkamm

Control of Oxygen Content with Oxygen Gas Introduction inCr(N,0) Thin Films Prepared by Pulsed Laser Deposition 225
K. Suzuki, T. Endo, T. Fukushima, A. Sato, T. Suzuki, T.Nakayama, H. Suematsu, and K. Niihara

Author Index 235

Produkt-Details

• Erscheint lt. Verlag: 10.12.2012
• Reihe/Serie: Ceramic Engineering and Science Proceedings
• Reihe/Serie: Ceramic Engineering and Science Proceedings
• Sprache: englisch
• Themenwelt: Naturwissenschaften ► Chemie
• Themenwelt: Technik ► Maschinenbau
• Schlagworte: Bauingenieur- u. Bauwesen • Baustatik u. Baumechanik • Ceramics • Civil Engineering & Construction • keramische Werkstoffe • Maschinenbau • Maschinenbau - Entwurf • Materials Science • Materialwissenschaften • mechanical engineering • Mechanical Engineering - Design • Structural Theory & Structural Mechanics
• ISBN-10: 1-118-53018-7 / 1118530187
• ISBN-13: 978-1-118-53018-4 / 9781118530184